ELEGANT Double Sliding Shower Door (60" W x 72" H, Black)

1. Safety Information

Please read all instructions carefully before installation and use. Failure to follow these instructions could result in injury or product damage.

• Always wear safety glasses during installation.
• Handle glass panels with extreme care. Tempered glass is strong but can shatter if struck at the edges.
• Ensure the installation surface is structurally sound and level.
• Professional installation is recommended for optimal safety and performance.
• Keep small children and pets away from the installation area.

2. Product Overview

The ELEGANT Double Sliding Shower Door is designed for modern bathrooms, offering a semi-frameless bypass design for smooth operation and a sleek aesthetic. This model features 1/4" (6mm) clear tempered glass and durable black hardware.

Key Features:

• Double Sliding Bypass Design: Allows both glass panels to slide smoothly, providing flexible entry and exit.
• Adjustable Width: The shower door offers a width adjustment range of 58.5 inches to 60 inches by cutting the guide rail, accommodating various shower openings.
• Durable Hardware: Features black aluminum alloy hardware designed to resist rust and corrosion.
• Humanized Handle Design: Includes one long handle on the exterior and two inner knobs for convenient sliding and use as a towel rack.
• Safety Tempered Glass: 1/4" (6mm) clear tempered glass is certified by ANSI, ensuring safety and durability.
• Easy Installation: Can be installed for left or right-hand opening. All necessary fixings and an illustrated instruction guide are included.

Figure 2.1: ELEGANT Double Sliding Shower Door (60" W x 72" H, Black) installed in a bathroom.

3. Installation Instructions

This section provides a general overview of the installation process. Refer to the detailed illustrated guide included with your product for specific step-by-step instructions. Professional installation is highly recommended.

3.1 Pre-Installation Checklist

• Verify all parts are present and undamaged.
• Ensure the shower opening dimensions are within the product's adjustable range (58.5 in. to 60 in. width).
• Gather necessary tools (e.g., drill, level, measuring tape, silicone sealant).
• Confirm walls are plumb and the shower base is level.

3.2 General Installation Steps

1. Prepare the Opening: Measure the width of your shower opening. If necessary, cut the top and bottom guide rails to fit the exact dimensions.
2. Install Wall Profiles: Secure the vertical wall profiles to the shower walls using appropriate fasteners. Ensure they are plumb.
3. Attach Top and Bottom Tracks: Connect the top and bottom tracks to the wall profiles.
4. Install Rollers and Handles: Attach the rollers to the top edge of the glass panels and the handles/knobs to the designated holes.
5. Mount Glass Panels: Carefully lift and place the glass panels onto the bottom track and into the top rollers. Adjust as needed for smooth sliding.
6. Seal and Finish: Apply silicone sealant to all exterior joints to prevent water leakage. Allow adequate drying time before use.

Figure 3.2: Detail of the 1.5-inch width adjustment feature.

4. Operation

The ELEGANT Double Sliding Shower Door is designed for smooth and effortless operation.

• Sliding the Doors: Gently push or pull the glass panels using the handles or knobs to open and close the shower enclosure. The built-in copper rollers ensure a quiet and smooth glide.
• Handle Functionality: The long exterior handle can also serve as a convenient towel rack.

Figure 4.2: Aluminum alloy handle, designed for both operation and towel hanging.

Figure 4.3: Interior knob for convenient door operation.

5. Maintenance and Care

Proper care will ensure the longevity and appearance of your shower door.

• Glass Cleaning: Clean glass panels regularly with a soft cloth and a non-abrasive glass cleaner. Avoid harsh chemicals or abrasive pads that can scratch the glass or damage protective coatings.
• Hardware Cleaning: Wipe down aluminum hardware with a soft, damp cloth. For stubborn spots, use a mild, non-abrasive cleaner. Do not use acidic or abrasive cleaners, as they can damage the finish.
• Track Maintenance: Keep the top and bottom tracks free of soap scum, hair, and debris to ensure smooth sliding. Periodically clean the tracks with a small brush or vacuum.
• Sealant Inspection: Periodically inspect the silicone sealant around the enclosure for any signs of wear or damage. Reapply sealant if necessary to prevent leaks.

Figure 5.1: Illustration of the shower's wet and dry zones, emphasizing proper sealing for water retention.

6. Troubleshooting

If you encounter any issues with your shower door, refer to the following common solutions:

• Doors not sliding smoothly: Check the top and bottom tracks for debris or obstructions. Clean the tracks thoroughly. Inspect rollers for damage or misalignment; adjust or replace if necessary.
• Water leakage: Inspect all silicone sealant lines for gaps or cracks. Reapply sealant where needed. Ensure the bottom track is properly installed and sealed.
• Glass appears loose: Check all hardware connections, especially where the glass panels are clamped. Tighten screws if they are loose, but do not overtighten.
• Door does not close completely: Verify that the wall profiles are plumb and the tracks are level. Adjust the width if the opening is not perfectly square.

If problems persist, contact ELEGANT customer support for assistance.

7. Specifications

8. Warranty and Support

For warranty information, technical support, or to order replacement parts, please contact ELEGANT customer service. Refer to your purchase documentation for specific warranty terms and contact details.

You can also visit the official ELEGANT store for more information: ELEGANT Store on Amazon