Introduction
Thank you for purchasing the AVENLI High Raised Twin Size Inflatable Mattress. This manual provides important information regarding the setup, operation, maintenance, and troubleshooting of your new inflatable mattress. Please read it thoroughly before use to ensure safe and optimal performance.
Image: The AVENLI High Raised Twin Size Inflatable Mattress with its carry bag.
Safety Information
- Do not overinflate the mattress. Overinflation can cause damage and may lead to injury.
- Keep sharp objects away from the mattress to prevent punctures.
- Do not use the mattress near open flames or heat sources.
- Ensure the electric pump is disconnected from the power source when not in use or during cleaning.
- This mattress is designed for indoor use. Avoid prolonged exposure to direct sunlight or extreme temperatures.
- Maximum weight capacity: 100 kg. Do not exceed this limit.
Package Contents
Please check the package to ensure all items are present:
- 1 x AVENLI High Raised Twin Size Inflatable Mattress with Integrated Electric Pump
- 1 x Carry Bag
- 1 x Instruction Manual (this document)
Image: The black carry bag included with the mattress.
Setup Instructions
- Unpack the Mattress: Remove the mattress from its carry bag and unroll it on a clean, flat surface, free from sharp objects.
- Locate the Integrated Pump: The electric pump is integrated into the side of the mattress.
- Inflate the Mattress:
- Ensure the pump's dial is set to the "INFLATE" position.
- Plug the power cord into a standard 220/240V electrical outlet.
- The mattress will begin to inflate automatically. Inflation time is approximately 3-4 minutes.
- Once the desired firmness is reached, turn the dial to "OFF" and unplug the pump. Do not overinflate.
- Close the Valve: Ensure the valve cap is securely closed after inflation to prevent air leakage.
Image: Detailed view of the integrated electric pump with inflate/deflate dial.
Image: Diagram illustrating the internal workings of the electric pump.
Operating Instructions
Using the Mattress
The flocked surface provides a comfortable sleeping experience. The Coil-Beam internal structure ensures stable support.
Image: A person demonstrating the comfort and size of the inflated mattress.
Image: Illustration of the Coil-Beam internal support system.
Image: Close-up view of the soft, flocked top surface.
Deflating and Storing the Mattress
- Prepare for Deflation: Ensure the mattress is clear of any objects.
- Deflate the Mattress:
- Plug the power cord into a standard 220/240V electrical outlet.
- Turn the pump's dial to the "DEFLATE" position.
- The pump will begin to extract air from the mattress. This process takes a few minutes.
- Once fully deflated, turn the dial to "OFF" and unplug the pump.
- Fold and Store: Fold the deflated mattress neatly and place it into the provided carry bag. Store in a cool, dry place away from direct sunlight and extreme temperatures.
Maintenance
- Cleaning: To clean the mattress, wipe it with a damp cloth and mild soap. Do not use harsh chemicals or abrasive cleaners. Ensure the mattress is completely dry before storing.
- Repair: In case of small punctures, a repair kit (not included) can be used. Follow the instructions provided with the repair kit. For larger damage, contact customer support.
- Storage: Store the mattress in its carry bag in a cool, dry place, protected from direct sunlight and extreme temperatures.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Mattress does not inflate/deflate. | Pump not plugged in; power outage; pump dial not set correctly. | Check power connection; ensure power is available; set dial to "INFLATE" or "DEFLATE". |
| Mattress loses air quickly. | Valve not closed properly; small puncture; temperature change. | Ensure valve is sealed; locate and repair puncture; air pressure may decrease slightly in cooler temperatures. |
| Pump is noisy or vibrates excessively. | Normal operation; obstruction in air intake/outlet. | Some noise is normal. Check for any blockages in the pump's air vents. |
Specifications
| Feature | Detail |
|---|---|
| Brand | AVENLI |
| Model | 24041 |
| Dimensions (L x W x H) | 196 x 97 x 47 cm (77 x 38 x 18.5 inches) |
| Material | Floccato PVC (Velvet effect, waterproof, anti-slip) |
| Internal Structure | Coil-Beam |
| Integrated Pump | 220/240V Electric Pump |
| Inflation Time | Approx. 3-4 minutes |
| Maximum Weight Capacity | 100 kg (220 lbs) |
| Weight | 4.75 kg |
| Special Features | Inflatable, Portable, Quick Inflation, Flocked Top, Integrated Pump |
Image: Diagram showing the dimensions of the mattress.
Image: Illustration of the mattress material layers: polyester net and robust PVC.
Warranty and Support
For warranty information and customer support, please refer to the contact details provided on the product packaging or visit the official AVENLI website. Keep your purchase receipt as proof of purchase for any warranty claims.
