Introduction
Thank you for choosing the MFSTUDIO 7-Piece Patio Dining Set. This manual provides comprehensive instructions for the safe assembly, proper use, and effective maintenance of your new outdoor furniture. Designed for durability and comfort, this set includes a rectangular metal table with an umbrella hole and six padded sling chairs, perfect for enhancing your outdoor living space.
Image: The complete MFSTUDIO 7-Piece Patio Dining Set, featuring a rectangular table and six chairs, arranged on an outdoor patio.
Safety Information
- Read all instructions carefully before assembly and use.
- Keep all packaging materials away from children to prevent choking hazards.
- Ensure all bolts and screws are securely tightened before use. Periodically check and re-tighten as necessary.
- Do not stand or jump on the table or chairs.
- Distribute weight evenly on the table surface.
- Do not exceed the maximum weight capacity of 300 lbs per chair.
- Place the furniture on a flat, stable surface to prevent tipping.
- In strong winds, consider securing the furniture or storing it indoors to prevent damage or injury.
Package Contents
Your MFSTUDIO 7-Piece Patio Dining Set is shipped in 4 boxes. Please verify that all components are present before beginning assembly.
- 1 x Rectangular Metal Dining Table
- 6 x Padded Sling Chairs
- Assembly Hardware Kit (bolts, washers, nuts, Allen wrench)
- Instruction Manual
Setup and Assembly
Assembly is required for this dining set. It is recommended that two adults assemble the furniture. Lay out all parts on a soft, clean surface to prevent scratches.
Chair Assembly
- Attach the chair backrest to the seat frame using the provided bolts and washers. Do not fully tighten yet.
- Connect the chair legs to the seat frame. Ensure the legs are oriented correctly.
- Once all parts are loosely assembled, place the chair on a flat surface and gently apply pressure to ensure it sits level. Then, fully tighten all bolts with the Allen wrench.
- Repeat for all six chairs.
Image: Detail of the chair's ergonomic high back design, highlighting its 25.1-inch heightened backrest and curved support for comfort.
Image: Close-up view of the chair's seat, illustrating the luxurious padding and 3-layer thickened design for enhanced comfort.
Table Assembly
- Carefully unbox the table top and place it upside down on a protected surface.
- Attach the table legs to the designated mounting points on the underside of the table top using the provided hardware. Ensure all connections are aligned.
- Loosely secure all bolts. Once all legs are attached, carefully flip the table upright.
- Adjust the table to ensure it is level, then fully tighten all bolts.
Image: Detailed view of the rectangular metal dining table, showcasing its 100% steel frame, 1.57-inch umbrella hole, and elegant curved leg design.
Image: Overhead view of the 60" x 38" steel slat table top, highlighting its E-coating for rust and weather resistance, suitable for six people.
Operating and Usage
- Placement: Position your dining set on a level, stable outdoor surface such as a patio, deck, or garden area.
- Umbrella Hole: The table features a 1.57-inch diameter umbrella hole in the center. Insert a standard patio umbrella (not included) through this hole for shade. Ensure the umbrella base is stable and weighted appropriately.
- Seating: The chairs are designed for comfortable seating. Avoid rocking excessively or placing undue stress on the chair frames.
- Weight Capacity: Each chair has a maximum weight capacity of 300 lbs. Do not exceed this limit.
Maintenance
Proper care will extend the life and appearance of your MFSTUDIO Patio Dining Set.
- Cleaning: Wipe the table and chair frames with a dry cloth regularly to remove dust and debris. For deeper cleaning, use a mild soap and water solution with a soft cloth. Rinse thoroughly and dry completely to prevent water spots and rust.
- Fabric Care: The sling fabric is designed to be water-resistant and quick-drying. Clean with a mild soap and water solution. Avoid harsh chemicals or abrasive cleaners that could damage the fabric or coating.
- Rust Prevention: The metal components have a special waterproof coating. However, to further prevent rust, avoid prolonged exposure to standing water. If scratches occur, touch up with rust-inhibiting paint.
- Seasonal Storage: During off-seasons or periods of extreme weather, it is recommended to cover the furniture with a weather-resistant cover or store it indoors in a dry place to protect it from the elements.
- Hardware Check: Periodically inspect all bolts and screws to ensure they remain tight. Re-tighten as needed to maintain stability and safety.
Image: Close-up of the superior Textilene fabric, demonstrating its water-resistant properties with visible water droplets, and highlighting its UV-resistant, easy-to-clean, and quick-drying features.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Furniture wobbles after assembly. | Uneven tightening of bolts or uneven surface. | Loosen all bolts slightly, place furniture on a flat surface, apply gentle downward pressure, then re-tighten all bolts evenly. Ensure the furniture is on a level ground. |
| Difficulty aligning screw holes during assembly. | Parts are not correctly oriented or misaligned. | Review the assembly diagrams. Do not fully tighten any bolts until all parts are loosely connected. Adjust alignment as needed. |
| Rust spots appearing on metal frame. | Prolonged exposure to moisture or damaged coating. | Clean the affected area, dry thoroughly, and apply rust-inhibiting paint. Ensure furniture is dried after rain and covered during harsh weather. |
| Sling fabric appears stretched or loose. | Normal wear and tear or excessive weight. | Ensure weight capacity is not exceeded. While some stretching is normal over time, significant issues may require contacting customer support. |
Specifications
- Product Name: MFSTUDIO 7-Piece Patio Dining Set
- Model: 7 PCS Rectangular Table Fixed Chair
- Material: Heavy-duty Metal (Frame), Textilene (Sling Fabric)
- Table Dimensions: L61" x W35" x H29" (155 cm x 89 cm x 74 cm)
- Umbrella Hole Diameter: 1.57" (4 cm)
- Chair Dimensions:
- Seat Width: 19.6" (50 cm)
- Seat Depth: 18.8" (48 cm)
- Full Height: 42" (107 cm)
- Backrest Height: 25.1" (63.8 cm)
- Chair Weight Capacity: 300 LBS (136 kg)
- Color: Fixed Chair (Grey sling fabric with black metal frame)
- Manufacturer: MFSTUDIO
- ASIN: B08S2WB7MJ
- Care Instructions: Wipe with Dry Cloth (for general cleaning)
Image: Dimensional diagram illustrating the length, width, and height of the rectangular table, and the seat width, seat depth, and overall height of a single chair.
Warranty and Support
MFSTUDIO stands behind the quality of its products. This patio dining set comes with a 1-year outdoor guarantee on the steel slat table top, specifically for rust and weather resistance, as indicated by the manufacturer.
For any questions, missing parts, or concerns regarding your product, please contact MFSTUDIO customer support. Have your model number (7 PCS Rectangular Table Fixed Chair) and ASIN (B08S2WB7MJ) ready when contacting support for faster service.
You can visit the official MFSTUDIO store on Amazon for more information and contact options: MFSTUDIO Amazon Store
