VASTFIRE VASTFIRE-XHP 70.3

VASTFIRE XHP 70.3 Rechargeable Flashlight Instruction Manual

Model: VASTFIRE-XHP 70.3

Introduction

Thank you for choosing the VASTFIRE XHP 70.3 Rechargeable Flashlight. This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your new device. Please read these instructions thoroughly before use and retain them for future reference.

What's in the Box

  • VASTFIRE XHP 70.3 Flashlight
  • 1 Lithium Polymer Battery (pre-installed, with insulating paper)
  • USB-C Charging Cable
  • Lanyard
Contents of the VASTFIRE XHP 70.3 flashlight package, including the flashlight, battery, USB-C charging cable, and lanyard.
Figure 1: Package Contents. The image displays the VASTFIRE XHP 70.3 flashlight, a blue lithium polymer battery, a white USB-C charging cable, and a green lanyard, laid out on a light-colored surface.
Video 1: Unboxing and Components. This video demonstrates the unboxing of the VASTFIRE XHP 70.3 flashlight, showcasing the included components such as the flashlight body, battery, and charging cable.

Setup

  1. Battery Installation: Unscrew the tail cap of the flashlight. The Lithium Polymer battery is typically pre-installed but may have an insulating paper disc at the negative end for safe shipment. Remove this paper before first use. Ensure the battery is inserted with the positive (+) end facing towards the flashlight head. Screw the tail cap back on securely.
  2. Initial Charge: For optimal performance, fully charge the flashlight before its first use. Open the rubber cover on the side of the flashlight to reveal the USB-C charging port. Connect the provided USB-C cable to the flashlight and a compatible USB power source. The blue indicator lights will illuminate and blink during charging, and all four lights will be solid when fully charged.
Close-up of the VASTFIRE XHP 70.3 flashlight showing the battery compartment and battery insertion.
Figure 2: Battery Installation. The image illustrates the process of inserting the blue lithium polymer battery into the flashlight, emphasizing the correct orientation and the removal of any insulating material.

Operating Instructions

Main Light Operation

  • Power On/Off: Press the power button once to turn on the main light. Press again to cycle through modes.
  • Main Light Modes: The main light features three modes: High-beam (5000 lumens), Low-beam (3000 lumens), and Strobe. Press the power button repeatedly to cycle through these modes.
  • Zoom Function: The flashlight features a zoomable convex lens. Extend or retract the head of the flashlight to adjust the beam from a wide floodlight for broad coverage to a focused spot beam for long-range illumination.
VASTFIRE XHP 70.3 flashlight demonstrating three main lighting modes: High, Medium, and Strobe, illuminating a dark outdoor area.
Figure 3: Main Light Modes. This image shows the flashlight's main beam in High, Medium, and Strobe settings, highlighting its versatility for different lighting needs.
Video 2: Flashlight Beam and Zoom Demonstration. This video illustrates the powerful beam of the VASTFIRE flashlight, demonstrating its ability to switch between a wide floodlight and a focused spot beam, illuminating distant objects.

COB Side Light Operation

  • Activate Side Light: Quickly double-click the power button to activate the COB side light.
  • Side Light Modes: The COB side light offers multiple modes: Bright White, Dim White, Constant Red, and Flashing Red. Press the power button repeatedly after activating the side light to cycle through these modes. The red light modes are useful as warning lights or for preserving night vision.
VASTFIRE XHP 70.3 flashlight showing its COB side light in various modes, including white light for reading and red flashing light for signaling.
Figure 4: COB Side Light Functionality. This image demonstrates the COB side light's different settings, including bright white for general illumination and red light for signaling or preserving night vision.
Video 3: VASTFIRE EDC Flashlight Features. This video highlights the everyday carry (EDC) aspects of the VASTFIRE flashlight, including its various light modes, side COB light, and power bank function.

Power Bank Function

  • Charging External Devices: The flashlight features a USB-A output port, allowing it to function as a power bank. Open the rubber cover and connect your device's charging cable to the USB-A port to charge your phone or other small electronic devices in an emergency.
  • Battery Indicator: Four blue LED lights beside the power button indicate the battery power level and low-voltage status. All four lights will be solid when fully recharged.
VASTFIRE XHP 70.3 flashlight being used as a power bank to charge a smartphone, illustrating its USB output port.
Figure 5: Power Bank Feature. The image shows the flashlight charging a smartphone via its USB-A output port, demonstrating its dual functionality.

Maintenance

  • Cleaning: Regularly clean the flashlight body with a soft, damp cloth. Keep the lens free of dust and debris for optimal light output.
  • Water Resistance: The flashlight has an IPX4 splashproof rating, meaning it is protected against splashing water from any direction. It is suitable for use in rainy or snowy conditions but should not be submerged in water.
  • Battery Care: Store the flashlight with a partial charge if not used for extended periods. Avoid fully discharging the battery frequently to prolong its lifespan.

Troubleshooting

  • Flashlight not turning on or charging: Ensure the insulating paper from the negative end of the battery has been removed. This is a common reason for initial non-functionality.
  • Flashlight getting hot: It is normal for high-power flashlights to generate heat quickly during operation. This is not a quality problem.
  • Side light not activating: Ensure you are performing a quick double-click of the power button to activate the side light.

Specifications

Model NumberVASTFIRE-XHP 70.3
BrandVASTFIRE
MaterialAircraft Grade Aluminum
Light Source TypeLED (XHP 70.3)
Brightness (Main Light)5000 Lumens
Beam DistanceUp to 650 feet
Battery Type1 Lithium Polymer battery required (5000mAh)
Charging TimeApprox. 8 hours for full charge
Runtime (Brightest Setting)Approx. 4.5 hours
Water Resistance LevelIPX4 (Splashproof)
Special FeaturesAdjustable Focus, Multiple Light Modes (Main & COB Side), Power Bank Function, Impact Resistant, Non-Slip Grip
Product Dimensions3"D x 3"W x 12"H
Item Weight0.5 Pounds (8 ounces)

Warranty & Support

VASTFIRE stands behind its products. This flashlight comes with an 18-month warranty and a 60-day return policy. For any questions, concerns, or support needs, please contact VASTFIRE customer service. Our friendly and easy-to-reach support team is ready to assist you.

Contact information can typically be found on the product packaging or the retailer's website where the product was purchased.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.