1. Introduction
Thank you for choosing the Lepro Portable LED Work Light. This manual provides essential information for the safe operation, maintenance, and troubleshooting of your device. Please read this manual thoroughly before use and retain it for future reference.
Image 1.1: Lepro Portable LED Work Light and included USB charging cable.
2. Product Overview
2.1 Key Features
- Dual Functionality: Operates as both a focused flashlight and a broad work light.
- Multiple Lighting Modes: Offers 5 distinct modes: High, Medium, Low, Red Light, and Flashing Red SOS.
- Rechargeable Battery: Equipped with a built-in rechargeable lithium-ion polymer battery.
- Power Bank Function: Can be used to charge other USB-powered devices.
- Water Resistance: IP44 rated, providing protection against splashing water from any direction.
- Adjustable Stand: Features a 180° adjustable handle that doubles as a stand.
- Durable Construction: Designed with TPR soft rubber protection for fall resistance and auto cooling control to prevent overheating.
2.2 Package Contents
- 1 x Lepro Rechargeable LED Work Light
- 1 x USB Charge Cable (USB-A to Micro USB)
Image 2.1: Rear view of the work light, highlighting the charging ports and the included USB cable.
3. Setup
3.1 Initial Charging
- Before first use, fully charge the work light.
- Connect the included Micro USB cable to the charging port on the work light.
- Connect the other end of the USB cable to a 5V DC USB charger adapter (not included) or a computer USB port.
- The charging indicator lights will illuminate to show charging progress. All indicator lights will be solid blue when fully charged.
- Charging time is approximately 5.5 hours.
Important: Do not use adapters with voltage over 5V, as this may damage the device.
Image 3.1: The work light connected to a power source for charging and demonstrating its power bank functionality.
4. Operating Instructions
4.1 Power On/Off and Mode Selection
- To turn on the light, press the power button located on the back of the unit.
- Each subsequent press of the power button will cycle through the lighting modes:
- High (2000 lumens)
- Medium (1000 lumens)
- Low (400 lumens)
- Red Light (20 lumens)
- Flashing Red SOS
- To turn off the light, press the power button after cycling through all modes, or press and hold the power button for approximately 2 seconds in any mode.
Image 4.1: Visual representation of the five available lighting modes and their respective brightness levels.
4.2 Power Bank Function
The work light can serve as a power bank to charge other devices.
- Ensure the work light has sufficient charge.
- Connect your device's USB charging cable to the USB-A output port on the back of the work light.
- The work light will begin charging your device.
Note: Using the power bank function will deplete the work light's battery, reducing its illumination time.
4.3 Adjustable Stand
The integrated handle can be adjusted up to 180 degrees to position the light at various angles or to serve as a carrying handle.
Image 4.2: The adjustable handle mechanism and physical dimensions of the work light.
5. Maintenance
5.1 Cleaning
- Ensure the device is turned off and disconnected from any power source before cleaning.
- Wipe the exterior with a soft, damp cloth. Do not use abrasive cleaners or solvents.
- Avoid submerging the device in water, despite its water resistance rating.
5.2 Storage
- Store the work light in a cool, dry place away from direct sunlight and extreme temperatures.
- For prolonged storage, charge the battery every 3-6 months to maintain battery health.
6. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on. | Battery is depleted. | Charge the work light fully. |
| Light does not charge. | Charging cable is faulty or not properly connected. Charger adapter is not 5V or faulty. |
Ensure the USB cable is securely connected. Try a different 5V USB charger adapter or cable. |
| Short battery life. | Operating in High mode. Battery degradation over time. Using power bank function frequently. |
Use lower brightness modes for extended battery life. Ensure full charge before use. Minimize power bank usage if primary need is illumination. |
| Device connected to power bank does not charge. | Work light battery is low. Device's charging cable is faulty. |
Charge the work light. Try a different charging cable for your device. |
7. Specifications
| Feature | Detail |
|---|---|
| Model Number | PR330034 |
| Brightness | Up to 2000 lumens |
| Wattage | 20 Watts |
| Voltage | 5 Volts (DC) |
| Battery Type | 2 Lithium Polymer batteries (included) |
| Battery Life (approx.) | High: 4.5 hours, Medium: 6 hours, Low: 14 hours, Red: 9 hours |
| Charging Time (approx.) | 5.5 hours |
| Water Resistance Rating | IP44 |
| Product Dimensions (L x W x H) | 6.61 x 1.73 x 4.4 inches (16.8 x 4.4 x 11.2 cm) |
| Item Weight | 1.14 pounds (0.52 kg) |
| Material | Acrylonitrile Butadiene Styrene (ABS), Aluminum, Polycarbonate (PC) |
| Light Source Type | Light Emitting Diode (LED) |
Image 7.1: Approximate battery life for each lighting mode.
8. Safety Information
- Do not look directly into the LED light when it is on, as it can cause eye strain or damage.
- Keep the device away from extreme heat sources, open flames, and highly flammable materials.
- Do not attempt to disassemble, repair, or modify the device. This will void the warranty and may cause damage or injury.
- Keep out of reach of children.
- Dispose of the battery and device according to local regulations. Do not dispose of batteries in household waste or fire.
- Use only the provided USB cable or a certified equivalent for charging.
- Ensure the charging adapter is 5V DC. Higher voltage adapters can damage the battery and device.
9. Warranty and Support
Lepro products are designed for reliability and performance. For warranty information, technical support, or customer service inquiries, please contact Lepro directly through their official website or the retailer where the product was purchased.
Please have your model number (PR330034) and purchase date available when contacting support.
