1. Introduction
Thank you for purchasing the UGREEN Tablet Arm Stand. This product is designed to provide a stable and adjustable mounting solution for your tablet or smartphone, enhancing your viewing experience whether you are in bed, at a desk, or in other settings. Please read this manual carefully before use to ensure proper installation and operation.

Image: UGREEN Tablet Arm Stand in a desk setup, holding a tablet.
2. Product Components
The UGREEN Tablet Arm Stand consists of the following main components:
- Adjustable Arm: Made from carbon steel, providing stability and flexibility.
- Device Holder: Securely grips tablets and smartphones from 4.0 to 12.9 inches. Features silicone pads to prevent scratches.
- Desk/Bedside Clamp: A screw-type clamp with silicone pads for secure attachment to surfaces up to 75mm thick, compatible with both vertical and horizontal surfaces.
- Ball Joint: Allows for 360-degree rotation of the device holder.

Image: Key features including 360-degree rotation, double spring arm, and silicone mat on the clamp.
3. Setup Instructions
Follow these steps to assemble and install your UGREEN Tablet Arm Stand:
- Attach the Device Holder: Connect the device holder to the arm stand using the ball joint. Ensure it is securely tightened for stable rotation.
- Mount the Clamp: Choose a suitable surface (desk, bedside, etc.) that is between 0-75mm thick. Unscrew the clamp to open it, position it on the surface, and then tighten the screw until the clamp is firmly secured. The clamp features silicone pads to protect your furniture.
- Insert the Arm: Insert the main arm into the designated hole on the clamp base. Ensure it is fully seated and stable.
- Secure Your Device: Gently pull the sides of the device holder to expand it, then place your tablet or smartphone (4.0-12.9 inches) into the holder. Release the sides to securely grip the device.

Image: The UGREEN Tablet Arm Stand components, illustrating the parts involved in the assembly process.
The clamp is designed for both vertical and horizontal surfaces, offering versatile placement options.

Image: Detail of the adjustable clamp base, showing maximum opening of 75mm and screw-fixed mechanism for stability.
4. Operating Instructions
Once assembled, the UGREEN Tablet Arm Stand offers flexible positioning for your device:
- Adjusting the Arm: The carbon steel arm can be bent and positioned to your desired height and distance. The double spring mechanism provides stable support.
- Rotating the Device: The ball joint allows for 360-degree rotation, enabling you to switch between portrait and landscape orientations effortlessly.
- Angle Adjustment: The device holder can be tilted and swiveled to achieve the optimal viewing angle, reducing strain on your neck and eyes.

Image: Demonstrates the benefit of multi-angle adjustment for comfortable viewing.
The holder is designed to allow access to charging ports, ensuring your device can remain powered during use.

Image: Device holder with charging port access.
5. Maintenance
To ensure the longevity and optimal performance of your UGREEN Tablet Arm Stand:
- Cleaning: Wipe the stand with a soft, dry cloth. Avoid using abrasive cleaners or solvents.
- Tightening: Periodically check all screws and joints to ensure they are tight. Re-tighten if necessary to maintain stability.
- Storage: When not in use, the arm can be folded compactly to save space.
6. Troubleshooting
If you encounter any issues with your tablet arm stand, refer to the following common solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Stand is unstable or sags. | Clamp not tightened sufficiently; arm joints are loose; device is too heavy. | Ensure the clamp is securely tightened to the surface. Check and tighten all arm joints. Verify your device's weight does not exceed the maximum load capacity (1.5kg). |
| Device slips from the holder. | Device not properly secured; device size outside compatible range. | Ensure the device is centered and firmly gripped by the holder. Confirm your device is within the 4.0-12.9 inch compatibility range. |
| Difficulty adjusting the arm. | Joints are too tight. | Apply gentle force. If joints are excessively stiff, ensure no foreign objects are obstructing movement. |
7. Specifications
| Feature | Detail |
|---|---|
| Model Number | 30422 |
| Brand | UGREEN |
| Material | Carbon Steel |
| Color | Black |
| Compatible Device Size | 4.0 - 12.9 inches |
| Max Load Capacity | 1.5 kg |
| Clamp Thickness Range | Up to 75 mm (2.95 inches) |
| Rotation | 360-degree (device holder) |
| Product Weight | 600 g |
| Compatible Devices | iPad Pro 7.9 / 9.7 / 10.5 / 12.9, iPad Air 2/3/4, iPad Mini 2/3/4, Samsung Tab Galaxy S8/S7/S6, Note 6/5, LG, Sony, Android Nexus 7, Kindle, Switch, Fire HD, Huawei MediaPad, iPhone 14/13/12/11/SE/8/7/6/6s Plus, and other similar devices. |

Image: Detailed dimensions of the UGREEN Tablet Arm Stand.
8. Warranty and Support
UGREEN provides a 24-month warranty period for this product from the date of purchase. This warranty covers manufacturing defects and issues arising from normal use.
Exclusions: The warranty does not cover damage caused by intentional misuse, unauthorized modifications, or third-party actions.
For warranty claims or technical support, please contact UGREEN customer service through the retailer where you purchased the product or visit the official UGREEN website for contact information.