PATONA Protect LP-E6NH Battery Instruction Manual

1. Introduction

This instruction manual provides essential information for the safe and effective use of your PATONA Protect LP-E6NH rechargeable battery. Designed for compatibility with various Canon EOS cameras, this battery offers reliable power for your photography and videography needs. Please read this manual thoroughly before using the product.

Image 1.1: The PATONA Protect LP-E6NH battery, a high-capacity rechargeable power source for compatible Canon EOS cameras.

2. Safety Instructions

To ensure safe operation and prolong the life of your battery, observe the following safety guidelines:

• Do not disassemble, open, or shred the battery pack.
• Do not expose the battery to heat or fire. Avoid storage in direct sunlight.
• Do not short-circuit the battery. Do not store battery packs haphazardly in a box or drawer where they may short-circuit each other or be short-circuited by other metal objects.
• Do not remove the battery from its original packaging until required for use.
• Do not subject battery packs to mechanical shock.
• In the event of a battery leaking, do not allow the liquid to come into contact with the skin or eyes. If contact has been made, wash the affected area with copious amounts of water and seek medical advice.
• Do not use any charger other than that specifically provided for use with the equipment.
• Observe the plus (+) and minus (-) marks on the battery and equipment and ensure correct use.
• Keep batteries out of the reach of children.
• Seek medical advice immediately if a battery has been swallowed.
• The PATONA Protect LP-E6NH battery features integrated protection against overcharge, overvoltage, and short-circuiting, enhancing safety during use.
• The innovative V1 housing is designed for extreme temperatures up to +90°C, and NTC sensor technology ensures current stability.

Image 2.1: The PATONA Protect battery offers total security with protection against overheating, overvoltage, and overcharge.

Image 2.2: PATONA batteries are designed to be safe and reliable, featuring protection against overload, overvoltage, and short-circuits for maximum operational safety.

3. Setup

3.1 Initial Charging

Before first use, fully charge the PATONA Protect LP-E6NH battery. The battery can be charged using an original Canon charger or a compatible PATONA charger.

1. Insert the battery into the compatible charger.
2. Connect the charger to a power source.
3. Allow the battery to charge until the charger indicates a full charge. A rapid charge can achieve full capacity in approximately 150 minutes.

Image 3.1: The battery features an A+ chip for 100% compatibility and decoding, allowing for fast charging in about 150 minutes.

4. Operating Instructions

4.1 Inserting the Battery

To insert the battery into your camera:

1. Ensure the camera is turned off.
2. Open the battery compartment cover on your camera.
3. Insert the PATONA Protect LP-E6NH battery, aligning the contacts correctly. Push until it clicks into place.
4. Close the battery compartment cover securely.

4.2 Checking Battery Level

The battery level can be checked through your camera's display or viewfinder, similar to an original Canon battery. The battery is fully decoded and recognized by compatible cameras.

4.3 Compatible Camera Models

The PATONA Protect LP-E6NH battery is compatible with the following Canon EOS camera models and accessories:

• Canon EOS R5
• Canon EOS R6
• Canon EOS R6 Mark II
• Canon EOS R7
• Canon EOS R
• Canon EOS 5D Mark II
• Canon EOS 5D Mark III
• Canon EOS 5D Mark IV
• Canon EOS 5Ds
• Canon EOS 5Ds R
• Canon EOS 6D
• Canon EOS 6D Mark II
• Canon EOS 7D
• Canon EOS 7D Mark II
• Canon EOS 7D Mark III
• Canon EOS 60D
• Canon EOS 60Da
• Canon EOS 70D
• Canon EOS 80D
• Canon EOS 90D
• Canon WFT-E5
• Canon WFT-E7
• Canon XC10
• Canon XC15

Image 4.1: The PATONA Protect battery is compatible with a wide range of Canon EOS DSLR and mirrorless cameras, as well as WFT-E and XC series devices.

5. Maintenance

Proper maintenance ensures optimal performance and extends the lifespan of your battery:

• Storage: Store the battery in a cool, dry place away from direct sunlight and extreme temperatures. For long-term storage, it is recommended to store the battery at approximately 50% charge.
• Cleaning: Keep the battery contacts clean. Use a dry, soft cloth to wipe off any dust or dirt.
• Temperature: Avoid exposing the battery to temperatures below 0°C (32°F) or above 40°C (104°F) for extended periods, except during operation within the camera's specified limits. The V1 housing is designed to withstand temperatures up to 90°C.
• No Memory Effect: The Lithium-ion composition of this battery means it does not suffer from the "memory effect," allowing you to recharge it at any charge level without reducing its overall capacity.

6. Troubleshooting

6.1 Battery Not Charging

• Ensure the charger is properly connected to a power source and the battery is correctly inserted.
• Check if the charger's indicator light is functioning as expected.
• Try using a different compatible charger or power outlet to rule out issues with the charging equipment.
• Inspect battery contacts for dirt or damage; clean if necessary.

6.2 Camera Not Recognizing Battery

• Ensure the battery is fully inserted and the compartment door is closed.
• Verify that your camera model is listed in the compatible models section (Section 4.3).
• Turn the camera off and on again.
• Remove and reinsert the battery.
• If possible, test with another known-good battery to determine if the issue is with the camera or the battery.

6.3 Shortened Battery Life

• Battery performance can be affected by extreme temperatures. Operate within recommended temperature ranges.
• Ensure the battery is fully charged before use.
• Over time, all rechargeable batteries experience a natural decrease in capacity. If the battery is old, consider replacing it.

7. Specifications

Image 7.1: Key specifications highlighting optimal performance: premium Li-ion cells, 2600 mAh endurance, 18.7 Wh compact energy, and 7.2 V constant power.

Image 7.2: Innovative technology includes a V1 housing designed for extreme temperatures up to 90°C and NTC sensor technology for current stability.

8. Warranty and Compliance

PATONA products are manufactured and tested to high-quality standards. This product is CE compliant, ensuring it meets European safety, health, and environmental protection requirements.

For specific warranty terms and conditions, please refer to the documentation provided with your purchase or visit the official PATONA website.

9. Support

If you encounter any issues or have questions regarding your PATONA Protect LP-E6NH battery that are not addressed in this manual, please contact PATONA customer support. Refer to the contact information provided on the product packaging or the official PATONA website for assistance.