1. Introduction
Thank you for choosing the RICOO S7411 Monitor Wall Mount. This manual provides essential information for the safe and correct installation, operation, and maintenance of your new wall mount. Please read these instructions thoroughly before beginning installation and retain them for future reference. This mount is designed to securely hold monitors and TVs ranging from 13 to 27 inches (33-69 cm) with VESA 75x75 or 100x100 mounting patterns and a maximum weight of 20 kg.
2. Safety Information
- Weight Capacity: Do not exceed the maximum load capacity of 20 kg (44 lbs). Overloading can result in serious injury or damage to equipment.
- Screen Size: Ensure your screen's diagonal measurement is within the recommended range of 13-27 inches (33-69 cm).
- VESA Compatibility: Verify that your monitor or TV has VESA mounting patterns of 75x75 mm or 100x100 mm.
- Wall Type: The included wall plugs are suitable for concrete walls only. For other wall types (e.g., wood studs, drywall), consult a professional or use appropriate mounting hardware (not included).
- Installation: Improper installation may cause property damage or personal injury. If you are unsure about the installation process, seek professional assistance.
- Moving Parts: Be cautious when adjusting the mount to avoid pinching fingers or other body parts.
- Children: Keep small parts and packaging materials away from children, as they may pose a choking hazard.
3. Package Contents
Before installation, please check that all components are present and undamaged. If any parts are missing or defective, contact RICOO customer support.
- Pre-assembled Monitor Bracket
- Wall Plugs (for concrete walls only)
- Screen Mounting Screws
- Wall Mounting Screws
- Additional Accessories (e.g., washers, spacers)
Figure 3.1: Technical diagram showing the components and dimensions of the S7411 mount.
4. Specifications
| Model | S7411 |
| Brand | RICOO |
| Compatible Screen Sizes | 13 - 27 inches (33 - 69 cm) |
| VESA Compatibility | 75x75 mm, 100x100 mm |
| Maximum Load Capacity | 20 kg (44 lbs) |
| Swivel Range | +/- 90 degrees |
| Tilt Range | -3 to -10 degrees |
| Wall Distance Adjustment | 44 - 192 mm |
| Front Panel Rotation | +/- 3 degrees |
| Material | Alloy Steel |
| Mounting Type | Wall Mount |
| Product Dimensions | 19 x 12 x 14 cm |
| Product Weight | 650 g |
Figure 4.1: VESA compatibility and screen size range.
Figure 4.2: The mount supports a maximum weight of 20 kg.
5. Setup (Installation)
Follow these steps carefully to install your RICOO S7411 Monitor Wall Mount.
- Pre-Installation Check:
- Ensure your wall can support the combined weight of the mount and your monitor (up to 20 kg).
- Confirm your monitor's VESA pattern is 75x75 mm or 100x100 mm.
- Gather necessary tools: drill, level, screwdriver, pencil.
- Mounting the Wall Plate:
- Choose a suitable location on your wall. Use a level to mark the drilling points for the wall plate.
- Drill pilot holes at the marked locations. For concrete walls, insert the provided wall plugs. For other wall types, use appropriate anchors (not included).
- Secure the wall plate to the wall using the wall screws. Ensure it is firmly attached and level.
Figure 5.1: Securing the wall plate.
- Attaching the VESA Plate to the Monitor:
- Carefully place your monitor face down on a soft, clean surface.
- Align the VESA plate of the mount with the mounting holes on the back of your monitor.
- Use the appropriate screen mounting screws and washers/spacers (if needed) to secure the VESA plate to the monitor. Do not overtighten.
Figure 5.2: Attaching the VESA plate to the monitor.
- Mounting the Monitor to the Wall Arm:
- With assistance, carefully lift the monitor with the attached VESA plate.
- Hook the VESA plate onto the arm of the wall mount.
- Secure the monitor to the arm using the provided locking mechanism or screws, as indicated in the detailed diagram. Ensure it is securely fastened.
Figure 5.3: Final assembly of monitor to wall arm.
6. Operating (Adjustments)
The RICOO S7411 mount offers flexible adjustments for optimal viewing comfort.
- Swivel Adjustment: The monitor can be swiveled up to +/- 90 degrees horizontally. Gently push or pull the monitor to the desired angle.
- Tilt Adjustment: The screen can be tilted from -3 to -10 degrees vertically. Loosen the tilt adjustment screws slightly, adjust the screen to your preferred tilt, and then retighten the screws to secure the position.
- Wall Distance Adjustment: The mount allows you to adjust the distance of your monitor from the wall between 44 mm and 192 mm. Extend or retract the arm to achieve the desired distance.
- Front Panel Rotation: The front panel can be rotated +/- 3 degrees to ensure your screen is perfectly level after installation. Loosen the rotation screw, adjust, and retighten.
Figure 6.1: Horizontal swivel adjustment.
Figure 6.2: Vertical tilt adjustment.
Figure 6.3: Adjustable wall distance.
7. Maintenance
Regular maintenance ensures the longevity and safe operation of your wall mount.
- Cleaning: Wipe the mount with a soft, dry cloth. Avoid using abrasive cleaners or solvents, as they may damage the finish.
- Periodic Inspection: Periodically check all screws and connections to ensure they are tight and secure. Over time, vibrations or adjustments may cause screws to loosen.
- Lubrication: No lubrication is typically required for the moving parts. If movement becomes stiff, ensure no debris is obstructing the joints.
8. Troubleshooting
If you encounter any issues with your RICOO S7411 Monitor Wall Mount, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Monitor is not level | Wall plate or VESA plate not perfectly level; front panel rotation needs adjustment. | Adjust the front panel rotation (+/- 3 degrees) as described in Section 6. If the issue persists, re-check the wall plate installation with a level. |
| Difficulty adjusting swivel/tilt | Screws too tight; debris in joints. | Ensure adjustment screws are not overtightened. Loosen slightly if necessary. Check for any obstructions in the moving parts. |
| Mount feels unstable | Loose screws; incorrect wall anchors; overloaded mount. | Check all mounting screws (wall and monitor) and tighten them securely. Verify that the wall anchors are appropriate for your wall type. Ensure the monitor weight does not exceed 20 kg. |
| Monitor does not fit | Incorrect VESA pattern or screen size. | Confirm your monitor's VESA pattern is 75x75 mm or 100x100 mm and its size is between 13-27 inches. |
9. Warranty and Support
The RICOO S7411 Monitor Wall Mount comes with a 24-month legal warranty for new products, covering manufacturing defects and material faults.
For any questions regarding our products, installation, or warranty claims, please do not hesitate to contact our customer support team. We are happy to assist you.
Email: support@ricoo.de
