Atlanta 1116-0 Analog Quartz Travel Alarm Clock Instruction Manual

1. Product Overview

The Atlanta 1116-0 is a compact and robust analog quartz travel alarm clock designed for portability. Its durable metal casing features a protective cover that, when opened, transforms into a stable stand for the clock. The clock is equipped with a crescendo alarm, which gradually increases in volume and intensity to gently wake you.

Key features include:

• Practical travel alarm clock with protective cover
• High-quality metal casing
• Crescendo alarm: gradually increases volume and intensity
• Stable housing; the cover serves as a stand
• Compact dimensions: approximately 9 x 6 x 3 cm

2. Package Contents

Please check that all items are present:

• Atlanta 1116-0 Travel Alarm Clock
• Velvet Pouch

Note: One LR44 button cell battery is required and is not included in the package. Please purchase separately.

3. Setup

3.1 Opening the Clock

To use the clock, gently open the metal cover. The cover will fold back and serve as a stable base, positioning the clock face upright.

3.2 Battery Installation

1. Locate the battery compartment on the back of the clock.
2. Carefully open the battery compartment cover.
3. Insert one LR44 button cell battery, ensuring the correct polarity (+/-).
4. Close the battery compartment cover securely.

4. Operating Instructions

4.1 Setting the Time

On the back of the clock, locate the time setting wheel (usually the larger wheel). Rotate this wheel clockwise or counter-clockwise until the clock hands indicate the correct time.

4.2 Setting the Alarm Time

Locate the alarm setting wheel on the back of the clock (usually smaller than the time setting wheel). Rotate this wheel to set the desired alarm time. The alarm hand on the clock face will move accordingly.

4.3 Activating/Deactivating the Alarm

A small ON/OFF switch for the alarm is located on the back of the clock. Slide the switch to the 'ON' position to activate the alarm. Slide it to the 'OFF' position to deactivate the alarm.

4.4 Crescendo Alarm Function

When activated, the crescendo alarm will start with a soft, gentle beeping sound. The volume and intensity of the beeps will gradually increase over a short period to ensure a gentle awakening.

5. Maintenance

5.1 Cleaning

To clean the clock, wipe it with a soft, dry cloth. Do not use abrasive cleaners or solvents, as these may damage the metal casing or the clock face. Avoid exposing the clock to excessive moisture.

5.2 Battery Replacement

When the clock stops working or the alarm becomes weak, it is time to replace the battery. Follow the battery installation steps in Section 3.2. Always use a fresh LR44 button cell battery.

6. Troubleshooting

• Clock not working / Alarm not sounding:
  • Check if the battery is correctly installed with the right polarity.
  • Replace the battery with a new LR44 button cell battery.
  • Ensure the alarm switch is in the 'ON' position for the alarm function.
• Time or alarm setting difficult:
  • Ensure you are rotating the correct wheel for time or alarm.
  • If the wheels feel stiff, gently rotate them. Do not force.

7. Specifications

8. Warranty and Support

For information regarding warranty, returns, or technical support, please refer to the retailer where the product was purchased or visit the official Atlanta brand website. Keep your proof of purchase for any warranty claims.