BAKAJI Madia Cabinet User Manual

Introduction

This manual provides essential information for the safe and efficient assembly, operation, and maintenance of your BAKAJI Madia Cabinet. Please read these instructions carefully before beginning assembly or use, and retain them for future reference. The BAKAJI Madia Cabinet is a versatile storage unit designed for various indoor spaces such as kitchens, bathrooms, or offices, featuring two drawers and two doors with internal shelving.

Setup and Assembly

Assembly of the BAKAJI Madia Cabinet is required. Ensure you have all components and tools before starting. A Phillips head screwdriver and a hammer (for dowels and back panel nails) are typically needed.

Package Contents:

• MDF wood panels (sides, top, bottom, back, shelves, drawer fronts)
• Hardware pack (screws, dowels, cam locks, hinges, drawer slides, handles)
• Assembly instructions sheet (refer to this manual)

Assembly Steps:

1. Unpack and Identify Parts: Carefully remove all components from the packaging. Lay them out on a clean, soft surface to prevent scratches. Compare all parts against the provided parts list to ensure nothing is missing.
2. Assemble the Main Frame: Attach the side panels to the bottom panel using dowels and cam locks/screws as indicated in the assembly diagram. Ensure all connections are secure and flush.
3. Install Internal Shelves: Insert the fixed and adjustable shelves into their designated slots or attach them with support pins and screws.
4. Attach the Top Panel: Secure the top panel to the assembled frame using the appropriate hardware.
5. Install Drawer Slides: Attach the drawer slides to the cabinet interior and to the drawer boxes according to the instructions. Ensure they are level and aligned for smooth operation.
6. Assemble Drawers: Construct the drawer boxes, then attach the drawer fronts. Insert the assembled drawers into the cabinet.
7. Install Doors: Attach the hinges to the doors and then to the cabinet frame. Adjust hinges as necessary to ensure doors are level and close properly.
8. Attach Handles: Secure the handles to the drawer fronts and cabinet doors.
9. Attach Back Panel: Carefully align and attach the back panel using small nails or screws. This adds stability to the cabinet.

Safety Note: Always assemble furniture on a soft, clean surface to prevent damage. Ensure all screws and fasteners are tightened securely. Do not overtighten. If any parts are missing or damaged, do not proceed with assembly; contact customer support.

Operating Instructions

The BAKAJI Madia Cabinet is designed for convenient storage in various rooms.

Using the Drawers:

• Gently pull the handles to open the drawers.
• Push firmly but smoothly to close the drawers completely.
• Avoid overloading drawers to ensure smooth operation and prevent damage to the slides.

Using the Doors and Shelves:

• Pull the handles to open the cabinet doors.
• Push the doors until they click into place to ensure they are fully closed.
• The internal shelves can be used to organize items such as tableware, cosmetics, or documents.
• Distribute weight evenly on shelves to maintain stability.

Maintenance and Care

Proper care will extend the life and appearance of your BAKAJI Madia Cabinet.

• Cleaning: Wipe the cabinet surfaces with a dry, soft cloth. For stubborn marks, a slightly damp cloth followed immediately by a dry cloth can be used. Avoid abrasive cleaners, harsh chemicals, or excessive moisture, as these can damage the lacquered finish and engineered wood.
• Hardware Check: Periodically check all screws, cam locks, and other fasteners to ensure they remain tight. Retighten if necessary to maintain stability.
• Avoid Direct Sunlight and Heat: Prolonged exposure to direct sunlight or extreme heat can cause discoloration or warping of the wood.
• Spills: Clean up spills immediately to prevent moisture absorption and damage to the finish.

Troubleshooting

Here are solutions to common issues you might encounter:

• Cabinet is Wobbly:
  Solution: Ensure all assembly screws and cam locks are fully tightened. Check that the cabinet is placed on a level surface. If necessary, use furniture levelers or shims under the feet.
• Drawers Do Not Slide Smoothly:
  Solution: Verify that the drawer slides are correctly installed and aligned on both the drawer box and the cabinet frame. Ensure no objects are obstructing the slides. Lightly lubricate the slides with a silicone-based lubricant if needed.
• Doors Do Not Close Properly or Are Uneven:
  Solution: Adjust the hinges. Most furniture hinges have adjustment screws that allow for vertical, horizontal, and depth alignment. Refer to the hinge manufacturer's instructions or a general guide for hinge adjustment. Ensure the cabinet is level.
• Scratches or Minor Damage:
  Solution: For minor scratches, a furniture repair pen or wax stick in a matching color can be used. For more significant damage, consider contacting a professional furniture repair service.

Specifications

Warranty Information

Specific warranty details for the BAKAJI Madia Cabinet are not provided in this manual. For information regarding product warranty, please refer to the documentation included with your purchase or contact the retailer from whom you purchased the product. Keep your proof of purchase for any warranty claims.

Customer Support

If you encounter any issues not covered in the troubleshooting section, or require further assistance with your BAKAJI Madia Cabinet, please contact the retailer or the manufacturer's customer service department. Have your product model and purchase details ready when contacting support.