EROMMY Accent Chair

EROMMY Adjustable Reclining Accent Lounge Chair User Manual

Model: Accent Chair (B08R5DL97K)

1. Important Safety Information

Please read all instructions carefully before assembly and use. Keep this manual for future reference.

  • Ensure all parts are present and undamaged before assembly. Do not use if any parts are missing or broken.
  • Assemble the chair on a soft, clean surface to prevent scratches.
  • Tighten all screws and bolts securely. Periodically check and re-tighten as necessary.
  • Do not exceed the maximum weight capacity of the chair.
  • Keep children and pets away from the assembly area.
  • Use the chair only for its intended purpose as a lounge chair.

2. Package Contents

Verify that all components are included in your package:

  • Chair Backrest
  • Chair Seat with Retractable Footrest Mechanism
  • Left Armrest
  • Right Armrest
  • Left Leg Frame
  • Right Leg Frame
  • Hardware Pack (screws, bolts, washers, Allen wrench)
  • User Manual

3. Assembly Instructions

Assembly of this lounge chair is designed to be straightforward and can be completed in a few minutes. All parts are labeled, and necessary tools are included.

  1. Unpack Components: Carefully remove all parts from the packaging and lay them out on a soft, flat surface to prevent damage.
  2. Attach Leg Frames: Connect the left and right leg frames to the chair seat using the provided hardware. Ensure the frames are oriented correctly as per the diagrams in the included physical manual.
  3. Secure Backrest: Attach the chair backrest to the seat and leg frame assembly. Align the pre-drilled holes and secure with bolts. Ensure the fabric does not obstruct any bolt holes; gently clear if necessary.
  4. Install Armrests: Fasten the wooden armrests to the side frames of the chair. Make sure they are firmly attached.
  5. Final Tightening: Once all components are loosely assembled, go back and tighten all screws and bolts securely with the provided Allen wrench. Do not overtighten.
EROMMY Accent Lounge Chair in a living room setting with a laptop on a side table.

The EROMMY Accent Lounge Chair, fully assembled, showcasing its grey fabric, wooden armrests, and black metal frame, with the footrest extended.

Diagram showing the dimensions of the EROMMY Accent Lounge Chair.

A diagram illustrating the chair's dimensions: 19.5 inches back width, 23.6 inches seat width, 36.2 inches total height, 21.5 inches seat height, 19.7 inches seat depth, and 33.9 inches total depth with footrest extended.

4. Operating Instructions

The EROMMY Accent Lounge Chair features adjustable components for personalized comfort.

4.1 Backrest Adjustment

The chair's backrest offers five adjustable angles, allowing you to customize your seating position for various activities such as reading, watching television, or resting. To adjust, gently lean back or forward while applying slight pressure to the backrest until it clicks into your desired position.

Image showing the 5-level backrest adjustment mechanism of the EROMMY Accent Lounge Chair.

The chair's backrest can be adjusted to five different angles, suitable for various activities like reading, sleeping, or resting. An illustration demonstrates the range of motion.

4.2 Retractable Footrest

The integrated retractable footrest provides additional leg support and comfort. To extend the footrest, pull it outwards from beneath the seat. To retract, push it back inwards until it is fully stored under the seat. The footrest can be adjusted to accommodate different user heights.

Close-up of the EROMMY Accent Lounge Chair highlighting its ergonomic features: comfortable wooden armrests and retractable footrest.

This image details the ergonomic design, featuring comfortable wooden armrests and the retractable footrest, which can be adjusted for leg support.

4.3 Ergonomic Design

The chair is designed with an ergonomic structure, including an adjustable headrest, to provide optimal support for the head, neck, and lumbar region. This design aims to enhance comfort during prolonged sitting.

5. Maintenance

Proper care and maintenance will extend the life of your EROMMY Accent Lounge Chair.

