Introduction
This manual provides essential information for the setup, operation, maintenance, and troubleshooting of your Dell Precision 5820 MT Tower Workstation. The Dell Precision 5820 MT Tower is a high-performance workstation designed for demanding professional applications, featuring an Intel Core i9-10900X processor, 16GB DDR4 RAM, a 256GB SSD, and an AMD Radeon Pro WX3200 graphics card, running Windows 10 Pro.
Figure 1: Front view of the Dell Precision 5820 MT Tower Workstation.
Components Overview
Familiarize yourself with the external components and ports of your workstation.
Figure 2: Front and rear view with numbered components and ports.
Front Panel Components:
- Power Button
- Optical Drive (8X DVD+/-RW Slimline)
- USB 3.0 Ports
- USB 2.0 Ports
- Headphone Jack
- Microphone Jack
- SD Card Reader (if equipped)
- Front Air Vent
Rear Panel Components:
- Power Connector
- Power Supply Unit (PSU)
- USB 3.0 Ports
- USB 2.0 Ports
- Ethernet Port (RJ-45)
- Audio Line-out Port
- Audio Line-in Port
- DisplayPort / HDMI (depending on graphics card)
- Expansion Card Slots
Setup Instructions
Follow these steps to set up your Dell Precision 5820 MT Tower Workstation.
- Unpack the Workstation: Carefully remove the workstation and all accessories from the packaging. Ensure all components listed in the packing slip are present.
- Position the Workstation: Place the tower on a stable, flat surface with adequate ventilation. Avoid blocking air vents.
- Connect Peripherals:
- Connect the Dell KB216 Wired Keyboard to an available USB port.
- Connect the Dell MS116 Wired Mouse to an available USB port.
- Connect your monitor(s) to the appropriate display ports on the AMD Radeon Pro WX3200 graphics card (e.g., mDP ports). Use adapters if necessary.
- Connect any other peripherals such as external drives, printers, or network cables.
- Connect Power: Plug the power cable into the power connector on the rear of the workstation, then plug the other end into a grounded electrical outlet or surge protector.
- Initial Power On: Press the power button on the front panel. The system will boot up, and Windows 10 Pro will begin its initial setup process. Follow the on-screen instructions to complete the operating system configuration.
Operating Instructions
This section covers basic operation of your Dell Precision 5820 MT Tower.
Powering On and Off:
- To Power On: Press the power button on the front of the tower.
- To Shut Down: In Windows 10 Pro, click the Start button, then Power, and select Shut down. This ensures all applications are closed properly and data is saved.
- To Restart: In Windows 10 Pro, click the Start button, then Power, and select Restart.
- To Sleep: In Windows 10 Pro, click the Start button, then Power, and select Sleep.
Using the Optical Drive:
The 8X DVD+/-RW Slimline drive allows you to read and write CDs and DVDs.
- To Open: Press the eject button on the optical drive bezel.
- To Insert: Place a disc onto the tray with the label side up and gently push the tray back into the drive until it clicks.
Connecting to a Network:
- Wired Connection: Connect an Ethernet cable from your router or network switch to the Ethernet port on the rear of the workstation.
- Wireless Connection: The workstation includes an Intel Dual Band Wireless AC 8265 (802.11ac) module. In Windows 10 Pro, click the network icon in the taskbar, select your Wi-Fi network, and enter the password if prompted.
Maintenance
Regular maintenance helps ensure the longevity and optimal performance of your workstation.
- Keep Vents Clear: Ensure that the air vents on the front, rear, and sides of the tower are not obstructed to allow for proper airflow and prevent overheating.
- Clean Regularly: Use a soft, dry cloth to clean the exterior of the tower. For dust accumulation in vents, use compressed air. Always power off and unplug the workstation before cleaning.
- Software Updates: Regularly check for and install updates for Windows 10 Pro, device drivers (especially graphics drivers), and Dell system utilities to maintain security and performance.
- Data Backup: Periodically back up important data to an external drive or cloud storage to prevent data loss.
Figure 3: Exploded view showing internal components for maintenance and upgrades.
Troubleshooting
This section provides solutions to common issues you might encounter.
| Problem | Possible Cause | Solution |
|---|---|---|
| Workstation does not power on. | No power, loose connections. |
|
| No display on monitor. | Incorrect cable connection, monitor off, incorrect input. |
|
| System is slow or unresponsive. | Too many applications, low disk space, outdated drivers. |
|
| Peripheral (keyboard/mouse) not working. | Loose connection, driver issue. |
|
Specifications
Detailed technical specifications for the Dell Precision 5820 MT Tower Workstation.
| Processor | Intel Core i9-10900X (3.7GHz, 4.7GHz Turbo, 10 Cores, 19.25MB Cache, HT, 165W) |
| Memory | 16GB (2x8GB) DDR4 2666MHz UDIMM Non-ECC Memory |
| Storage | 2.5" 256GB SATA Class 20 Solid State Drive (SSD) |
| Graphics Card | AMD Radeon Pro WX 3200, 4GB GDDR5, 4 mDP (FWS) |
| Operating System | Windows 10 Pro, 64-bit, English |
| Wireless Connectivity | Intel Dual Band Wireless AC 8265 (802.11ac) 2x2 + Bluetooth module |
| Optical Drive | 8X DVD+/-RW Slimline |
| Keyboard | Dell KB216 Wired Keyboard English Black |
| Mouse | Dell MS116 Wired Mouse Black |
| Power Supply | 950W Chassis CL |
| Dimensions (Approx.) | 27 x 23.6 x 12 inches (Package Dimensions) |
| Weight (Approx.) | 42.4 pounds |
Warranty and Support
Your Dell Precision 5820 MT Tower Workstation comes with a 3-Year Hardware Warranty with Onsite/In-Home Service after Remote Diagnosis. For technical assistance, warranty claims, or further support, please refer to the official Dell support website or contact Dell customer service.
For the most up-to-date support information, drivers, and documentation, visit www.dell.com/support.
