OIVO PS5 Controller Charger (Model IV-P5211B) Instruction Manual

1. Introduction

Thank you for choosing the OIVO PS5 Controller Charger. This charging station is designed to efficiently charge two PlayStation 5 or PS5 Edge controllers simultaneously. Please read this manual carefully to ensure proper setup, operation, and maintenance of your device.

2. Package Contents

• OIVO PS5 Controller Charging Station
• USB-C to USB-C Charging Cable
• 2-in-1 USB-C Charging Cable

3. Setup

1. Connect to Power Source: Connect the charging station to your PlayStation 5 console using one of the provided cables. You can use the USB-C to USB-C cable for the front USB-C port of the PS5, or the 2-in-1 USB-C cable for the rear USB-A ports. No external AC adapter is required.
2. Placement: Place the charging station on a stable, flat surface. The base features anti-slip pads to prevent movement.
3. Optional Light Control: An ON/OFF switch is located on the back of the charging dock. This switch controls the LED accent lights and indicators but does not affect the charging function.

4. Operating Instructions

1. Charging Controllers: Gently place your PS5 or PS5 Edge controllers onto the charging docks. Ensure they are properly seated for the charging process to begin.
2. Charging Time: The station is designed for fast charging, fully charging two controllers in approximately two hours when connected correctly to the PS5 console.
3. LED Indicators: Observe the LED indicators on the front of the charging station for charging status.

5. LED Indicators

The OIVO PS5 Controller Charger features clear LED indicators to display the charging status:

• Red Light: Indicates that the controller is currently charging.
• Blue Light: Indicates that the controller is fully charged or in standby mode.

A front blue strip light on the station will blink during the charging process.

6. Safety Features

The charging station incorporates a smart protective chip to ensure safe and reliable operation:

• Short-circuit Protection: Prevents damage from electrical shorts.
• Over-temperature Protection: Safeguards against overheating.
• Input Over-voltage Protection: Protects from excessive input voltage.
• Output Overcurrent Protection: Prevents damage from excessive output current.

7. Maintenance

• Keep the charging station clean and free from dust. Use a soft, dry cloth for cleaning.
• Avoid exposing the device to water or excessive moisture.
• Do not attempt to disassemble or repair the unit yourself. Contact customer support for assistance.

8. Troubleshooting

Issue: Controllers are not charging.

Solution: Ensure the charging station is securely connected to the PS5 console. Verify that the controllers are properly seated in the charging docks. Check if the power source (PS5 console) is on.

Issue: Charging is slow.

Solution: Confirm that you are using one of the provided cables and that it is connected to a suitable USB port on the PS5 console for optimal charging speed. Using a single USB port cable not designed for fast charging may result in longer charging times (e.g., 6 hours).

Issue: LED lights are not working.

Solution: Check the ON/OFF switch on the back of the charging station. Ensure it is in the 'ON' position if you wish for the lights to be active. Note that the switch only controls the lights and not the charging function itself.

9. Specifications

10. Warranty and Support

The OIVO PS5 Controller Charger comes with a 3-year warranty. For technical support, warranty claims, or any inquiries, please contact OIVO customer service through the retailer where the product was purchased or visit the official OIVO website for contact information.