1. Safety Information
Please read all instructions carefully before using the Belmint Foot Massager Machine. Retain this manual for future reference.
Important Safeguards:
- Always unplug the massager from the electrical outlet immediately after use and before cleaning.
- Do not use while bathing or in a shower.
- Do not place or store the unit where it can fall or be pulled into a tub or sink.
- Do not place in or drop into water or other liquid.
- Never use pins or other metallic fasteners with this appliance.
- Close supervision is necessary when this appliance is used by, on, or near children, invalids, or disabled persons.
- Use this appliance only for its intended use as described in this manual. Do not use attachments not recommended by the manufacturer.
- Never operate this appliance if it has a damaged cord or plug, if it is not working properly, if it has been dropped or damaged, or dropped into water.
- Keep the cord away from heated surfaces.
- Never use while sleeping or drowsy.
- Never drop or insert any object into any opening.
- Do not operate where aerosol (spray) products are being used or where oxygen is being administered.
- Do not use on or near eyes or other highly sensitive areas.
- To disconnect, turn all controls to the “OFF” position, then remove plug from outlet.
- This appliance is designed for household use only.
- Individuals with certain medical conditions should consult a doctor before use, especially if experiencing neuropathy, poor circulation, or plantar fasciitis.
- The optional heat function should be used with caution by individuals sensitive to heat.
2. What's Included
Your Belmint Foot Massager Machine package includes the following components:
- 1 x Belmint Foot Massager Machine
- 1 x Remote Control
- 1 x AC Power Adapter
- 1 x Quick Start Guide
Image: Components included in the Belmint Foot Massager package.
3. Setup
Follow these steps to set up your foot massager:
- Unpack: Carefully remove all components from the packaging.
- Placement: Place the foot massager on a flat, stable surface near a power outlet. Ensure there is enough space around the unit for comfortable use.
- Power Connection: Connect the AC Power Adapter to the massager's power input port, then plug the adapter into a standard electrical outlet.
- Initial Check: Ensure the removable mesh foot liners are properly inserted and zipped into place before first use.
Image: The Belmint Foot Massager Machine ready for use.
4. Operating Instructions
The Belmint Foot Massager Machine offers various settings for a personalized massage experience. It is recommended to wear socks during use.
Getting Started:
- Power On: Press the ON/OFF button on the control panel or the remote control to turn on the unit. The display will show the default timer setting (e.g., 15 minutes).
- Positioning Feet: Gently place your feet into the foot inserts. The open-back design allows for adjustment to target specific areas of your feet, accommodating foot sizes up to men's size 10 comfortably. For larger feet (up to men's size 12), the heel may extend slightly outside the unit.
Image: Proper foot placement and size considerations for the massager.
Using the Remote Control:
The remote control provides convenient access to all functions without needing to bend down.
Image: Remote control and main panel for easy operation.
- ON/OFF: Powers the unit on or off.
- HEAT: Activates or deactivates the optional heat function. The heat can reach up to 115°F (46°C) to aid blood circulation.
- PRESSURE (+/-): Adjusts the massage intensity. There are 5 pressure levels, ranging from moderate to powerful.
- MODES: Cycles through 3 different massage modes.
- TIMER: Adjusts the auto-shutoff timer. The default is 15 minutes. Press once for 20 minutes, twice for 25 minutes, and three times for 30 minutes.
Massage Modes:
The massager offers three distinct modes to cater to different preferences:
- Mode 1: Shiatsu rolling + air compression.
- Mode 2: Another form of Shiatsu rolling + air compression.
- Mode 3: Air compression only (no Shiatsu rolling).
Image: Explanation of the three available massage modes.
Pressure Levels:
Choose from 5 pressure levels to customize the intensity of your massage, from gentle to deep-kneading.
Image: Visual representation of the 5 intensity levels and key features.
Foot Size and Massage Spot:
The open back design allows users to adjust their feet to target specific massage spots. The massage is generally felt strongest at the balls of the feet, with slightly less intensity at the arch and heels.
Image: How massage intensity is distributed based on foot size and position.
5. Maintenance
Cleaning:
- Always unplug the appliance from the power outlet before cleaning.
- The removable and washable mesh foot liners can be unzipped and removed for cleaning. Hand wash with mild soap and water, then air dry completely before reinserting.
- Wipe the exterior of the unit with a soft, damp cloth. Do not use abrasive cleaners or solvents.
- Do not immerse the unit in water or any other liquid.
Storage:
- Store the massager in a cool, dry place.
- Avoid contact with sharp edges or pointed objects that might cut or puncture the surface.
- To avoid breakage, do not wrap the power cord around the appliance.
6. Troubleshooting
If you encounter any issues with your Belmint Foot Massager, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Unit does not turn on. | Power cord not properly connected. | Ensure the power adapter is securely plugged into both the massager and a working electrical outlet. |
| No heat or insufficient heat. | Heat function not activated or needs time to warm up. | Press the HEAT button on the control panel or remote. Allow a few minutes for the heat to become noticeable. |
| Massage is too weak or too strong. | Pressure level needs adjustment. | Use the PRESSURE +/- buttons on the remote or control panel to adjust the intensity to your preference (5 levels available). |
| Massage mode is not desired. | Incorrect massage mode selected. | Press the MODES button on the remote or control panel to cycle through the 3 available massage programs until you find your preferred setting. |
| Unit stops unexpectedly. | Auto-shutoff timer activated. | This is normal operation. The unit has an auto-shutoff feature (15, 20, 25, or 30 minutes). Simply restart the unit if you wish to continue. |
If the problem persists after trying these solutions, please contact Belmint customer support.
7. Specifications
| Feature | Detail |
|---|---|
| Product Dimensions | 16 x 9 x 15 inches |
| Item Weight | 9 pounds |
| Model Number | BEL-FM1-BK |
| Power Source | Corded Electric |
| Material | Rubber |
| Manufacturer | Belmint |
| First Available Date | January 1, 2021 |
8. Warranty and Support
For information regarding warranty coverage, product support, or to purchase replacement parts, please refer to the warranty card included with your product or visit the official Belmint website. Contact information for customer service can typically be found on the product packaging or the manufacturer's website.
Manufacturer: Belmint
For further assistance, please contact Belmint customer support directly.
