1. Introduction
The Tesvor S6+ Robot Vacuum Cleaner is designed to provide efficient and intelligent cleaning for your home. Featuring advanced laser navigation, powerful suction, and smart control options, it simplifies floor maintenance for various surfaces including pet hair, carpets, and hard floors.
This manual provides detailed instructions for setting up, operating, and maintaining your Tesvor S6+ to ensure optimal performance and longevity.
2. Setup
2.1 Unpacking and Initial Placement
Carefully remove all components from the packaging. Place the charging dock against a wall in an open area, ensuring there are no obstacles within 1 meter (3 feet) to the front and 0.5 meters (1.5 feet) to the sides. Connect the power adapter to the charging dock and plug it into a power outlet.
2.2 Initial Charging
Place the Tesvor S6+ robot vacuum onto the charging dock. Ensure the charging contacts on the robot align with those on the dock. The indicator lights on the robot will illuminate to show it is charging. For first-time use, fully charge the robot for 4-6 hours.
2.3 Wi-Fi and App Connection
The Tesvor S6+ is compatible with Android and Apple devices. To connect the robot vacuum to your app, ensure your Wi-Fi network is on 2.4GHz. Please update the app to the latest version upon receiving the robot.
- Place the robot and your mobile phone near the Wi-Fi router.
- Confirm that the Wi-Fi SSID for 2.4GHz and 5GHz networks are different. Connect the robot to the 2.4GHz Wi-Fi network.
- Verify that the Wi-Fi password entered is correct.
- If connection issues persist, access your Wi-Fi router's configuration page and perform the following:
- Turn off the "firewall".
- Turn off the "filter MAC address" function.
- Turn off any whitelist/blacklist settings.
- Avoid using Wi-Fi repeaters or signal amplifiers during the initial setup process.
- If all above steps fail, try using another mobile phone to create a Wi-Fi hotspot (2.4GHz) and connect the robot to this hotspot for initial setup.
3. Operating Instructions
3.1 Laser Navigation and Mapping
The Tesvor S6+ utilizes advanced "AI" Laser Navigation technology to accurately detect and map your home's layout. During its first cleaning cycle, the robot will create a detailed map of the room, allowing it to clean systematically and avoid missing areas.
Image: Tesvor S6+ robot vacuum using laser navigation to identify and map the cleaning area in a living room.
3.2 Cleaning Modes and Suction Power
The S6+ offers three adjustable cleaning modes: Quiet, Normal, and Turbo. You can switch between these modes using the dedicated mobile application or the included remote control. The robot features an ultra-strong 2700Pa suction power, effective for pet hair, carpets, and hard floors. Note that noise levels will vary with suction power.
Image: Tesvor S6+ robot vacuum on a carpet, illustrating its powerful 2700Pa suction capability.
3.3 App and Voice Control
Control your Tesvor S6+ remotely via the mobile app (2.4GHz Wi-Fi connection required) or through voice commands using Alexa or Google Home. The app allows for customized cleaning plans, scheduling, and setting no-go zones.
Image: A smartphone displaying the Tesvor S6+ app interface with a room map, alongside a voice assistant device, demonstrating remote control capabilities.
3.4 Automatic Recharging and Resume
When the battery level is low, the robot will automatically return to its charging station. After recharging, it will resume cleaning from where it left off, thanks to its break-point memory function.
Image: The Tesvor S6+ robot vacuum approaching and docking with its charging station for automatic recharging.
3.5 Mopping Function
The Tesvor S6+ supports a mopping function. A water tank accessory (not included in the standard package) is required for mopping. The robot will automatically choose one of three water speed levels depending on the environment.
4. Maintenance
4.1 Dustbin and Filter Cleaning
Regularly empty the 600ml dustbin and clean the triple HEPA filter to maintain optimal suction performance and air quality. Refer to the app or included user guide for specific instructions on removing and cleaning these components.
4.2 Side Brushes and Main Brush
Inspect the side brushes and main brush periodically for tangled hair or debris. Clean them as needed to ensure effective sweeping and prevent damage to the robot.
4.3 Mopping Pad (if applicable)
If using the mopping function, remove and clean the mopping pad after each use. Ensure it is dry before reattaching or storing.
5. Troubleshooting
5.1 Wi-Fi Connection Issues
If you experience difficulty connecting the robot to Wi-Fi or the app, review the Wi-Fi settings in section 2.3. Ensure your router is broadcasting a 2.4GHz signal and that firewall/MAC filtering settings are not interfering. Try restarting both your router and the robot.
5.2 Robot Getting Stuck or Lost
Ensure the cleaning area is free of excessive clutter, loose cables, or small objects that could obstruct the robot's path. The laser navigation system is designed to avoid obstacles, but extreme conditions can cause issues. If the robot frequently gets lost, ensure its charging dock is in an accessible location and that the robot has completed an initial mapping cycle.
5.3 Poor Cleaning Performance
Check the dustbin and filters for fullness or blockages. Clean the main brush and side brushes for tangled hair or debris. Ensure the robot is operating in an appropriate suction mode for the surface being cleaned.
6. Specifications
| Feature | Detail |
|---|---|
| Brand | Tesvor |
| Model Name | S6+ |
| Suction Power | 2700 Pa Max |
| Battery Capacity | 5200mAh |
| Battery Life | Up to 120 minutes (Normal Mode) |
| Navigation Technology | Laser Intellect Navigation |
| Dustbin Capacity | 600 Milliliters |
| Product Dimensions | 13"L x 13"W x 3"H |
| Item Weight | 12.27 pounds |
| Control Method | Remote, App, Voice (Alexa & Google Home) |
| Filter Type | Cartridge |
| Included Components | Battery, Clean Roller Brush, Dust Box, Side Brushes |
| Surface Recommendation | Hard Floor (also suitable for carpets as per product title) |
7. Product Features in Action
7.1 Lidar Robot Vacuum Comparison
Watch this video for a comparison of Lidar robot vacuum features, highlighting the advanced navigation capabilities of the Tesvor S6+.
Video: A comparison video demonstrating the Lidar navigation and features of the Tesvor S6+ robot vacuum.
8. Warranty and Support
For any assistance, warranty claims, or technical support, please contact Tesvor Customer Service at service@tesvor.com. Please have your model number (S6+) and purchase information ready when contacting support.
The product includes OTA (Over-The-Air) service for firmware updates, ensuring your robot vacuum always has the latest features and improvements.
