1. Introduction
The Spider Farmer SE7000 LED Grow Light is a high-efficiency lighting solution designed for full-cycle plant growth in various cultivation environments. Featuring Samsung LM301H EVO diodes, this 730W bar-style LED lamp provides uniform canopy coverage and advanced control options for optimal plant development.
2. Safety Information
- Always disconnect power before installation, cleaning, or maintenance.
- Do not look directly at the LED lights when they are on. Eye protection is recommended.
- Ensure proper ventilation in the grow area to prevent overheating.
- Keep the device away from water and high humidity environments.
- This product is for indoor use only.
- Do not attempt to modify or disassemble the unit. This will void the warranty.
3. Package Contents
Verify that all components listed below are included in your package:
- Spider Farmer SE7000 LED Grow Light fixture
- Detachable driver
- Dimmer box with digital display
- RJ12 cable for daisy chain control
- YOYO hangers (ratchet ropes)
- Power cord
- User manual
Image: The package includes the foldable LED grow light, a detachable driver, a dimmer box, RJ12 cable, YOYO hangers, and a user manual.
Video: This video demonstrates the unboxing of the SE7000, showing all included components and their initial presentation.
Video: An unboxing video for the Spider Farmer SE7000 730W LED Grow Light, detailing the contents of the package.
4. Setup
4.1 Assembly and Mounting
- Unfold the LED grow light fixture. The SE7000 features a foldable design for easy setup.
- Attach the detachable driver to the fixture or place it outside the grow tent/room to manage heat.
- Use the provided YOYO hangers to suspend the light securely from the ceiling of your grow tent or room. Ensure the light is level and at the appropriate height for your plants' growth stage.
Video: This video provides a step-by-step guide for unboxing and installing the SE7000 LED Grow Light, including assembly and mounting.
4.2 Daisy Chain Connection
For commercial growing setups, multiple SE7000 lights can be daisy-chained together and controlled by a single master light. Connect the RJ12 cables from the dimmer box of the master light to the input/output ports of other lights in the chain.
Image: Illustration of multiple SE7000 lights connected in a daisy chain configuration for unified dimming control via RJ12 cables.
5. Operating Instructions
5.1 Manual Dimming
The SE7000 features a dimmer box with a digital display. Use the knob on the dimmer box to adjust the brightness level from 0-100% according to your plants' needs. The digital display will show the current brightness percentage.
Image: Close-up of the digital dimmer box, showing the knob for 0-100% dimming options and the digital display indicating the brightness level.
5.2 App Control
Download the Spider Farmer App (available on Apple Store & Google Play) to control your grow light remotely. The app offers advanced features for precise light management.
Image: A smartphone screen displaying the Spider Farmer App interface for light settings, including target PPFD, dimming range, and simulation options.
Image: Icons illustrating various app remote control features: Scheduled Light, Sunrise & Sunset Simulation, Overheat Protection, and Adjust Brightness.
Video: This video demonstrates the Smart App Control features for Spider Farmer SE & G Grow Lights, showing how to set schedules, adjust brightness, and use other smart functions.
App Features:
- Custom Light Schedules: Set precise on/off times for your grow light.
- Sunrise and Sunset Simulation: Mimic natural light patterns for gradual intensity changes.
- Remote Brightness Adjustments: Control light intensity from anywhere.
- High Temperature Protection: Automatically dims or turns off the light if the temperature exceeds a set limit.
- PPFD Mode: When paired with a compatible sensor, the light can automatically adjust brightness to maintain a target PPFD level.
5.3 Growing Tips (Reference)
The following table provides general guidelines for light intensity and duration. Adjustments may be necessary based on specific plant requirements and environmental conditions.
| Stage | CO2 | Time | Distance (from canopy) | Dimming |
|---|---|---|---|---|
| Seedling | No CO2 | 18H ON | 16" (40cm) | 20% - 25% |
| Add CO2 | 18H ON | 16" (40cm) | 20% - 25% | |
| Vegetative | No CO2 | 18H ON | 16" (40cm) | 45% - 50% |
| Add CO2 | 18H ON | 16" (40cm) | 85% - 100% | |
| Flowering | No CO2 | 12H ON | 16" (40cm) | 85% - 100% |
| Add CO2 | 18H ON | 8" (20cm) | 100% |
Table: Recommended light settings (Time, Distance, Dimming) for Seedling, Vegetative, and Flowering stages, with and without CO2 supplementation. This information is for reference only and should be adjusted according to the specific needs of the plants.
Image: A visual representation of the growing tips table, showing recommended light settings for different plant growth stages.
5.4 Light Spectrum and Coverage
The SE7000 utilizes Samsung LM301H EVO diodes to provide a full spectrum of light, optimized for all growth stages. The unique 6-bar design ensures uniform canopy coverage, especially to the outer edges of the cultivation area.
Image: Diagram highlighting the high efficiency of Samsung LM301H EVO diodes (3.14 umol/J) compared to older models.
Image: Visual representation of the optimized light spectrum, showing Warm White Light (2800-3000K) for germination, White Light (4800-5000K) for plant growth, and Red Light (660-665nm) for higher yields.
Image: PPFD map for the SE7000 in a 4x4ft grow tent, demonstrating uniform coverage and deeper light penetration at different heights and dimming levels.
6. Specifications
| Feature | Specification |
|---|---|
| Model Number | Spider Farmer SE7000 |
| Wattage | 730 Watts |
| Brightness (PPF) | 2146 umol/s |
| Efficiency (PPE) | 2.9 umol/J |
| Coverage Area | 5x5 feet (high-yielding full-cycle growth), 4x4ft (vertical farming) |
| Diodes | Samsung LM301H EVO |
| Material | Aluminum |
| Product Dimensions | 44.04"L x 45.39"W x 3.04"H |
| Item Weight | 22.9 pounds |
| Voltage | 100 Volts |
| Certifications | UL Listed |
Image: The SE7000 is ETL Listed with a PPE of 2.9 umol/J, PPF of 2146 umol/s, and a coverage area of 5x5 feet.
7. Maintenance
- Regularly inspect the light fixture and cables for any signs of damage.
- Clean the LED bars gently with a soft, dry cloth to remove dust and debris, ensuring optimal light output.
- Ensure the cooling fins on the driver are free from obstructions to maintain efficient heat dissipation.
Image: Illustration showing superior heat management with aluminum cooling fins, which reduce heat by 30% for longer-lasting, high-performance lighting.
8. Troubleshooting
- Light not turning on: Check all power connections, ensure the power cord is securely plugged in, and verify the dimmer is not set to 0%.
- Flickering lights: Ensure all connections are secure. If using daisy chain, check connections between all lights.
- App connectivity issues: Ensure your device's Bluetooth/Wi-Fi is on, the app is updated, and the light is within range. Refer to the app's troubleshooting guide for specific connection steps.
- Overheating: Check for proper ventilation in your grow area. Ensure the detachable driver is placed in a cooler location if heat is an issue. The app's high-temperature protection feature can also help manage this.
9. Warranty and Support
The Spider Farmer SE7000 LED Grow Light comes with a 5-year coverage period. During this period, any problems can be repaired at authorized local repair centers in the USA, Canada, UK, and Germany. For product issues or support, please contact Spider Farmer customer service.
