YIHUA 8786D-I and 928D-III Soldering & Rework Station User Manual

1. Introduction

This manual provides detailed instructions for the safe and effective use of your YIHUA 8786D-I Micro-Soldering & Rework Station and the YIHUA 928D-III High Power Soldering Iron. This bundle is designed for a wide range of soldering, desoldering, and hot air rework applications. Please read this manual thoroughly before operating the equipment.

Image 1.1: The YIHUA 8786D-I Rework Station and YIHUA 928D-III Soldering Iron bundle.

2. Safety Instructions

Always observe the following safety precautions to prevent injury or damage to the equipment:

• Ventilation: Use the equipment in a well-ventilated area to avoid inhaling fumes from soldering.
• Heat Hazard: The soldering iron tip and hot air nozzle reach high temperatures. Avoid direct contact with skin or flammable materials.
• Power Supply: Ensure the equipment is connected to a 110-127V AC power supply. Do not use with 220V mains electricity.
• Grounding: Ensure the equipment is properly grounded.
• Children and Pets: Keep the equipment out of reach of children and pets.
• Storage: Allow the equipment to cool completely before storing.
• Maintenance: Disconnect power before performing any maintenance or changing accessories.

3. Package Contents

Verify that all items listed below are included in your package:

• YIHUA 8786D-I Micro-Soldering & Rework Station
• YIHUA 928D-III 110W High Power Soldering Iron
• Soldering Iron Holder with cleaning sponge and brass wool
• 1 x 35g 0.8mm LEAD-FREE solder wire
• 10 x assorted soldering iron tips (for 8786D-I soldering iron)
• 3 x high-quality soldering iron tips (for 928D-III soldering iron)
• 4 x assorted hot air nozzles
• 1 x solder sucker
• 1 x IC extractor
• Rosin Flux

Image 3.1: Overview of all items included in the YIHUA 8786D-I and 928D-III bundle.

4. Product Overview

4.1 YIHUA 8786D-I Micro-Soldering & Rework Station

The 8786D-I is a 2-in-1 station featuring both a hot air rework station and a soldering station. It offers precise temperature control and stabilization for both functions.

Image 4.1: The YIHUA 8786D-I station with its two core functions: Hot Air Rework and Soldering.

4.2 YIHUA 928D-III High Power Soldering Iron

The 928D-III is a powerful 110W soldering iron designed for general and heavy-duty applications. It features a digital display and built-in PID temperature stabilization.

Image 4.2: The YIHUA 928D-III High Power Soldering Iron, stand, and included tips.

5. Setup and Installation

Follow these steps to set up your YIHUA 8786D-I station:

1. Connect Hot Air Gun: Insert the hot air gun connector into the designated port on the 8786D-I station. Push it in completely and fasten the locking ring.
2. Connect Soldering Iron: Insert the soldering iron connector into its designated port on the 8786D-I station. Push it in completely and fasten the locking ring.
3. Place Holders: Position the hot air gun holder and soldering iron stand securely on your workbench.
4. Power Connection: Connect the main power cord to the 8786D-I station and then to a 110-127V AC power outlet.

For the YIHUA 928D-III Soldering Iron, simply connect its power cord to a 110-127V AC power outlet.

Image 5.1: Visual guide for correctly installing the hot air gun and soldering iron to the 8786D-I station.

6. Operating the YIHUA 8786D-I Station

6.1 Control Panel Overview

Image 6.1: The control panel of the YIHUA 8786D-I station, showing digital displays and control buttons.

6.2 Hot Air Rework Function

1. Power On: Flip the 'SMD REWORK' power switch to ON.
2. Set Temperature: Use the 'UP' and 'DOWN' buttons to adjust the hot air temperature (range: 212-896°F / 100-480°C).
3. Adjust Airflow: Use the 'AIR' knob to control the airflow intensity.
4. Operation: Direct the hot air nozzle towards the component to be reworked.
5. Cooling Mode: When the hot air gun is placed in its holder, the station automatically enters cooling mode to prolong the heating element's life. The display will show 'COOL' or 'HOT' depending on the temperature.

6.3 Soldering Station Function

1. Power On: Flip the 'SOLDERING' power switch to ON.
2. Set Temperature: Use the 'UP' and 'DOWN' buttons to adjust the soldering iron temperature (range: 392-896°F / 200-480°C).
3. Temperature Stabilization: The station features temperature stabilization to maintain the set temperature consistently.
4. Sleep Mode: The soldering iron may enter sleep mode after a period of inactivity (e.g., 10 minutes), indicated by a specific display.

7. Operating the YIHUA 928D-III Soldering Iron

The 928D-III is a standalone soldering iron, ideal as a secondary or backup tool.

Image 7.1: Features of the YIHUA 928D-III Soldering Iron, including digital display and temperature adjustment buttons.

1. Power On: Plug the iron into a 110-127V AC outlet. Use the independent power switch on the handle to turn it on.
2. Set Temperature: Use the digital temperature adjustment buttons on the handle to set the desired temperature (range: 194-896°F / 90-480°C). The real-time temperature will be shown on the digital display.
3. Operation: Allow the iron to reach the set temperature before use.
4. Tip Installation: The iron features an interchangeable tip installation sleeve for easy tip changes. Ensure the iron is cool before changing tips.

8. Maintenance

8.1 Soldering Iron Tip Care

• Cleaning: Regularly clean the soldering iron tip using the included brass wool or a damp sponge. This removes oxidation and old solder, ensuring efficient heat transfer.
• Tinning: After cleaning and before storage, always tin the tip with a small amount of fresh solder. This protects the tip from oxidation.
• Replacement: Replace tips when they become excessively pitted or corroded, as this affects performance.

8.2 General Cleaning

• Ensure the unit is powered off and cooled down before cleaning.
• Wipe the station and tools with a soft, damp cloth. Do not use abrasive cleaners or solvents.
• Keep the air vents on the hot air gun and station clear of dust and debris.

9. Troubleshooting

If you encounter issues, refer to the following common problems and solutions:

• No Power: Check the power cord connection and ensure the power switches on the station and iron are in the 'ON' position. Verify the power outlet is functional.
• Iron/Hot Air Not Heating: Ensure the connectors are fully inserted and fastened. Check the set temperature on the display. If the issue persists, the heating element may require inspection.
• Poor Soldering Performance: Clean and re-tin the soldering iron tip. Ensure the tip is appropriate for the task and the temperature setting is correct.
• Hot Air Gun Not Blowing: Check the airflow knob setting. Ensure the hot air gun is not obstructed.
• Error Codes: If the display shows an error code, consult the YIHUA support for specific guidance.

For persistent issues, contact YIHUA customer support.

10. Specifications

11. Warranty and Support

YIHUA provides a 12-month US-exclusive manufacturer technical coverage for this product. For any technical assistance or support, please contact YIHUA customer service through Amazon's platform. Our team is available 24/7 to provide professional assistance.