Product Overview
The Visionis VIS-3000 is an advanced indoor and outdoor rated IP68 metal digital touch keypad and proximity card reader, designed for standalone access control systems. It integrates seamlessly with a mini controller, offering enhanced security and versatile access options. This kit includes the VIS-3000 keypad, the VIS-MINI-CNTRL mini controller, and a 12V 2Amp power supply.
Image: The complete Visionis VIS-3000 kit, showing the keypad, mini controller, and power supply unit.
Key Features:
- IP68 Rated: Suitable for both indoor and outdoor installations, offering robust weather resistance.
- Multiple Access Modes: Supports PIN code entry, proximity card, and proximity key tag for flexible access.
- High User Capacity: Manages up to 1,000 users.
- Integrated Mini Controller: The VIS-MINI-CNTRL provides enhanced security by storing user credentials internally, preventing tampering with the external keypad.
- Wiegand 26 Output: Compatible with various Wiegand readers and access control systems.
- Durable Construction: Features a metal material and backlight metal keyboard for longevity and ease of use in low light.
Package Contents
Verify that all components are present in your package:
- (1) VIS-3000 Access Control Keypad + Reader
- (1) VIS-MINI-CNTRL 1 Door Controller
- (1) VISCP200: 12V 2Amp Power Supply Transformer (UL Listed)
- (1) Remote Control
- (1) Diode IN4004 (for relay circuit protection)
- (2) Master Add Card
- (2) Master Delete Card
- Self-tapping screws and wall anchors
- Screwdriver
- Wiring harness
- User Manual
Image: A visual representation of the components included in the Visionis VIS-3000 kit, such as the mini controller, remote, master cards, and installation hardware.
Keypad and Controller Details
Keypad Dimensions and Features:
Image: Technical drawing showing the dimensions of the VIS-3000 keypad: 118mm (4.64in.) height, 81mm (3.18in.) width, and 21mm (0.82in.) depth.
- Input Voltage: DC 12V
- Operating Temperature: -45°C ~ 55°C (-49°F ~ 131°F)
- Operating Humidity: 0% ~ 95%
- Searching Time: Less than 0.1s after reading card.
- Backlight Keypad: Easy to operate at night.
- External Wired Doorbell Support: Connect an external doorbell.
- Card Compatibility: Supports 125KHz for EM cards and 13.56MHz for MFR cards.
Image: Illustration of the various access methods supported by the keypad: card or keytag reader, PIN code, and using a phone with NFC (not compatible with iOS).
Mini Controller (VIS-MINI-CNTRL)
The VIS-MINI-CNTRL is a compact controller designed for single door access control. It enhances security by housing user credentials and control logic internally, making the external keypad a simple reader. This prevents unauthorized access even if the keypad is tampered with.
Image: Technical drawing showing the dimensions of the VIS-MINI-CNTRL mini controller: 65mm (2.56in.) length, 54mm (2.13in.) width, and 19mm (0.75in.) height.
The mini controller features a Wiegand 26-37 bits input, allowing it to connect to a wide range of Wiegand readers, including the VIS-3000 keypad and other biometric or keypad readers.
Image: Diagram illustrating how the VIS-MINI-CNTRL mini controller can connect to various Wiegand-compatible keypads and readers.
Installation Considerations
For optimal security, the VIS-MINI-CNTRL mini controller should be installed inside a restricted area, such as within the facility or a secure enclosure. This ensures that all sensitive user data and control logic are protected from external tampering. The external keypad acts solely as an input device.
Image: Diagram showing the recommended installation of the mini controller inside a secure area and the keypad on the outside. If the external keypad is tampered with, the door remains locked as the mini controller manages the locking device.
The VIS-3000 keypad is IP68 rated, meaning it is highly resistant to dust and water ingress, making it suitable for outdoor use in various weather conditions.
Video: An overview of the VIS-3000 product, highlighting its features, components, and weather resistance. This video demonstrates the keypad's IP68 rating and its ability to function in harsh conditions.
Operating Instructions
Adding Users:
- Enter Programming Mode: Press * then your Master Code (default is 123456) then #.
- Add User Card: Press 1 then present the user card to the keypad.
- Add User PIN: Press 2 then enter a 4-6 digit PIN, then #.
- Add User Card + PIN: Press 3 then present the user card, then enter a 4-6 digit PIN, then #.
- Exit Programming Mode: Press * to exit.
Deleting Users:
- Enter Programming Mode: Press * then your Master Code then #.
- Delete Single User: Press 4 then enter the user's PIN or present their card.
- Delete All Users: Press 5 (use with caution, this will remove all programmed users).
- Exit Programming Mode: Press * to exit.
Changing Master Code:
- Enter Programming Mode: Press * then current Master Code then #.
- Change Code: Press 0 then enter new 4-6 digit Master Code, then #.
- Exit Programming Mode: Press * to exit.
Maintenance
The Visionis VIS-3000 and VIS-MINI-CNTRL are designed for low maintenance. Regular cleaning of the keypad surface with a soft, damp cloth is recommended to remove dust and grime. Avoid using abrasive cleaners or solvents that could damage the finish or electronic components.
- Periodically check all wiring connections for tightness and signs of wear.
- Ensure the power supply is free from obstructions and well-ventilated.
- In outdoor installations, regularly inspect the keypad for any signs of water ingress or damage to the seals.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Keypad not responding. | No power; loose connection; damaged unit. | Check power supply and connections. Ensure 12V DC is present. If issues persist, contact support. |
| Card/PIN not granting access. | Incorrect card/PIN; user not programmed; card type mismatch. | Verify card/PIN. Ensure user is correctly programmed. Check if card type (EM/MFR) matches keypad's supported types. |
| Door does not unlock. | Wiring error to lock; lock malfunction; power issue. | Verify wiring between controller and lock. Test the lock independently. Ensure sufficient power to the lock. |
| Keypad backlight not working. | Internal fault. | Contact technical support for assistance. |
Specifications
| Feature | Detail |
|---|---|
| Model | VIS-3000 (Keypad), VIS-MINI-CNTRL (Controller) |
| Brand | Visionis |
| ASIN | B08R44FVS5 |
| Voltage | 12 Volts DC |
| User Capacity | Up to 1,000 users |
| Wiegand Interface | Wiegand 26-37 bits input (Controller) |
| Operating Temperature | -45°C ~ 55°C (-49°F ~ 131°F) |
| Operating Humidity | 0% ~ 95% |
| IP Rating | IP68 (Keypad) |
| Card Frequency | 125KHz (EM), 13.56MHz (MFR) |
Warranty and Support
Warranty information for the Visionis VIS-3000 Access Control Kit is typically provided by the manufacturer. Please refer to the documentation included with your product or visit the official Visionis website for detailed warranty terms and conditions.
For technical support, troubleshooting assistance, or inquiries regarding your product, please contact the seller or the manufacturer directly. Contact information can usually be found on the product packaging, the manufacturer's website, or through your point of purchase.
