Intex 26729EH
INTEX 26729EH Prism Frame Clearview Above Ground Swimming Pool User Manual
Model: 26729EH | Brand: Intex
Introduction
This manual provides essential information for the safe and efficient setup, operation, maintenance, and troubleshooting of your INTEX 26729EH 16ft x 48in Prism Frame Clearview Above Ground Swimming Pool Set. Please read all instructions carefully before assembly and use.
Important Safety Information
Always supervise children. Drowning hazard exists. Ensure proper fencing and safety barriers are in place. Never dive into this pool. Always follow local regulations regarding pool installation and safety.
Proposition 65 Warning: This product can expose you to chemicals which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Package Contents
Verify all components are present before beginning assembly.
Image: Complete INTEX 26729EH Prism Frame Clearview Pool Set, including the pool, filter pump, ladder, ground cloth, and pool cover.
Image: Detailed view of included accessories: Krystal Clear™ Cartridge Filter Pump, Removable Ladder, Pool Cover, and Ground Cover.
- Pool Liner (Puncture-resistant 3-Ply PVC material)
- Powder-Coated Steel Tubing Frame
- Innovative Composite T-Joints
- Krystal Clear™ Cartridge Filter Pump (1500 GPH) with Hydro Aeration Technology
- Removable Ladder (Max weight capacity: 300 lbs.)
- Ground Cloth (16 ½ ft. square)
- Pool Cover with rope tie
- Repair Patch
Setup and Assembly
The INTEX Prism Frame Clearview Pool is designed for quick and easy assembly, typically ready for water in about 45 minutes. Proper site preparation is crucial for stability and longevity.
1. Site Preparation
Select a firm, level area free of debris, rocks, or sharp objects. The ground must be completely level to ensure proper water distribution and structural integrity. Uneven ground can lead to pool collapse and serious injury.
Image: Pool dimensions and water capacity. The pool is 16 feet in diameter and 48 inches high, with a water capacity of 5,061 gallons and a water depth of 42 inches.
2. Ground Cloth Placement
Spread the included ground cloth over the prepared level area. This provides an additional layer of protection for the pool liner.
Image: Illustration showing the ground cover laid out before pool assembly, providing a protective base.
3. Pool Liner and Frame Assembly
Unfold the pool liner on top of the ground cloth. Assemble the powder-coated steel tubing frame by connecting the innovative composite T-Joints. These joints are engineered for high strength and tool-free setup.
Image: Close-up of the innovative composite T-Joint, highlighting its design for strength and easy assembly.
Image: Diagram illustrating the oversized metal tubes used in the frame, which provide 21% more anti-bending strength.
The pool features a puncture-resistant 3-Ply PVC material for durability. In case of minor damage, a repair patch is included.
Image: Cross-section view of the 3-Ply Side Wall Liner, showing its reinforced all-around band, high-strength polyester mesh, and extra-thick PVC layer for durability.
4. Filling the Pool
Once the frame is fully assembled and the liner is smooth, begin filling the pool with water. As the water level rises, ensure the liner is settling correctly and smooth out any wrinkles from the center outwards.
Video: "Clearview Prism Frame" - This video demonstrates the assembly process and highlights the clear view window feature of the pool. It shows the pool being set up and filled with water, emphasizing the ease of installation and the unique transparent section of the pool wall.
5. Ladder Installation
Assemble and install the removable ladder according to the instructions. Ensure it is securely placed and stable before use. The ladder has slip-resistant steps and a coated corrosion-resistant steel frame.
Image: A removable ladder designed for easy access to the pool, featuring slip-resistant steps and a durable frame.
Operating Your Pool
Filter Pump Operation
The included Krystal Clear™ Cartridge Filter Pump (1500 GPH) is essential for maintaining water clarity. It incorporates Hydro Aeration Technology for improved circulation, filtration, and increased negative ions.
Image: The Krystal Clear Cartridge Filter Pump C1500, highlighting its 1500 GPH flow rate and Hydro Aeration Technology for enhanced water quality.
Image: Visual representation of Hydro Aeration Technology, showing air bubbles being injected into the pool water for improved circulation and clarity.
- Connect the pump to the pool according to the pump manual.
- Ensure the filter cartridge is clean and properly installed.
- Operate the pump for 2-12 hours daily, depending on usage and water conditions, to maintain optimal filtration.
- The pump is equipped with an energy-saving timer built into the GFCI.
Water Chemistry
Regular testing and balancing of pool water chemistry are vital for swimmer safety and pool longevity. Consult a local pool supply store for recommended chemicals and testing kits.
Clear View Window
The unique 360-degree clear view panoramic window allows for an immersive underwater experience. Keep the window clean for best visibility.
Image: Two children wearing goggles looking through the clear view window of the pool from underwater, smiling.
Maintenance
Filter Cartridge Cleaning and Replacement
- Turn off and unplug the filter pump before cleaning.
- Remove the filter cartridge and rinse it thoroughly with a garden hose.
- Replace the cartridge every 2-3 weeks, or more frequently depending on pool usage and water conditions.
Pool Cleaning
- Regularly skim debris from the water surface using a pool net.
- Vacuum the pool bottom as needed to remove settled dirt and debris.
- Brush the pool walls to prevent algae buildup.
Winterization and Storage
Before winter, completely drain the pool. Clean and dry all components thoroughly. Store the liner, frame, pump, and accessories in a dry, protected area to prevent damage and extend product life.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Cloudy Water | Insufficient filtration, improper chemical balance, high organic load. | Run filter pump longer, clean/replace filter cartridge, test and adjust water chemistry (chlorine, pH), shock treat pool. |
| Algae Growth | Low chlorine, high pH, poor circulation. | Shock treat with algaecide, brush pool walls, ensure proper filtration. |
| Pump Not Running | Power supply issue, clogged impeller, GFCI tripped. | Check power connection, reset GFCI, clean impeller, consult pump manual. |
| Water Leakage | Puncture in liner, loose hose connections. | Locate and repair puncture with included patch, tighten all hose clamps. |
Specifications
- Brand: Intex
- Model Number: 26729EH
- Product Dimensions: 192"L x 192"W x 48"H (16 ft diameter x 48 in height)
- Water Capacity (90%): 5,061 gallons (19,158 Liters)
- Water Depth: 42 inches (107 cm)
- Material: Polyvinyl Chloride (PVC), Alloy Steel
- Color: Gray
- Item Weight: 158.1 Pounds
- Filter Pump Flow Rate: 1500 GPH (5,678 L/hr)
- System Flow Rate: 1,180 GPH (4,466 L/hr)
- Special Feature: Hydro Aeration Technology filter pump, 360-degree clear view panoramic window, innovative T-joints, strong powder coated metal frames, and durable 3-ply material liner
- Assembly Required: Yes
- Indoor/Outdoor Usage: Outdoor
- UPC: 078257267293
Warranty Information
The product typically comes with a manufacturer's warranty. Please refer to the warranty card included in your product packaging for specific terms, conditions, and duration. Keep your proof of purchase for warranty claims.
Customer Support
For further assistance, missing parts, or technical support, please contact Intex customer service. Visit the official Intex website for contact details and FAQs.
You can also visit the Intex Store on Amazon for more product information and support resources.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.