Sylvania LED Outdoor Bullet Floodlight Instruction Manual

1. Introduction

This manual provides essential information for the safe and effective installation, operation, and maintenance of your Sylvania LED Outdoor Bullet Floodlight. This floodlight is designed for various outdoor lighting applications, including landscape, wall wash, facade, sign, and general lighting. It features a lightweight, compact design and delivers 1250 lumens of 5000K daylight illumination using 15 watts of power.

2. Important Safety Information

WARNING: To reduce the risk of death, personal injury, or property damage from fire, electric shock, falling parts, cuts, abrasions, and other hazards, read all warnings and instructions included with and on the fixture box and all fixture labels.

• Installation must be performed by a qualified electrician in accordance with all applicable national and local electrical codes.
• Disconnect power at the fuse or circuit breaker before installation or servicing.
• Ensure the supply voltage is correct by comparing it with the luminaire label information.
• Do not handle energized fixtures, especially when hands are wet.
• Do not install near combustible materials.
• This product is rated for wet locations. Ensure all connections are properly sealed to prevent water intrusion.

3. Package Contents

The package includes:

• 1 Sylvania LED Outdoor Bullet Floodlight (Model 60182)

4. Product Specifications

Figure 4.1: Approximate dimensions of the Sylvania LED Outdoor Bullet Floodlight.

5. Installation

This floodlight is designed for surface mounting using its integrated knuckle. Professional installation is recommended.

5.1 Pre-Installation

• Turn off power: Ensure power to the installation area is disconnected at the circuit breaker or fuse box.
• Inspect: Check the floodlight for any damage before installation.
• Tools required: Basic electrical tools (wire strippers, screwdriver, electrical tape), mounting hardware (not included, specific to mounting surface).

5.2 Mounting the Fixture

1. Select a suitable mounting location that can support the weight of the fixture and provides the desired light coverage.
2. Securely attach the floodlight's mounting base to the desired surface using appropriate hardware (e.g., screws, anchors). The integrated knuckle allows for angle adjustment.

5.3 Wiring Connections

1. Route the electrical supply wires to the fixture's wiring compartment.
2. Connect the supply wires to the fixture wires according to local electrical codes (typically black to black, white to white, and ground to ground).
3. Ensure all wire connections are secure and properly insulated with wire nuts and electrical tape.
4. Carefully tuck all wires into the junction box or wiring compartment.

5.4 Aiming the Floodlight

1. Once mounted and wired, adjust the angle of the floodlight using the integrated knuckle to direct the light as needed.
2. Tighten the knuckle adjustment screw to secure the desired position.

Figure 5.1: Example of floodlight application on a residential facade.

Figure 5.2: Example of floodlight application for landscape accent lighting.

6. Operation

After successful installation and power restoration, the Sylvania LED Outdoor Bullet Floodlight will illuminate when power is supplied. The floodlight provides a consistent 5000K daylight color temperature.

6.1 Light Color Information

Figure 6.1: The floodlight emits 5000K Daylight, providing a bright, cool white light.

7. Maintenance

The Sylvania LED Outdoor Bullet Floodlight requires minimal maintenance.

• Cleaning: Periodically clean the exterior of the fixture with a soft, damp cloth to remove dirt and debris. Do not use abrasive cleaners or solvents.
• Inspection: Regularly inspect the fixture for any signs of damage, loose connections, or wear. Address any issues promptly.
• LEDs: The integrated LED light source is designed for long life and is not user-replaceable.

8. Troubleshooting

If your floodlight is not functioning as expected, refer to the following common issues and solutions:

If the problem persists after attempting these solutions, contact customer support.

9. Warranty Information

This Sylvania LED Outdoor Bullet Floodlight is covered by a 5-year limited warranty. This warranty covers defects in materials and workmanship under normal use. For full warranty terms and conditions, please refer to the documentation provided with your purchase or contact customer support.

Figure 9.1: 5-Year Limited Warranty.

10. Customer Support

For technical assistance, warranty claims, or additional information, please contact Sylvania customer support. Refer to the official Sylvania website or your product packaging for the most current contact details.

You may also find general information about LEDVANCE (the manufacturer of Sylvania products) and their commitment to lighting innovation in the video below: