Adesso Barton Floor Lamp (Model SL1166-21) - Instruction Manual

1. Product Overview

The Adesso Barton Floor Lamp, Model SL1166-21, is designed to provide adjustable lighting with a modern farmhouse aesthetic. Featuring an antique brass finish and an oatmeal linen fabric shade, this lamp offers both functionality and style. Its height can be adjusted from 57 to 65.5 inches to suit various spaces.

Image 1: The Adesso Barton Floor Lamp, showcasing its antique brass finish and oatmeal linen shade.

2. Safety Information

• Ensure the lamp is unplugged before assembly, cleaning, or bulb replacement.
• This product is UL or ETL listed, indicating compliance with government-regulated safety standards for the USA.
• Do not exceed the maximum wattage specified for the bulb.
• Keep the lamp away from water and moisture. This product is not waterproof.
• Place the lamp on a stable, level surface to prevent tipping.

3. Package Contents

Verify that all components are present before beginning assembly:

• Lamp Base
• Lower Pole Section
• Adjustable Pole Section with Decorative Joint
• Upper Pole Section with Socket
• Oatmeal Linen Fabric Shade
• Shade Ring (pre-attached to socket)
• Finial

4. Setup and Assembly Instructions

Follow these steps to assemble your Adesso Barton Floor Lamp:

1. Unpack Components: Carefully remove all parts from the packaging and lay them out on a clean, soft surface to prevent scratches.
2. Attach Lower Pole to Base: Screw the lower pole section clockwise into the lamp base until secure. Ensure the power cord is not twisted.
   

   Image 2: Detail of the sturdy antique brass base, showing the connection point for the lamp pole.

3. Connect Adjustable Pole: Screw the adjustable pole section onto the lower pole section.
4. Connect Upper Pole: Screw the upper pole section (with the socket) onto the adjustable pole section. Gently pull any excess cord through the base as you assemble to ensure a snug fit and prevent tangling.
5. Attach Shade: Unscrew the shade ring from the lamp socket. Place the oatmeal linen fabric shade onto the socket, ensuring it rests evenly. Screw the shade ring back onto the socket to secure the shade.
   

   Image 3: The oatmeal linen fabric shade attached to the lamp socket, secured by the shade ring.

6. Install Bulb: Insert one E26 Medium base bulb (not included) into the lamp socket. Do not exceed 100 watts. LED bulbs are recommended.
7. Adjust Height: Loosen the decorative joint on the pole to adjust the lamp's height between 57 and 65.5 inches. Tighten the joint firmly once the desired height is achieved.
   

   Image 4: The decorative joint on the lamp pole, used for height adjustment.

8. Plug In: Plug the lamp into a standard electrical outlet.

5. Operating Instructions

The Adesso Barton Floor Lamp is operated using a rotary switch located on the socket.

• To Turn On: Rotate the switch clockwise until you hear a click and the light illuminates.
• To Turn Off: Rotate the switch counter-clockwise until you hear a click and the light turns off.

6. Maintenance

• Cleaning: Ensure the lamp is unplugged before cleaning. Wipe the metal surfaces with a soft, dry cloth. For the fabric shade, use a lint roller or a soft brush to remove dust. Do not use abrasive cleaners or polishes.
• Bulb Replacement: Always unplug the lamp before replacing the bulb. Allow the old bulb to cool completely before removing it. Screw in a new E26 Medium base bulb, ensuring it does not exceed 100 watts.

7. Troubleshooting

8. Specifications

9. Official Product Video

Watch the official Adesso video for an overview of their lighting products, showcasing various styles and features.

10. Warranty and Support

The Adesso Barton Floor Lamp comes with a manufacturer's warranty. For specific warranty details or technical support, please refer to the official Adesso website or contact their customer service directly.

For further assistance, please visit the Adesso Store on Amazon or the manufacturer's official website.