AK-Interactive 3rd Gen Acrylics Neon Colors Paint Set Instruction Manual

Introduction

This manual provides instructions for the AK-Interactive 3rd Generation Acrylics Neon Colors Paint Set. This set includes six acrylic paints designed to create vibrant neon and fluorescent effects on figures and models. These paints are formulated for high coverage and adhesion, suitable for both brush and airbrush application when properly diluted.

Product Contents

The AK-Interactive 3rd Gen Acrylics Neon Colors Paint Set includes six 17ml bottles of acrylic paint:

• AK11049 Fluorescent Yellow
• AK11068 Fluorescent Magenta
• AK11081 Fluorescent Orange
• AK11082 Luminous Orange
• AK11129 Fluorescent Green
• AK11178 Fluorescent Blue

Setup and Preparation

Ensure your workspace is clean and well-ventilated. Shake each paint bottle thoroughly before use to ensure proper pigment mixing and consistency.

Surface Preparation

For optimal adhesion and color vibrancy, apply paints to a clean, dry, and properly primed surface. These paints are suitable for a variety of modeling and craft surfaces.

Operating and Application Instructions

Brush Application

These 3rd Generation acrylics offer high coverage and adhesion when applied by brush. Use a clean brush and apply paint in thin, even coats. Allow each coat to dry completely before applying the next to build up color intensity and achieve desired opacity.

Airbrush Application

For airbrushing, dilute the paints with a dedicated acrylic thinner. The dilution ratio may vary depending on your airbrush model, nozzle size, and desired consistency. Start with a small amount of thinner and gradually add more until the paint flows smoothly through the airbrush without clogging. Test on a scrap surface before applying to your model.

Mixing Colors

The paints in this set can be easily mixed with each other to create custom neon shades and smooth transitions between colors. Mix on a palette before application.

Achieving Fluorescent Effects

The intensity of these pigments is specifically designed to create strong neon and fluorescent effects. For maximum vibrancy and glow, it is recommended to apply these paints over a light-colored or white base coat.

Maintenance and Care

Cleaning Tools

Clean brushes and airbrush equipment immediately after use with water or a suitable acrylic cleaner. This prevents paint from drying and hardening, which can damage your tools.

Storage

Store paint bottles upright in a cool, dry place, away from direct sunlight and extreme temperatures. Ensure caps are tightly sealed after each use to prevent the paint from drying out.

Troubleshooting

Paint is too thick for airbrushing

If the paint is too thick, add more dedicated acrylic thinner gradually until the desired consistency is achieved. Always test the consistency before full application.

Poor coverage or streaking

Ensure the surface is properly primed and clean. Apply paint in thinner, multiple coats, allowing each to dry completely. Over-thinning can also lead to poor coverage.

Paint drying too quickly on brush or in airbrush nozzle

Consider using a retarder or flow improver specifically designed for acrylic paints. Working in a more humid environment or using a wet palette for brush painting can also help.

Specifications

Warranty and Support

For warranty information or technical support regarding your AK-Interactive 3rd Gen Acrylics Neon Colors Paint Set, please contact AK Interactive directly through their official website or authorized distributors. Keep your purchase receipt as proof of purchase for any inquiries.