1. Product Overview
The Auxbeam 8 Gang Switch Panel BA80 provides a streamlined solution for controlling up to eight different 12V/24V auxiliary lights or electrical devices in your vehicle. It simplifies wiring by integrating fuses, relays, and a temperature protection switch into a compact control box, enhancing safety and organization.
Figure 1: Auxbeam 8 Gang Switch Panel BA80 with all included components.
Key Features:
- 8-Gang Control: Manages up to 8 auxiliary devices.
- Automatic Dimmable System: Adjusts backlight brightness based on ambient light.
- Easy Installation: Plug & play wiring harness, no large holes required.
- Wide Application: Suitable for Trucks, Pickups, UTVs, RVs, Cars, and Boats.
- Safety Design: Includes fuse, relay, and temperature protection.
2. Setup and Installation
Before installation, ensure your vehicle's battery is disconnected. Carefully review all components and wiring diagrams.
2.1 Included Components:
- 1 x Switch Control Box
- 1 x Switch Panel
- 2 x Mounting Brackets (for switch panel)
- 1 x Strap
- 1 x Wiring Harness
- 1 x Voltage Protection Switch
- 1 x 60PCS DIY Stickers
- 1 x Upgraded Installation Instruction
2.2 Wiring Diagram and Specifications:
The control box features 8 circuits with varying amperage capacities. Ensure your accessories do not exceed these limits.
Figure 2: Detailed product information and wiring specifications for the BA80.
The total power capacity is 600W at 12V and 1200W at 24V, with a maximum current of 60A.
Figure 3: Example wiring connections for various accessories to the control box.
2.3 Mounting Options:
The switch panel can be installed using the provided mounting brackets or double-sided adhesive tape. The control box is typically mounted in the engine bay near the battery.
Figure 4: Two types of mounting brackets are included for flexible installation.
2.4 Installation Video:
Video 1: An overview of the Auxbeam 8 Gang Switch Panel, demonstrating its features and typical installation. This video is provided by the seller.
3. Operating Instructions
The Auxbeam 8 Gang Switch Panel is designed for intuitive control of your vehicle's accessories.
3.1 Basic Operation:
- Each button on the switch panel controls a specific circuit connected to the control box.
- Press a button to turn the connected accessory ON or OFF.
- The main ON/OFF button (red) controls the entire system.
3.2 Automatic Dimmable Function:
The switch panel features an automatic dimmable function. The backlight brightness of the buttons will adjust based on the ambient light conditions to improve visibility and reduce driver distraction.
Figure 5: The switch panel's backlight adjusts automatically for optimal visibility in various lighting conditions.
3.3 Customizing Buttons:
Use the included 60PCS DIY stickers to label your buttons according to the connected accessories for easy identification.
Figure 6: Apply the provided stickers to customize your switch panel buttons.
4. Maintenance
Regular maintenance ensures the longevity and optimal performance of your Auxbeam switch panel system.
- Keep the control box and switch panel clean and dry. Avoid exposing them to excessive moisture or dust.
- Periodically check all wiring connections to ensure they are secure and free from corrosion.
- Inspect fuses regularly. The control box has a system failure indicator for blown fuses.
5. Troubleshooting
If you encounter issues with your Auxbeam 8 Gang Switch Panel, refer to the following common troubleshooting steps:
| Problem | Possible Cause | Solution |
|---|---|---|
| System not powering on. | Loose battery connection, main fuse blown, or ACC wire issue. | Check battery terminals, inspect the main 60A circuit breaker, and verify ACC wire connection. |
| Individual accessory not working. | Blown circuit fuse, loose connection to accessory, or faulty accessory. | Check the corresponding fuse in the control box (indicated by a red LED if blown). Ensure accessory wiring is secure. Test the accessory directly if possible. |
| Switch panel backlight not dimming automatically. | Light sensor obstructed or faulty. | Ensure the light sensor on the switch panel is not covered. If the issue persists, contact support. |
If troubleshooting steps do not resolve the issue, please contact Auxbeam customer support.
6. Specifications
Figure 7: The complete kit with all components and their layout.
| Specification | Value |
|---|---|
| Operation Mode | ON-OFF-ON |
| Current Rating | 60 Amps (Max) |
| Operating Voltage | 12V / 24V |
| Max Power (12V) | 600W |
| Max Power (24V) | 1200W |
| Operating Temperature | -40°F ~ 221°F (-40°C ~ 105°C) |
| International Protection Rating | IP65 (Waterproof) |
| Switch Panel Dimensions | 4.6 x 0.54 x 2.6 inches |
| Control Box Dimensions | 6.3 x 4.1 inches |
| Material | Aluminum (Switch Panel) |
7. Warranty and Support
The Auxbeam 8 Gang Switch Panel BA80 comes with a 2-year protection provided by Auxbeam.
For any problems, questions, or technical assistance, please feel free to contact Auxbeam customer service. We are committed to providing perfect after-sales service.
Visit the official Auxbeam store for more information and support resources: Auxbeam Store