FUKKUDA Electric Candle Lighter User Manual

Introduction

Welcome to the FUKKUDA Electric Candle Lighter user manual. This guide provides essential information for the safe and efficient use of your new electric lighter.

Setup

Charging Your Lighter

Your FUKKUDA Electric Candle Lighter is equipped with a built-in rechargeable battery. Follow these steps to charge your device:

1. Connect the provided USB charging cable to the lighter's charging port.
2. Plug the other end of the USB cable into a compatible power source (e.g., computer, power bank, wall adapter).
3. The power indicator lights will illuminate to show the charging status. All four lights indicate a full charge.

Operating Instructions

Powering On and Off

1. To activate the lighter, slide the safety switch upwards to expose the power button.
2. Press and hold the power button to initiate the plasma arc.
3. Release the power button to turn off the arc.
4. Slide the safety switch downwards to cover the power button when not in use.

Lighting a Candle

1. Ensure the lighter is charged.
2. Slide up the safety switch and press the power button.
3. Position the plasma arc near the candle wick. The arc will ignite the wick.
4. The electric arc will automatically turn off after 7 seconds of continuous use as a safety feature.

Safety Information

• Plasma Flameless Arc Technology: The revolutionary plasma flameless arc technology ensures energy concentration, smoke-free, odorless, and windproof operation.
• Caution: DO NOT touch the arc with hands.
• 7s Auto Off: The electric arc will automatically turn off after 7 seconds per use to prevent prolonged activation.
• Double Safety Switch: The power button is located under a safety switch, preventing accidental ignition when stored in a pocket or bag.
• Normal Operation Sound: During ignition, a "zee, zee" noise is normal.
• Keep out of reach of children.
• Do not expose to extreme temperatures or direct sunlight.
• Do not immerse in water or other liquids.

Maintenance

• Clean the arc contacts regularly with a dry cloth to ensure optimal performance.
• Store the lighter in a cool, dry place when not in use.
• Avoid dropping the device to prevent damage.

Troubleshooting

Lighter Not Activating

• Check battery level: Ensure the lighter is fully charged.
• Verify safety switch position: Make sure the safety switch is slid upwards and the power button is pressed.
• Clean contacts: Ensure the arc contacts are free from debris.

Arc is Weak or Inconsistent

• Recharge the battery: A low battery can affect arc strength.
• Clean arc contacts: Residue can interfere with the arc.

Specifications

Warranty and Support

For warranty information or technical support, please contact FUKKUDA customer service through the retailer where the product was purchased. Keep your purchase receipt for proof of purchase.