  • Cleaning Fabric: For general cleaning, use a soft cloth or brush to remove dust and loose debris. For spills, blot immediately with a clean, dry cloth. For stubborn stains, use a mild fabric cleaner according to the product instructions, testing on an inconspicuous area first.
  • Cleaning Metal Frame: Wipe the metal frame with a damp cloth and mild soap. Dry thoroughly to prevent rust.
  • Wooden Armrests: Wipe with a soft, damp cloth. Avoid harsh chemicals that may damage the wood finish.
  • Hardware Check: Periodically check all bolts and screws to ensure they remain tight. Re-tighten if necessary to maintain stability and safety.
  • Avoid Direct Sunlight: Prolonged exposure to direct sunlight can cause fabric fading and material degradation.
Close-up of the EROMMY Accent Lounge Chair showing material details: technical fabric, sponge padding, sturdy metal frame, and protective floor mats.

Details of the chair's construction, including the comfortable and breathable technical fabric, excellent sponge padding, sturdy metal frame, and protective floor mats to prevent floor damage.

6. Troubleshooting

If you encounter issues with your chair, refer to the following common problems and solutions:

  • Chair feels unstable or wobbly:
    Solution: Ensure all bolts and screws are securely tightened. Check that the leg frames are correctly installed and on a flat surface.
  • Difficulty adjusting backrest or footrest:
    Solution: Ensure there are no obstructions in the adjustment mechanisms. Apply gentle, even pressure when adjusting. If the mechanism feels stiff, check for any debris or misalignment.
  • Discomfort when sitting:
    Solution: Verify that the chair was assembled correctly and no internal components are misaligned or exposed. Ensure the backrest and footrest are adjusted to a comfortable position.
  • Missing parts or damaged components:
    Solution: Do not proceed with assembly. Contact EROMMY customer support immediately for assistance and replacement parts.

7. Specifications

FeatureDetail
BrandEROMMY
ModelAccent Chair
ColorGrey
Product Dimensions (D x W x H)23.6"D x 19.7"W x 36.2"H
MaterialAlloy Steel, Metal, Technical Cloth Fabric
Special FeaturesAdjustable backrest (5 levels), Retractable footrest
Recommended UsesReading, Resting
Room TypeBedroom, Living Room
Indoor/Outdoor UsageIndoor
Form FactorErgonomic

8. Warranty Information

Specific warranty details for the EROMMY Accent Lounge Chair are typically provided with the product packaging or can be obtained directly from the manufacturer. Please refer to the documentation included with your purchase for comprehensive warranty terms and conditions.

9. Customer Support

For further assistance, questions, or to report missing/damaged parts, please contact EROMMY customer service. You may also visit the official EROMMY store for more product information and support resources.

EROMMY Official Store: https://www.amazon.com/stores/EROMMY/page/59E006BB-C7D3-4B77-B450-F95396D2E20A

Related Documents - Accent Chair

Preview XWCL-158 Sunlounger Assembly Instructions
Comprehensive assembly instructions for the EROMMY XWCL-158 Sunlounger, detailing parts identification and step-by-step assembly procedures for outdoor use.
Preview Accent Chair Assembly Instructions - Step-by-Step Guide
Detailed instructions for assembling your accent chair. Includes a complete parts list and step-by-step visual guides for easy setup. Ensure all parts are present before beginning assembly.
Preview Accent Chair Assembly Instructions - Model 194840309116
Official assembly instructions for the Accent Chair (Item No: 194840309116). Includes detailed parts list, hardware list, and step-by-step visual guides in English and French for easy furniture assembly.
Preview Wyatt Accent Chairs Assembly Instructions - Item G35-47T
Step-by-step assembly instructions for the Wyatt Accent Chairs (Item# G35-47T), including parts list, hardware details, assembly steps, warnings, and troubleshooting.
Preview Happiness Installation: Accent Chair Assembly Guide
Comprehensive assembly instructions for the Happiness Accent Chair. Includes a detailed parts list, step-by-step guidance, and essential safety warnings for a smooth setup.
Preview EROMMY LYOT-015BR Metal Outdoor Rocking Chair Assembly Instructions
Detailed assembly instructions for the EROMMY LYOT-015BR metal outdoor rocking chair, including parts list and step-by-step guidance for assembly.