1. Product Overview
The ONE Light 69002A/W is a set of six integrated LED lights designed for outdoor deck and stair illumination. Each light features a robust 316 stainless steel construction, ensuring durability and resistance to outdoor elements. These lights are rated IP67, providing protection against dust and temporary immersion in water. They operate on 230V and are equipped with non-dimmable LED drivers.
- Material: 316 Stainless Steel
- IP Rating: IP67 (Dust tight and protected against temporary immersion in water)
- Dimensions: 40 mm (Height)
- Light Source: Integrated LED (6 x 0.5W)
- Dimmability: Not dimmable
- Adjustability: Not adjustable
- Compliance: Conforms to EN60598-1 and other specific standards.
2. Safety Instructions
Please read these safety instructions carefully before installation and use. Failure to follow these instructions may result in electric shock, fire, or other hazards.
- Electrical Safety: Installation must be performed by a qualified electrician in accordance with all local and national electrical codes. Ensure the main power supply is switched off before commencing any installation or maintenance work.
- Voltage: This product operates on 230V. Verify your power supply matches this requirement.
- Outdoor Use: The lights are IP67 rated for outdoor use. Ensure all connections are properly sealed to maintain this rating.
- Non-Dimmable: Do not attempt to connect these lights to a dimmer switch. The integrated LED driver is not compatible with dimmers, and doing so may damage the product or create a fire hazard.
- Integrated LEDs: The LED lamps are integrated and cannot be changed in the luminaire. Do not attempt to replace them.
- Heat: While LED lights produce less heat than traditional bulbs, ensure adequate ventilation around the fixtures.
- Damage: Do not use the product if any part is damaged. Contact customer support for assistance.
3. Package Contents
Verify that all components are present and undamaged before proceeding with installation.
- 6 x ONE Light 69002A/W LED Deck/Stair Lights
- 6 x Independent Plugs
- 6 x 1-meter Cables (attached to lights)
- Instruction Manual (this document)
4. Setup and Installation
Installation should be carried out by a qualified professional. Ensure power is disconnected before installation.
- Plan Placement: Determine the desired locations for each of the six lights on your deck or stairs. Consider the cable length (1 meter per light) and the proximity to your main power supply.
- Prepare Mounting Holes: Based on the dimensions of the lights, drill appropriate holes for flush mounting. Refer to the dimension diagram below for precise measurements.
Image Description: This diagram illustrates the physical dimensions of a single ONE Light 69002A/W LED light. It shows a circular top view with a diameter of 35mm and a side profile view indicating a total height of 40mm. This information is crucial for preparing the correct size mounting holes.
- Wiring: Connect each light's 1-meter cable to the independent plug. Then, connect the plugs to your 230V main power supply circuit. Ensure all electrical connections are secure and waterproof, especially for outdoor applications, to maintain the IP67 rating.
- Secure Lights: Insert each light into its prepared mounting hole and secure it according to the fixture's design. Ensure a snug fit to prevent water ingress.
- Test: Once all lights are installed and secured, restore power and test the functionality of each light.
5. Operating Instructions
The ONE Light 69002A/W LED lights are designed for simple operation.
- Power On/Off: Control the lights using the main power switch connected to the circuit.
- Non-Dimmable: These lights are not dimmable. They will operate at their full brightness when powered on.
6. Maintenance
Regular maintenance ensures optimal performance and longevity of your LED lights.
- Cleaning: Periodically clean the surface of the lights with a soft, damp cloth. Do not use abrasive cleaners or solvents, as these can damage the stainless steel finish.
- Inspection: Regularly inspect the cables and connections for any signs of wear, damage, or corrosion. Address any issues promptly to maintain safety and IP rating.
- No User Serviceable Parts: The integrated LEDs cannot be replaced. If a light fails, the entire unit may need to be replaced.
7. Troubleshooting
If you encounter issues with your ONE Light 69002A/W LED lights, refer to the following common problems and solutions.
| Problem | Possible Cause | Solution |
|---|---|---|
| Lights do not turn on. |
|
|
| Lights flicker. |
|
|
| Lights are not as bright as expected. |
|
|
If troubleshooting steps do not resolve the issue, please contact ONE Light customer support.
8. Specifications
| Brand | ONE Light |
| Model Number | 69002A/W |
| Material | 316 Stainless Steel |
| Light Source Type | Integrated LED |
| Power Consumption | 6 x 0.5W (Total 3W) |
| Voltage | 230 V |
| IP Rating | IP67 |
| Dimensions (Height) | 40 mm |
| Dimmable | No |
| Adjustable | No |
| Compliance | EN60598-1 |
Image Description: This image displays the energy efficiency label for the ONE Light 69002A/W luminaire. The label states, "This luminaire contains built-in LED lamps. The lamps cannot be changed in the luminaire." It also includes a European energy rating scale, indicating the product's energy class for LED lights.
9. Warranty and Support
Specific warranty information is not provided in the product details. For warranty claims, technical support, or further assistance, please contact your retailer or the manufacturer, ONE Light, directly.
Manufacturer: ONE Light
Model: 69002A/W
