1. Introduction
Thank you for choosing the Lamicall BP05-B Bike Phone Holder Mount. This manual provides essential information for the safe and efficient use of your product. Please read it thoroughly before installation and operation.
Image: Lamicall Bike Phone Holder Mount securely holding a smartphone on a motorcycle handlebar.
2. Package Contents
Please ensure all components are present before proceeding with installation:
- Lamicall BP05-B Phone Holder Unit
- Handlebar Clamp with Ball Joint
- Mounting Screw and Washer
- Silicone Pads (various sizes for handlebar diameter adjustment)
- Instruction Manual (this document)
Video: Official Lamicall Installation Guide demonstrating package contents and assembly steps.
3. Setup and Installation
Follow these steps to securely attach the phone holder to your handlebar:
- Attach the Clamp: Unscrew the mounting screw from the handlebar clamp. Place the clamp around your desired handlebar location. Use the appropriate silicone pads to ensure a snug fit for handlebar diameters between 0.59 - 1.57 inches (15-40mm). Reinsert and tighten the mounting screw until the clamp is firmly secured.
- Connect Phone Holder to Clamp: The phone holder unit connects to the ball joint on the handlebar clamp. Push the phone holder onto the ball joint and tighten the adjustment knob to secure it at your preferred angle.
Image: Close-up of the quick install clamp, showing its adjustable nature and suitability for different handlebar diameters (0.59-1.57 inches).
Video: Official Lamicall Installation Guide demonstrating the full installation process on a bicycle handlebar.
4. Operating Instructions
The Lamicall BP05-B is designed for convenient one-hand operation.
- Insert Your Phone: Gently push the top arm of the phone holder upwards to expand the grip. Place your smartphone into the holder. The silicone pads will provide shockproof protection and prevent scratches.
- Secure Your Phone: Once the phone is in place, release the top arm. The holder will automatically grip your phone tightly. For added security, locate the red locking lever on the side of the holder and push it to the locked position. This prevents accidental release, especially on bumpy terrain.
- Adjust Viewing Angle: The phone holder features a 360° rotatable design. Loosen the adjustment knob behind the phone holder to rotate your phone to a horizontal or vertical screen orientation. Tighten the knob once the desired angle is achieved.
Image: A cyclist engaging the red locking mechanism on the phone mount for enhanced security.
Video: Official Lamicall video showcasing the 1-second lock and release feature of the phone mount.
5. Compatibility
The Lamicall BP05-B is designed for wide compatibility with various devices and vehicles:
- Phone Size: Compatible with smartphones between 4.7 and 6.8 inches, with a thickness up to 15mm (including phone case).
- Handlebar Diameter: Fits handlebars with a diameter of 0.59 - 1.57 inches (15-40mm).
- Compatible Vehicles: Suitable for various types of bicycles (mountain, road), motorcycles, strollers, shopping carts, electric scooters, indoor treadmills, and indoor bikes.
Image: Multiple smartphones of varying sizes displayed with the Lamicall mount, illustrating its broad device compatibility.
6. Safety and Care
To ensure the longevity of your product and the safety of your device:
- Always ensure the phone is securely locked in the holder before riding.
- Regularly check the tightness of the handlebar clamp and the ball joint adjustment knob.
- The silicone pads provide shockproof protection; avoid exposing the mount to extreme temperatures or harsh chemicals.
- Clean the mount with a soft, damp cloth.
Image: Visual representation of the anti-impact design, emphasizing the protective features of the mount.
7. Troubleshooting
If you encounter any issues, please consider the following:
- Mount feels loose: Ensure the handlebar clamp screw is fully tightened and the correct size silicone pads are used. Check the ball joint adjustment knob for tightness.
- Phone not secure: Verify that the phone is correctly seated in the holder and the red locking lever is engaged.
8. Specifications
| Feature | Detail |
|---|---|
| Model | BP05-B |
| Item Weight | 10.9 ounces |
| Product Dimensions | 8.8 x 3.7 x 1.8 inches |
| Compatible Devices | 4.7-6.8" phones (up to 15mm thickness with case) |
| Handlebar Diameter | 0.59 - 1.57 inches (15-40mm) |
| Mounting Type | Handlebar |
| Special Features | Adjustable, Rotatable, One-Hand Operation, Shockproof Protection |
9. Warranty and Support
For warranty information or technical support, please refer to the product packaging or contact Lamicall customer service directly through their official website or the retailer where the product was purchased.
