OUTON Floor Lamp with Shelves (Model B08R87V15T) User Manual

1. Introduction

Thank you for purchasing the OUTON Floor Lamp with Shelves. This product combines ambient lighting with practical storage and charging capabilities, designed to enhance your living space. This manual provides essential information for safe operation, assembly, and maintenance of your new floor lamp.

Figure 1: Assembled OUTON Floor Lamp with Shelves

2. Safety Instructions

• Read all instructions before assembly and use.
• Do not connect the power until the lamp is fully assembled.
• Ensure the power cord is not pinched or damaged during assembly or placement.
• Use only bulbs with an E26 base and a maximum wattage of 150W. The included LED bulb is 9W.
• Keep the lamp away from water and moisture. This product is for indoor use only.
• Do not exceed the maximum weight capacity of 30 lbs per shelf.
• Unplug the lamp from the power outlet before cleaning or replacing the bulb.
• If any part is damaged or missing, contact customer support immediately. Do not attempt to repair the product yourself.

3. Package Contents

Verify that all components are present and undamaged before proceeding with assembly.

• Floor Lamp Frame (Disassembled)
• Lampshade
• 9W LED Bulb
• Charging Station Module (Integrated)
• User Manual
• Plastic Cable Clips

4. Assembly Instructions

Assembly typically takes approximately 5 minutes and requires no additional tools. Follow these steps carefully:

1. Unpack Components: Carefully remove all parts from the packaging and lay them out on a clean, flat surface.
2. Assemble the Base: Connect the lowest shelf section to the base frame. Ensure all connections are secure.
3. Stack Shelf Sections: Continue to stack and connect the remaining shelf sections, ensuring the charging station module is correctly oriented on the designated shelf.
4. Install the Lampshade: Secure the lampshade to the top section of the lamp frame.
5. Insert the LED Bulb: Screw the provided 9W LED bulb into the E26 bulb base.
6. Cable Management: Use the included plastic clips to neatly secure the power cord along one of the lamp's vertical supports, reducing clutter.
7. Final Placement: Position the assembled lamp in your desired location.

Figure 2: Assembly overview and key features

Figure 3: Customizable shelf arrangements

5. Operating Instructions

5.1. Lighting Control

The lamp features a pull chain switch for easy operation and offers three distinct color temperatures.

• Power On/Off: Pull the chain once to turn the lamp on or off.
• Change Color Temperature: When the lamp is on, pull the chain repeatedly to cycle through the three color temperature settings: Warm White, Cool White, and Daylight.
• Memory Function: The lamp will remember your last selected color temperature setting when turned off and will resume that setting when turned back on.

Figure 4: Three adjustable color temperatures

Figure 5: Pull chain control and memory function

5.2. Charging Station

The integrated charging station allows you to power multiple devices simultaneously.

• USB-A Port: Provides 5V/2A output for standard USB charging.
• Type-C Port: Offers fast charging capabilities for compatible devices.
• AC Outlet: A standard 110V AC outlet for powering small appliances or charging adapters.
• Independent Operation: The charging ports and AC outlet function independently of the lamp's light, allowing you to charge devices whether the light is on or off.

Figure 6: Integrated 3-in-1 charging station

6. Maintenance

• Cleaning: Unplug the lamp before cleaning. Wipe the lamp frame and shelves with a soft, dry cloth. For the lampshade, use a lint-free cloth to gently dust. Do not use abrasive cleaners or solvents.
• Bulb Replacement: Ensure the lamp is unplugged and the bulb has cooled before attempting to replace it. Screw out the old E26 bulb and screw in a new one (max 150W).
• Cord Care: Periodically check the power cord for any signs of damage. If damaged, discontinue use and contact customer support.

7. Troubleshooting

8. Product Specifications

• Model: B08R87V15T
• Brand: OUTON
• Dimensions: 10.25"D x 10.25"W x 63.7"H
• Item Weight: 12 Pounds
• Material: Wood
• Finish Type: Wood
• Bulb Base: E26
• Included Bulb: 9W LED (810 Lumens)
• Max Wattage: 150W
• Color Temperatures: Warm White, Cool White, Daylight
• Switch Type: Pull Chain
• Power Source: Corded Electric (9.5 ft cord)
• Charging Ports: 1x USB-A (5V/2A), 1x Type-C, 1x AC Outlet (110V)
• Shelf Capacity: Up to 30 lbs per shelf
• Indoor/Outdoor Usage: Indoor use only
• UPC: 706898017631

Figure 7: Product dimensions and storage capacity

Figure 8: Example of lamp in use with charging and display

9. Warranty and Customer Support

OUTON is committed to providing high-quality products and customer satisfaction.

• 2-Year Quality Support: This product is covered by a 2-year quality support period from the date of purchase.
• Customer Service: For any issues, questions, or concerns regarding your OUTON Floor Lamp, please contact our customer service team. We offer 24/7 customer support.
• Contact Information: Refer to the contact details provided on the product packaging or the official OUTON website for the most current support information.