HIMOX AP01

HIMOX AP01 Air Purifier Replacement Filter User Manual

1. Product Overview

This manual provides essential information for the HIMOX AP01 Air Purifier Replacement Filter. The HIMOX AP01 filter is a genuine H13 True HEPA filter designed for the HIMOX AP01 air purifier, featuring a 3-stage filtration system to ensure clean and healthy air in your home or office.

Key Features:

  • Genuine H13 True HEPA: Captures 99.97% of airborne contaminants as small as 0.1 microns.
  • 3-Stage Filtration System: Includes a Pre-Filter, H13 True HEPA Filter, and High-Efficiency Activated Carbon Filter.
  • 360° Air Intake: Ensures efficient air purification from all directions.
  • Smart Filter Change Reminder: Built-in indicator reminds you when to replace the filter.
  • Aromatherapy-enabled: Allows for the addition of essential oils (purifier feature).
HIMOX AP01 Air Purifier with Replacement Filter

Image 1.1: HIMOX AP01 Air Purifier shown with its replacement filter.

2. Filter Components and Function

The HIMOX AP01 replacement filter utilizes a comprehensive 3-stage filtration system to effectively clean the air:

  1. Pre-Filter: Captures larger airborne particles such as allergens, pet hair, dander, and large dust particles.
  2. H13 True HEPA Filter: Removes 99.97% of airborne contaminants, including smoke, mold, and fine dust, down to 0.1 microns.
  3. High-Efficiency Activated Carbon Filter: Neutralizes odors from pets, cooking, smoke, and harmful volatile organic compounds (VOCs) like formaldehyde and benzene.
Diagram of HIMOX AP01 3-Stage Filter Layers

Image 2.1: Visual representation of the 3-stage filtration system.

3. Installation and Replacement

Follow these steps to install or replace the HIMOX AP01 filter in your air purifier:

  1. Unplug the Air Purifier: Always ensure the device is unplugged from the power outlet before performing any maintenance.
  2. Remove the Base Cover: Turn the air purifier upside down. Locate the lock/unlock indicator on the base cover. Rotate the cover counter-clockwise to unlock it, then lift it off.
  3. Remove the Old Filter: Carefully pull out the used filter from the air purifier. Dispose of the old filter responsibly.
  4. Unpack the New Filter: Remove the new HIMOX AP01 replacement filter from its protective plastic packaging.
  5. Insert the New Filter: Place the new filter into the air purifier, ensuring it sits securely.
  6. Replace the Base Cover: Align the base cover with the air purifier and rotate it clockwise until it locks into place.
  7. Reset Filter Indicator: Plug in the air purifier. Touch and hold the filter replacing icon (usually the power button or a dedicated reset button) for at least 5 seconds until the indicator light turns off or resets. This clears the filter replacement alert.

Video 3.1: This video demonstrates the unboxing and filter installation process for the HIMOX AP01 Air Purifier.

HIMOX AP01 Air Purifier and Filter

Image 3.1: The HIMOX AP01 Air Purifier and its genuine replacement filter.

4. Maintenance and Filter Life

To maintain optimal performance of your HIMOX AP01 Air Purifier, regular filter replacement is crucial. The filter's lifespan depends on usage and air quality.

  • Replacement Frequency: It is recommended to replace your filter every 4-8 months. In environments with higher pollution, pets, or frequent use, replacement may be needed sooner (e.g., every 2-3 months).
  • Filter Change Reminder: The air purifier features a built-in indicator that will alert you when a filter change is due. Remember to reset this indicator after installing a new filter by pressing the designated button for 5 seconds.
Comparison of New vs. Used HIMOX AP01 Filter

Image 4.1: A visual comparison showing a new HIMOX AP01 filter next to one used for three months, highlighting the accumulation of captured particles.

5. Troubleshooting

If you encounter issues related to your HIMOX AP01 replacement filter, consider the following:

  • Filter Not Fitting Properly: Ensure you are using a genuine HIMOX AP01 replacement filter. Unofficial filters may not fit correctly or provide optimal performance. Double-check the alignment when inserting the filter and securing the base cover.
  • Filter Change Indicator Remains On: After installing a new filter, make sure to reset the filter indicator by pressing and holding the appropriate button (refer to Section 3, step 7) for at least 5 seconds.
  • Reduced Airflow or Odors Persist: This may indicate that the filter is heavily soiled and needs replacement, even if the indicator has not yet activated. Consider replacing the filter more frequently in high-pollution environments.
  • Unusual Noise: Ensure the filter is seated correctly and the base cover is securely locked. A loose filter can cause vibrations.

For further assistance, please contact HIMOX customer service.

6. Specifications

FeatureDetail
Model CompatibilityHIMOX AP01 Air Purifier
Filter TypeH13 True HEPA with 3-Stage Filtration
Filtration Efficiency99.97% of particles as small as 0.1 microns
MERV Rating13
MaterialCotton (filter media)
Recommended ReplacementEvery 4-8 months (depending on usage and air quality)
Item Weight13.3 ounces
Package Dimensions7.52 x 5.75 x 5.47 inches

7. Warranty and Support

HIMOX provides customer service in the USA. For any questions, concerns, or warranty claims regarding your HIMOX AP01 Air Purifier Replacement Filter, please contact HIMOX customer support. Using official HIMOX replacement filters ensures product compatibility and maintains your warranty.

Certifications: CARB Certified, FCC Certified, ETL Listed.

© 2023 HIMOX. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.