Introduction
This manual provides essential information for the safe and efficient operation of your Yorkville YXL10P powered loudspeaker. The YXL10P is a versatile 10-inch, 1000-watt (peak) loudspeaker designed for various audio applications, featuring a durable polypropylene cabinet and multiple input options including Bluetooth connectivity. It can be used as a main speaker or a floor monitor.
Features
- Power Output: 1000 Watts Peak / 500 Watts Program
- Woofer: 10-inch with 2-inch Audio Coil
- Compression Driver: 1-inch
- HF Dispersion: 90° x 60°
- Mixer: 3-Channel with Master Level Control
- Connectivity: Integrated Bluetooth
- Construction: Durable Polypropylene Cabinet
- Versatility: Floor Standing or Monitor Wedge Placement
Setup
Unpacking
Carefully remove the loudspeaker from its packaging. Inspect the unit for any signs of damage that may have occurred during transit. It is recommended to retain the original packaging for future transport or if service is required.
Placement
The YXL10P offers flexible placement options:
- Floor Standing: Position the speaker on a stable, flat surface or mount it on a compatible speaker stand. Ensure any stand used is rated to safely support the speaker's weight (approximately 14.13 kg / 31.1 lbs).
- Monitor Wedge: The cabinet is designed with an angled side, allowing it to be placed on the floor for use as a stage monitor, directing sound towards performers.

Image: The Yorkville YXL10P loudspeaker configured as a floor monitor, showing its angled design.
Connections
- Power: Connect the provided AC power cord to the power input on the rear panel of the loudspeaker, then plug it into a suitable electrical outlet.
- Audio Inputs: The YXL10P features multiple input channels. Connect your audio sources, such as a mixer, microphone, or instrument, to the appropriate XLR or 1/4-inch input jacks on the rear panel.
- Bluetooth: For wireless audio streaming, refer to the "Operating - Bluetooth Pairing" section for detailed instructions.
- Link Output: Utilize the LINK output to connect to another YXL10P speaker or other compatible audio equipment, allowing for expansion of your sound system.

Image: Detailed view of the YXL10P's rear control panel, highlighting various input/output ports and control knobs.
Operating
Power On/Off
Locate the power switch on the rear panel of the loudspeaker. Flip the switch to the "ON" position to power on the unit. The power indicator LED will illuminate. Always ensure all audio sources are connected and their levels are set appropriately before powering on the speaker. Power off the speaker before disconnecting any cables.
Controls
- Channel Level Controls: Adjust the individual volume for each of the three input channels to balance your audio sources.
- Master Level Control: This knob controls the overall output volume of the loudspeaker. Adjust it to achieve the desired sound level for your environment.
Bluetooth Pairing
To connect a Bluetooth audio source:
- Ensure Bluetooth is enabled on your source device (e.g., smartphone, tablet, laptop).
- On the YXL10P rear panel, activate Bluetooth pairing mode. This is typically indicated by a flashing Bluetooth LED.
- On your source device, search for available Bluetooth devices and select "Yorkville YXL10P" from the list.
- Once successfully paired, the Bluetooth indicator LED on the speaker will become solid. You can now stream audio wirelessly.
Audio Input Modes
The YXL10P supports various audio input methods, including wired connections via XLR and 1/4-inch jacks, and wireless streaming via Bluetooth. Select the appropriate input based on your audio source and adjust the channel and master levels accordingly.
Maintenance
Cleaning
Clean the loudspeaker cabinet with a soft, dry cloth. Avoid using abrasive cleaners, solvents, or excessive moisture, as these can damage the finish or internal components.
Storage
Store the YXL10P in a dry environment, away from extreme temperatures, humidity, and direct sunlight. Prolonged exposure to harsh conditions can affect the speaker's performance and lifespan.
Transportation
When transporting the loudspeaker, use appropriate protective covers or cases to prevent physical damage from impacts or scratches.
Troubleshooting
No Sound Output
- Verify that the power cord is securely connected and the speaker is turned on. Check the power indicator LED.
- Ensure your audio source device is connected correctly and is functioning properly.
- Confirm that all volume controls (individual channel levels and master level) on the speaker are not set to minimum.
- If using Bluetooth, ensure the device is properly paired and audio is playing.
Distorted Sound
- Reduce the input level from your audio source device.
- Lower the individual channel volume or the master volume on the YXL10P.
- Check all audio cables for secure connections and signs of damage. Replace faulty cables if necessary.
Bluetooth Connection Issues
- Ensure the YXL10P is in Bluetooth pairing mode (flashing LED).
- Move your source device closer to the speaker to improve signal strength.
- Try disconnecting and then re-pairing your device.
- Ensure no other devices are actively connected to the speaker via Bluetooth, as it typically supports one connection at a time.
Specifications
| Model | YXL10P |
| Power Output | 1000 Watts (Peak) / 500 Watts (Program) |
| Woofer | 10-inch with 2-inch Voice Coil |
| Tweeter/Compression Driver | 1-inch |
| HF Dispersion | 90° x 60° |
| Material | Polypropylene |
| Connectivity | Bluetooth, XLR, 1/4-inch |
| Channels | 3 Input Channels + Master |
| Weight | 14.13 kg (31.1 lbs) |
| Package Dimensions | 23.6 x 16.1 x 14.1 inches |
| Power Source | Corded Electric |
| Wireless Range | 10 Meters (Bluetooth) |
| Included Components | Wedge Stand |
| Waterproof | No |
Warranty and Support
Warranty
The Yorkville YXL10P loudspeaker typically comes with a limited warranty. For detailed information regarding the specific terms, conditions, and duration of your warranty, please refer to the official Yorkville website or the warranty documentation included with your purchase. It is recommended to register your product to ensure full warranty coverage.
Support
For technical assistance, service inquiries, or to obtain replacement parts, please contact Yorkville customer support directly or reach out to your authorized Yorkville dealer. Contact information can usually be found on the Yorkville website or in your product documentation.