1. Product Overview
The Fastrack Street Line Analog-Digital Watch NR68016PP03 combines classic analog timekeeping with modern digital functionalities. It features a durable resin case, a comfortable polyurethane strap, and is designed for everyday wear with its water-resistant build.
Figure 1: Front view of the Fastrack Street Line Analog-Digital Watch, featuring an off-white dial with rose gold accents and a matching polyurethane strap. The watch displays both analog hands and a digital readout.
2. Key Features
- Bold Dual Display: Features both analog and digital time for modern multi-functionality.
- Durable Build: Resin case and polyurethane strap ensure comfort, flexibility, and long-term use.
- Everyday Essential Functions: Includes stopwatch, alarm, backlight, and date display.
- Water Resistance: Designed with 100 meters water resistance for daily activities.
- Comfortable Fit: Polyurethane strap with a tang buckle clasp for secure wear.
3. Setup and Initial Use
3.1. Wrist Measurement Guide
To ensure a comfortable fit, measure your wrist size before adjusting the strap. Use a measuring tape and keep it slightly loose for optimal comfort.
Video 1: A quick guide to measuring your wrist for proper watch fit. This video demonstrates how to use a measuring tape to determine your wrist size and provides a dial size comparison for different wrist circumferences.
3.2. Button Functions
The watch features several buttons for operation:
- MODE: Cycles through different digital display modes (Time, Alarm, Stopwatch).
- RESET: Used to reset values in certain modes (e.g., stopwatch).
- ST/STP (Start/Stop): Used to start and stop functions like the stopwatch.
- LIGHT: Activates the backlight for visibility in low light conditions.
4. Operating Instructions
4.1. Setting Analog Time
- Pull out the crown (the small knob on the side of the watch case) to the first click position.
- Rotate the crown to adjust the analog hands to the correct time.
- Push the crown back in to secure the time setting.
4.2. Setting Digital Time and Date
- Press the MODE button repeatedly until the digital display shows the time setting mode (often indicated by flashing digits).
- Use the RESET button to select the digit or setting you wish to change (e.g., hours, minutes, month, day).
- Use the ST/STP button to increase the selected value.
- Once all settings are correct, press the MODE button again to exit the setting mode.
4.3. Using the Stopwatch
- Press the MODE button until the stopwatch display appears.
- Press the ST/STP button to start the stopwatch.
- Press the ST/STP button again to stop the stopwatch.
- Press the RESET button to clear the stopwatch to zero.
4.4. Using the Alarm
- Press the MODE button until the alarm setting display appears.
- Use the RESET button to select the hour or minute digits.
- Use the ST/STP button to adjust the alarm time.
- Press the MODE button to confirm and activate the alarm.
- To turn the alarm on/off, typically press ST/STP while in alarm mode.
4.5. Using the Backlight
Press the LIGHT button to illuminate the digital display for a few seconds, improving visibility in dark environments.
5. Maintenance
5.1. Cleaning Your Watch
To maintain the appearance of your watch, wipe it regularly with a soft, dry cloth. For stubborn dirt, a slightly damp cloth can be used, followed by immediate drying. Avoid using harsh chemicals or abrasive cleaners.
5.2. Water Resistance
This watch is water-resistant up to 100 meters. This means it is suitable for showering, swimming, and snorkeling. However, it is not suitable for scuba diving. Do not operate the buttons while the watch is wet or submerged to prevent water ingress.
5.3. Battery Replacement
When the watch battery runs low, the digital display may dim or the watch may stop functioning. Battery replacement should be performed by an authorized service center to ensure proper sealing and water resistance.
6. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Watch not running or digital display is blank. | Low or dead battery. | Replace the battery at an authorized service center. |
| Incorrect time displayed (analog or digital). | Time not set correctly or accidental adjustment. | Refer to Section 4.1 and 4.2 to reset the time. |
| Water inside the watch. | Buttons operated underwater or seal compromised. | Immediately take the watch to an authorized service center. Do not attempt to dry it yourself. |
| Backlight not working. | Battery low or internal fault. | Check battery or contact customer support. |
7. Specifications
Video 2: A visual overview of the Fastrack Street Line Analog-Digital Watch, highlighting its design, materials, and key dimensions such as case diameter and thickness.
| Feature | Detail |
|---|---|
| Model Name | Street Line |
| Model Number | NR68016PP03 |
| Brand | Fastrack |
| Display Type | Analog-Digital |
| Movement Type | Quartz |
| Power Source | Battery Powered |
| Strap Type | Polyurethane Strap |
| Band Material | Polyurethane |
| Band Colour | Off-White |
| Clasp Type | Buckle |
| Case Material | Metal |
| Case Shape | Round |
| Case Diameter | 50 Millimetres |
| Case Thickness | 16.6 Millimetres |
| Band Width | 22 Millimetres |
| Band Length | 24.5 Centimetres |
| Crystal Material | Acrylic |
| Dial Colour | Off White |
| Water Resistance Depth | 100 Metres |
| Item Weight | 200 Grams |
| Country of Origin | India |
8. Warranty and Support
8.1. Warranty Information
The Fastrack Street Line watch comes with a 12-month manufacturer warranty on manufacturing defects. To avail warranty services, present your original invoice at any authorized Titan Service Center. No separate warranty card is required.
For more details or service-related queries, you may contact Titan India:
- Toll-Free Number: 1800-266-0123 (10 AM to 7 PM, any day of the week)
- Email: customercare@titan.co.in
8.2. Manufacturer Details
Manufacturer: Titan Company Limited, Sipcot Industrial Complex, Hosur, Tamil Nadu - 635129, India.
Telephone: +91-(0)4344-664199
