1. Product Overview
The AXA Juno Steady is a high-quality LED rear bicycle light designed to enhance your visibility and safety on the road. Featuring a robust construction and an integrated parking light function, it ensures you remain visible even when stationary.
Figure 1.1: Front view of the AXA Juno Steady Rear Bicycle Light, highlighting its red reflector and central clear lens.
Key Features:
- Integrated LED rear light with parking light function.
- Durable construction with black finish.
- Designed for 6V-12V power systems.
- Waterproof design (IPX7 rated) for all-weather reliability.
- Frame mount installation.
2. Safety Information
Please read and understand all safety instructions before installing and using the AXA Juno Steady rear bicycle light. Failure to follow these instructions may result in injury or damage to the product.
- Ensure the light is securely mounted and visible from the rear.
- Do not look directly into the light source when it is active, as it may cause temporary vision impairment.
- Keep the light clean and free from obstructions to maintain optimal visibility.
- This product is designed for bicycle use only.
- If the light is damaged, do not use it. Contact AXA support for assistance.
3. Setup and Installation
The AXA Juno Steady rear light is designed for frame mounting. Ensure your bicycle has appropriate mounting points for a rear light.
Package Contents:
- AXA Juno Steady Rear Light (1)
- Mounting hardware (if included by manufacturer, typically bolts/nuts for frame mount)
Installation Steps:
- Identify Mounting Location: Locate the designated mounting points on the rear frame or fender of your bicycle. The light is designed for rear positioning.
- Secure the Light: Align the light with the mounting holes. Use the provided mounting hardware (screws, washers, nuts) to securely attach the light to the frame. Ensure it is firmly fastened and does not wobble.
- Connect Power: The light operates on a 6V-12V power source, typically from a dynamo or e-bike battery system. Connect the light's wires to the appropriate power output terminals on your bicycle's electrical system. Refer to your bicycle's manual for specific wiring diagrams if unsure. Ensure correct polarity.
- Test Functionality: Once installed and connected, activate your bicycle's power system (e.g., spin the wheel if using a dynamo, or turn on the e-bike system) to verify the light illuminates correctly.
Figure 3.1: Angled view of the AXA Juno Steady Rear Bicycle Light, illustrating its compact design and potential mounting areas.
4. Operating Instructions
The AXA Juno Steady rear light is designed for simple operation, typically controlled by your bicycle's main lighting system.
- Activation: The light will activate automatically when power is supplied from your bicycle's dynamo or e-bike system. This usually occurs when you start riding or turn on your e-bike's lights.
- Parking Light Function: The integrated "Steady" or parking light function ensures the light remains illuminated for a short period after you stop riding (e.g., at a traffic light). This feature is powered by a small capacitor within the light, providing continued visibility even when the bicycle is stationary. The duration of the parking light may vary based on prior riding time and charge.
- Brightness Settings: This model typically operates with a single brightness setting for the main light, optimized for rear visibility.
5. Maintenance
Regular maintenance ensures the longevity and optimal performance of your AXA Juno Steady rear light.
- Cleaning: Periodically wipe the light's lens and housing with a soft, damp cloth to remove dirt and grime. Avoid abrasive cleaners or solvents.
- Connection Check: Regularly inspect the electrical connections to ensure they are secure and free from corrosion.
- Mounting Security: Check that the light remains firmly mounted to your bicycle frame. Tighten any loose screws as needed.
- Damage Inspection: Inspect the light for any signs of physical damage, cracks, or exposed wiring. If damage is found, discontinue use and seek professional advice.
6. Troubleshooting
If you encounter issues with your AXA Juno Steady rear light, refer to the following common troubleshooting steps:
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on. |
|
|
| Parking light does not work or is very dim. |
|
|
| Light flickers or is intermittent. |
|
|
7. Specifications
| Attribute | Value |
|---|---|
| Brand | AXA |
| Model Name | Juno Steady |
| Part Number | 93929095SC |
| Color | Black |
| Material | Other |
| Power Source | 6V-12V (Dynamo/E-bike Compatible) |
| Water Resistance Level | Waterproof (IPX7) |
| Item Weight | 0.06 Kilograms |
| Mounting Type | Frame Mount |
| Number of settings | 2 (Main light, Parking light) |
| Brightness | 500 lumen |
| Auto Part Position | Rear |
| Item Package Dimensions L x W x H | 5.24 x 5 x 1.3 inches |
| First Available Date | December 29, 2020 |
8. Warranty and Support
AXA products are manufactured to high-quality standards. For specific warranty information, please refer to the warranty card included with your purchase or visit the official AXA website. Keep your proof of purchase for warranty claims.
For technical support, troubleshooting beyond this manual, or spare parts, please contact AXA customer service or the retailer from whom you purchased the product.
AXA Official Website: www.axa-bike.com
Note: Product specifications and features are subject to change without prior notice.
