1. Introduction
Thank you for choosing the Mount-It! MI-859 Universal Tabletop TV Stand. This stand is designed to provide a stable and adjustable base for your television, offering height adjustment and a fixed tilt function. Please read this manual thoroughly before installation and use to ensure proper setup and safe operation.
Safety Information
- Ensure all components are present and undamaged before assembly. Do not use if any parts are missing or defective.
- This stand is designed for televisions between 32 and 70 inches and with a maximum weight of 110 lbs (50 kg). Do not exceed these limits.
- Verify your TV's VESA mounting pattern is compatible (75x75mm to 800x400mm).
- Assemble the stand on a soft, clean surface to prevent scratches.
- Always use two people to lift and position the television onto the stand.
- Ensure the stand is placed on a stable, level surface to prevent tipping.
- Keep children and pets away during assembly.
Package Contents
Please check that all parts are included in your package:
- Left and Right TV Stand Legs
- Mounting Brackets (for TV attachment)
- Hardware Kit (various screws, washers, spacers for TV mounting)
- Assembly Tools (e.g., Allen wrench)
- Instruction Manual
2. Setup and Assembly
Follow these steps carefully to assemble your Mount-It! MI-859 TV stand.
Step 1: Prepare the TV Stand Components
Unpack all components and lay them out on a protected surface. Identify the left and right stand legs and the mounting brackets.
Image: The individual components of the Mount-It! MI-859 tabletop TV stand, including the two stand legs and the vertical mounting arms.
Step 2: Attach Mounting Brackets to TV
Carefully place your TV face down on a soft, clean surface. Identify the VESA mounting holes on the back of your TV. Select the appropriate screws, washers, and spacers from the hardware kit that fit your TV's VESA pattern. Attach the vertical mounting brackets to the back of your TV, ensuring they are securely fastened and aligned.
Image: Rear view of a television with the Mount-It! stand legs securely attached to the VESA mounting points.
Image: Diagram illustrating various VESA mounting patterns supported by the stand, ranging from 75x75mm to 800x400mm, with a 110 lbs capacity icon.
Step 3: Assemble the Stand Legs
Connect the base of each stand leg to the vertical support. Ensure the foam pads are correctly positioned on the bottom of the stand feet to protect your furniture. The stand offers multiple height settings; choose the desired height before securing the legs. Refer to the height adjustment diagram for options.
Image: Diagram showing three different height levels for the TV stand: 23.4 inches, 26.2 inches, and 28.9 inches, indicating adjustability for various TV sizes.
Image: Close-up details of the stand, highlighting the integrated cable management feature to keep wires organized and the foam pads on the base to protect surfaces from scratches.
Step 4: Mount the TV onto the Stand Legs
With assistance, carefully lift the TV and align the mounting brackets attached to the TV with the vertical supports of the stand legs. Secure the TV to the stand legs using the provided screws. Ensure all connections are tight and the TV is stable before releasing it.
Image: A television mounted on the Mount-It! tabletop stand, placed on a media console, demonstrating its stable and elevated position.
Image: A diagram showing a television screen with an arrow indicating compatibility for screen sizes ranging from 32 to 70 inches, along with a 110 lbs capacity icon.
3. Operating Instructions
Height Adjustment
The Mount-It! MI-859 stand offers multiple height settings. To adjust the height, you will need to detach the TV from the stand legs, reposition the vertical supports to the desired height level, and then reattach the TV. Ensure the TV is securely fastened at the new height.
Tilt Function
This stand features a fixed tilt function of 6 degrees. This tilt is set during assembly by choosing the appropriate mounting holes on the vertical brackets. It is not designed for on-the-fly adjustment. If you wish to change the tilt angle, you will need to detach the TV and reconfigure the mounting brackets.
Image: Diagram illustrating the fixed tilt function of the TV stand, showing a +6/-6 degree tilt capability to reduce glare and optimize viewing angles.
4. Maintenance
To ensure the longevity and safe operation of your TV stand, follow these maintenance guidelines:
- Cleaning: Wipe the stand with a soft, dry cloth. Avoid abrasive cleaners or solvents that could damage the finish.
- Periodic Checks: Periodically check all screws and connections to ensure they remain tight and secure. Loose connections can compromise stability.
- Weight Limit: Do not place items on the TV that exceed the stand's weight capacity or obstruct ventilation.
5. Troubleshooting
If you encounter any issues with your Mount-It! MI-859 TV stand, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| TV is not stable or wobbles. | Loose screws; uneven surface; TV weight exceeds capacity. | Ensure all screws are tightened. Place the stand on a level surface. Verify TV weight is within 110 lbs limit. |
| Screws do not fit TV's VESA holes. | Incorrect screw size or type for your TV model. | Refer to your TV's manual for correct VESA screw specifications. The hardware kit includes various sizes; try different ones. Spacers may be needed. |
| Difficulty adjusting height. | Misunderstanding of adjustment mechanism. | Height adjustment requires detaching the TV and repositioning the vertical supports. It is not a quick-release mechanism. |
If you continue to experience issues, please contact Mount-It! Customer Support.
6. Specifications
- Model Number: MI-859
- Brand: Mount-It!
- TV Size Compatibility: 32" to 70" flat screen TVs
- VESA Compatibility: 75x75mm, 100x100mm, 100x150mm, 100x200mm, 150x100mm, 150x150mm, 200x100mm, 200x200mm, 300x200mm, 300x300mm, 400x200mm, 400x300mm, 400x400mm, 600x400mm, 800x400mm
- Weight Capacity: 110 lbs (50 kg)
- Tilt Angle: Fixed 6 degrees
- Height Adjustment: 23.4" to 28.9" (multiple fixed levels)
- Material: Alloy Steel
- Color: Grey
- Item Weight: 6.52 pounds
- Package Dimensions: 17.56 x 5.83 x 1.97 inches
Image: Diagram showing the overall dimensions of the stand, including a base width of 15 inches, a vertical arm height of 16.9 inches, and an adjustable total height range of 23.4 to 28.9 inches.
7. Warranty and Support
Warranty Information
Mount-It! products are designed for durability and performance. For specific warranty details regarding your MI-859 TV stand, please refer to the warranty card included in your product packaging or visit the official Mount-It! website. Keep your proof of purchase for warranty claims.
Customer Support
Our US-based Customer Support Team is available to assist you with any questions, assembly assistance, or troubleshooting. You can reach us via the contact information provided on the Mount-It! website or through your retailer's support channels.
For more information, visit: Mount-It! Official Store
