Steve Silver Furniture Ottawa Power Lift Chair Recliner User Manual

Introduction

Thank you for choosing the Steve Silver Furniture Ottawa Power Lift Chair Recliner. This manual provides essential information for the safe assembly, operation, and maintenance of your new recliner. Please read these instructions thoroughly before use and retain them for future reference.

Important Safety Information

• Ensure all components are present and undamaged before assembly. Do not use if any parts are missing or broken.
• Keep children and pets away from the chair during operation to prevent injury.
• Do not allow children to play on or with the recliner.
• Keep hands and feet clear of the reclining mechanism to avoid pinching.
• Only use the chair on a level, stable surface.
• Do not stand on the footrest or armrests.
• Unplug the power cord from the outlet before cleaning or servicing the chair.
• Do not expose the chair to excessive moisture or direct sunlight.
• Consult a qualified technician for any repairs or electrical issues.

Package Contents

Please verify that all components are included in your package:

• Recliner Base
• Backrest
• Armrests (2)
• Power Adapter and Cord
• Remote Control
• User Manual (this document)

Setup and Assembly

Assembly is required for this recliner. Follow these steps carefully:

1. Unpack Components: Carefully remove all parts from the packaging. Place them on a soft, clean surface to prevent damage.
2. Attach Backrest: Align the metal brackets on the backrest with the corresponding receivers on the recliner base. Slide the backrest down firmly until it locks into place. You should hear a click.
3. Connect Power: Locate the power cord and adapter. Connect the adapter to the chair's power input, usually located at the back or underneath the base. Plug the power cord into a standard wall outlet.
4. Verify Connections: Ensure all connections are secure before operating the chair.

Operating Instructions

Your Ottawa Power Lift Chair Recliner is equipped with multiple functions for enhanced comfort. All functions are controlled via the wired remote control.

Remote Control Overview

The remote control features dedicated buttons for lift, recline, heat, and massage functions. Familiarize yourself with the button layout before use.

Power Lift Function

To activate the power lift function, press and hold the UP arrow button on the remote. The chair will slowly tilt forward and lift, assisting you in standing up. Release the button to stop at your desired height.

Recline Mechanism (Lay-Flat, Headrest, Footrest)

To recline, press and hold the DOWN arrow button. The footrest will extend, and the backrest will recline. Continue holding to reach the lay-flat position. Release the button to stop at any desired recline angle. The power headrest and footrest adjust simultaneously or independently depending on the model's specific programming.

Heat Function

Press the HEAT button on the remote control to activate the heating function. Press again to cycle through heat settings or turn off. The heat function may have an automatic shut-off for safety.

Massage Function

Press the MASSAGE button to activate the massage function. Repeated presses will cycle through different massage modes: Wave, Standby, and Pulse. Use the +, and - buttons to adjust the massage intensity.

USB Charging

A USB charging port is integrated into the chair, typically located on the side of the remote control or within the side pouch. Connect your compatible devices to charge them while relaxing.

Maintenance and Care

Proper care will extend the life of your recliner.

• Cleaning: For general cleaning, wipe the fabric with a soft, damp cloth. For spills, blot immediately with a clean, dry cloth. Do not use harsh chemicals or abrasive cleaners. Refer to the product care instructions for specific fabric cleaning recommendations.
• Mechanism: Periodically check all bolts and screws to ensure they are tight. Do not lubricate the reclining mechanism unless specifically instructed by the manufacturer.
• Power Cord: Inspect the power cord regularly for any damage. If damaged, discontinue use and contact customer support.

Troubleshooting

Specifications

Warranty and Customer Support

For warranty information, please refer to the product description on the retailer's website or contact Steve Silver Furniture customer support directly. Keep your purchase receipt for warranty claims.

If you encounter any issues not covered in this manual or require further assistance, please contact Steve Silver Furniture customer support.

• Manufacturer: Steve Silver Company
• Website: Steve Silver Furniture Store (for general information)