Introduction
Thank you for choosing the Relaxdays Floor Lamp. This manual provides essential information for the safe and correct assembly, operation, and maintenance of your new lamp. Please read these instructions carefully before use and retain them for future reference.
Image: The Relaxdays Floor Lamp with its old rose textile shade, showcasing its elegant design.
Safety Instructions
- Ensure the lamp is unplugged from the power outlet before assembly, cleaning, or bulb replacement.
- Do not exceed the maximum wattage specified for the bulb (60W).
- Keep the lamp away from water and moisture. Do not use in damp environments.
- Place the lamp on a stable, level surface to prevent tipping.
- Do not cover the lamp shade with flammable materials.
- If the power cord is damaged, it must be replaced by a qualified electrician to avoid hazards.
Package Contents
Please check that all parts are present before beginning assembly:
- Lamp Base (1x)
- Lamp Pole Sections (multiple, to be screwed together)
- Bulb Socket Assembly (1x)
- Textile Lamp Shade (1x, typically requires assembly)
- Power Cord with Foot Switch (1x)
- User Manual (this document)
Setup and Assembly
Follow these steps to assemble your floor lamp:
- Unpack Components: Carefully remove all parts from the packaging and lay them out on a clean, soft surface to prevent scratches.
- Assemble the Lamp Pole: Screw the individual pole sections together clockwise until they are securely tightened. Ensure the power cable runs freely through the pole.
- Attach to Base: Screw the assembled lamp pole into the lamp base clockwise until firm.
- Attach Bulb Socket: Connect the bulb socket assembly to the top of the lamp pole. Ensure the wiring is not pinched.
- Assemble the Lamp Shade: The textile shade typically comes flat-packed. Attach the fabric shade to the metal rings using the integrated Velcro strips. Then, secure the assembled shade to the bulb socket assembly.
Image: Close-up of the stable chrome-plated metal base.
Image: View of the E27 bulb socket, ready for bulb installation.
Image: Detailed texture of the old rose textile shade material.
Operating Instructions
Installing the Bulb
Ensure the lamp is unplugged. Screw an E27 bulb (max. 60W) into the socket clockwise until it is secure. Do not overtighten.
Turning the Lamp On/Off
Plug the power cord into a suitable electrical outlet. Use the integrated foot switch on the power cord to turn the lamp on or off by pressing it with your foot.
Image: The foot switch and standard European power plug for convenient operation.
Maintenance
Cleaning the Lamp
- Always unplug the lamp before cleaning.
- For the metal base and pole, wipe with a soft, dry cloth. Do not use abrasive cleaners or solvents.
- For the textile shade, gently dust with a soft brush or a lint roller. Spot clean small marks with a slightly damp cloth and mild detergent, then air dry completely.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Lamp does not turn on |
|
|
| Lamp flickers |
|
|
Specifications
Image: Technical drawing illustrating the lamp's dimensions.
| Feature | Detail |
|---|---|
| Brand | Relaxdays |
| Model Number | 10034481_51 |
| Color | Old Rose |
| Product Dimensions | 40 x 40 x 148.5 cm (Length x Width x Height) |
| Product Weight | 3.13 kg |
| Max. Wattage | 60 Watts |
| Shade Material | Cotton Textile |
| Base Material | Metal (Chrome-plated) |
| Bulb Base | E27 |
| Switch Type | Foot Control |
Warranty and Support
Relaxdays products are designed for quality and durability. For information regarding warranty terms, please refer to the purchase documentation or contact your retailer. For technical support or inquiries, please visit the official Relaxdays website or contact their customer service department.
Relaxdays Contact Information:
- Website: www.relaxdays.de (Please check for local country-specific websites)
- Customer Service: Refer to the contact section on the Relaxdays website for phone numbers or email support.
