SIFENE Cold Press Juicer Machine (Model AMR516) Instruction Manual

1. Introduction

Thank you for choosing the SIFENE Cold Press Juicer Machine, Model AMR516. This appliance is designed to extract juice from a variety of fruits and vegetables, preserving nutrients through its slow masticating technology. Please read this manual thoroughly before use to ensure safe and efficient operation.

2. Important Safety Instructions

When using electrical appliances, basic safety precautions should always be followed to reduce the risk of fire, electric shock, and/or injury to persons, including the following:

• Read all instructions before operating the juicer.
• Do not immerse the motor base in water or other liquids.
• Keep hands and utensils out of the feed chute during operation to prevent injury.
• Always ensure the juicer is properly assembled and the safety locking arm is engaged before turning it on.
• Unplug from outlet when not in use, before putting on or taking off parts, and before cleaning.
• Do not operate any appliance with a damaged cord or plug, or after the appliance malfunctions or has been damaged in any manner.
• This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
• Children should be supervised to ensure that they do not play with the appliance.

3. Product Components

Familiarize yourself with the parts of your SIFENE Cold Press Juicer Machine:

• Motor Base: The main unit containing the motor and control dial.
• Pulp Collector: Collects the fibrous residue from juicing.
• Juice Container: Collects the extracted juice.
• Feeding Chute (4.3-inch wide mouth): Allows for whole or large pieces of fruits and vegetables.
• Strainer/Filter: Separates juice from pulp. Made of 304 stainless steel.
• Pusher: Used to guide ingredients down the feeding chute.
• Safety Locking Arm: Secures the juicer components during operation.
• Cleaning Brush: Specialized brush for easy cleaning.

Image: SIFENE Cold Press Juicer Machine with a selection of fruits and vegetables.

4. Setup and Assembly

Follow these steps to assemble your juicer before first use:

1. Place the motor base on a stable, flat surface.
2. Snap the mid-ring onto the motor base, ensuring it is properly installed.
3. Attach the strainer to the mid-ring and motor. Ensure it sits securely.
4. Install the pulp collector onto the side of the motor base.
5. Place the cover over the body, aligning it correctly.
6. Insert the pusher rod fully into the feeding chute. The juicer will not function if the rod is not fully inserted.
7. Engage the safety locking arm to secure all components.
8. Position the juice cup under the juice outlet.

5. Operating Instructions

Prepare your fruits and vegetables and begin juicing:

1. Preparation: Wash all fruits and vegetables thoroughly. For the 4.3-inch wide mouth chute, most whole fruits and vegetables can be inserted without pre-cutting. However, remove large seeds, pits, or hard skins (e.g., pineapple skin) to prevent damage to the juicer.
2. Power On: Plug the juicer into a power outlet. Turn the control dial to the desired speed setting.
• Speed 1 (Low): Ideal for soft fruits and vegetables such as strawberries, tomatoes, grapes, and leafy greens.
• Speed 2 (High): Suitable for harder fruits and vegetables like carrots, apples, ginger, and celery.
3. Juicing: Gradually feed the prepared ingredients into the wide feeding chute. Use the pusher to gently guide them down. Do not force ingredients.
4. Continuous Operation: The juicer is designed for intermittent use. Do not operate for more than 1 minute continuously. Allow the motor to rest for 2 minutes between cycles to prevent overheating.
5. Anti-Clog Reverse Function: If the juicer becomes clogged, switch the dial to the 'R' (Reverse) setting for a few seconds to clear the blockage, then resume normal operation.

Image: The 4.3-inch wide mouth feeding chute of the SIFENE juicer, demonstrating its capacity for whole fruits and vegetables like apples, grapes, and carrots.

6. Cleaning and Maintenance

Regular cleaning ensures the longevity and hygiene of your juicer:

1. Disassembly: Turn off and unplug the juicer. Disengage the safety locking arm and carefully remove all detachable parts (pusher, cover, strainer, mid-ring, juice cup, pulp collector).
2. Washing: All detachable parts are BPA-free and dishwasher safe. For manual cleaning, rinse parts under running water. Use the provided specialized cleaning brush to remove pulp from the strainer and other components.
3. Motor Base: Wipe the motor base with a damp cloth. Never immerse the motor base in water.
4. Drying and Reassembly: Ensure all parts are completely dry before reassembling the juicer. Reassemble by following the setup instructions in reverse order.

Image: A hand using the specialized cleaning brush to clean the juicer's filter under running water, highlighting the easy-to-clean design.

7. Troubleshooting

If you encounter issues with your juicer, refer to the following common problems and solutions:

If problems persist, please contact SIFENE customer support.

8. Specifications

• Brand: SIFENE
• Model Name: JS8202
• Item Model Number: AMR516
• Color: Red (as per current variant)
• Product Dimensions: 16.55"D x 7.09"W x 16.94"H
• Item Weight: 5.95 pounds
• Maximum Power: 150 Watts
• Voltage: 120 Volts
• Capacity: 600 Milliliters (juice container)
• Number of Speeds: 1 (with additional 'P' for pulse and 'R' for reverse)
• Special Features: Anti-Clog Reverse Function, Cold Press Slow Masticating Technology (45-60 RPM), 4.3-inch Wide Mouth Design, Easy to Clean & Dishwasher Safe Parts, Quiet Motor (<60dB) with Soft/Hard Modes.
• Blade Material: Stainless Steel
• Material: Acrylonitrile Butadiene Styrene (ABS)

9. Warranty and Support

SIFENE provides the following warranty for your juicer:

• 3-Year Free Replacement: For any problems or dissatisfaction.
• 1-Year Warranty: On normal parts.
• 3-Year Warranty: On the motor.

For customer support, please contact SIFENE via email: support@sifene.com.