Introduction
Welcome to your new Igloo Profile II 60 Roller Cooler. This cooler is designed for convenient transport and superior cooling performance, making it ideal for various outdoor activities, tailgating, camping, or simply keeping your beverages and food chilled on the go. Its robust construction and thoughtful features ensure your items stay cold and are easily accessible.
Key Features
- Wheeled Design: Equipped with durable wheels for effortless transport, allowing you to push or pull the cooler with ease.
- Telescoping Handle: Features a locking, telescoping handle with integrated gear hangers, perfect for carrying additional bags or totes.
- Cool Riser Technology: An elevated design that improves cooling performance by keeping the cooler away from hot surfaces.
- Triple-Snap Drain Plug: A leak-resistant drain plug for quick and easy draining of melted ice.
- Molded-in Side Handles: Ergonomically designed side handles for comfortable lifting and loading/unloading.
Setup
Initial Cleaning
Before first use, and after each subsequent use, clean the cooler thoroughly. Use mild soap and water to wipe down the interior and exterior surfaces. Rinse thoroughly and allow to air dry completely before closing the lid or storing.
Preparing for Use
- Ensure the drain plug is securely closed to prevent leaks.
- For optimal cooling, pre-chill the cooler by adding a bag of ice or ice packs several hours before loading.
- Load contents, placing ice or ice packs strategically to maximize contact with items.
- Close the lid firmly to create a tight seal.
Operating Your Cooler
Transporting the Cooler
The Igloo Profile II 60 Roller Cooler is designed for easy mobility. To extend the telescoping handle, press the release button located on the handle grip and pull upwards until it locks into place. You can then push or pull the cooler. The integrated gear hangers on the handle allow you to hang lightweight bags or accessories for added convenience.
Image: The Igloo Profile II 60 Roller Cooler shown with its telescoping handle fully extended for easy transport.
Accessing Contents
The hinged lid provides easy access to the cooler's contents. Lift the lid from the front to open. The lid is designed to stay open for convenient loading and unloading.
Image: The cooler with its lid open, revealing the spacious interior.
Draining Melted Ice
To drain melted ice, locate the triple-snap leak-resistant drain plug at the bottom of the cooler. Twist the plug counter-clockwise to open and allow water to drain. Once drained, securely close the plug by twisting clockwise.
Image: Rear view of the cooler, highlighting the drain plug and durable wheels.
Maintenance
Cleaning
Regular cleaning is essential to maintain your cooler's performance and hygiene. After each use, especially when storing food or beverages, clean the interior and exterior with a mild detergent and warm water. For stubborn stains, a baking soda paste can be used. Avoid abrasive cleaners or harsh chemicals that could damage the plastic.
Storage
When not in use, store the cooler in a cool, dry place. It is recommended to leave the lid slightly ajar to allow for air circulation and prevent odors or mildew buildup. Ensure the cooler is completely dry before storing for extended periods.
Troubleshooting
Common Issues and Solutions
| Problem | Possible Cause | Solution |
|---|---|---|
| Ice melts too quickly. | Cooler not pre-chilled; lid not sealed properly; insufficient ice. | Pre-chill cooler before use. Ensure lid is firmly closed. Use adequate amount of ice or ice packs. Utilize Cool Riser Technology by placing on an elevated surface. |
| Handle is difficult to extend/retract. | Dirt or debris in the mechanism; mechanism needs lubrication. | Clean the handle mechanism thoroughly. Apply a silicone-based lubricant if necessary. |
| Unpleasant odor inside cooler. | Improper cleaning or storage. | Clean thoroughly with mild soap and water, or a baking soda paste. Leave lid ajar during storage to air out. |
Specifications
| Feature | Detail |
|---|---|
| Brand | Igloo |
| Model Name | Profile II 60 Roller |
| Model Number | 97000035009 |
| Capacity | 60 Quarts (56.78 Liters) |
| Material | Plastic, Polyethylene |
| Item Weight | 10.5 Pounds |
| Dimensions (LxWxH) | 19.77 x 18.63 x 20.28 inches |
| Special Feature | Insulated, Wheeled, Drain Plug |
Warranty and Support
Manufacturer's Warranty
This Igloo Profile II 60 Roller Cooler comes with a 1 Year Manufacturer's Warranty. This warranty covers defects in materials and workmanship under normal use. Please retain your proof of purchase for warranty claims.
Customer Support
For any questions, concerns, or warranty inquiries, please contact Igloo Customer Service. Visit the official Igloo website for contact information and further support resources.
Official Igloo Website: www.igloocoolers.com
