1. Introduction
This manual provides comprehensive instructions for the installation, operation, and maintenance of your Stinger HEIGH10 UN1810 10-inch Touch Screen Multimedia Receiver. This advanced car audio and navigation system is designed to enhance your in-vehicle entertainment and connectivity experience. Please read this manual thoroughly before using the product to ensure proper operation and to prevent damage.
Figure 1: Stinger HEIGH10 UN1810 Multimedia Receiver. This image shows the front view of the HEIGH10 unit, featuring its large 10-inch touchscreen display with various application icons such as Radio, Phone, BT Music, SiriusXM, Apple CarPlay, Android Auto, USB, iPod, and Settings.
2. Safety Information
Observe the following safety precautions to prevent injury or damage to the unit:
- Do not operate the unit in a manner that distracts you from driving. Always prioritize road safety.
- Ensure proper wiring and installation to prevent electrical shorts or fire hazards. Consult a professional installer if unsure.
- Avoid exposing the unit to extreme temperatures, direct sunlight for prolonged periods, or excessive moisture.
- Do not attempt to disassemble or modify the unit. This may void the warranty and cause damage.
- Keep the volume at a level that allows you to hear external sounds, such as emergency vehicles.
3. Package Contents
Verify that all items are present in the package before beginning installation:
- Stinger HEIGH10 UN1810 Multimedia Receiver
- Power cable
- Speaker wire
- RCA interconnects
- Fuse holder
- SE-P14 IGO Navigation Add-on SD Card
- Installation hardware (brackets, screws, etc. - typical for single-DIN mounting)
- User Manual (this document)
Figure 2: SE-P14 IGO Navigation Add-on SD Card. This image displays the Stinger Select branded packaging for the SE-P14 navigation SD card, which is included for IGO navigation functionality.
4. Setup and Installation
The Stinger HEIGH10 UN1810 is designed for single-DIN mounting. Professional installation is recommended due to the complexity of vehicle electrical systems.
4.1. Pre-Installation Checklist
- Disconnect the vehicle's negative battery terminal before starting any electrical work.
- Ensure you have all necessary tools and mounting accessories.
- Review your vehicle's specific wiring diagram.
4.2. Mounting the Unit
The HEIGH10 features a modular design allowing the 10-inch screen to be mounted independently from the single-DIN chassis. Secure the single-DIN chassis into your vehicle's dashboard opening using the provided mounting hardware. Attach the 10-inch display to the chassis according to the specific instructions provided with your mounting kit.
Figure 3: HEIGH10 unit installed in a vehicle, showing the adjustable screen angle. The image depicts the 10-inch display tilted forward, demonstrating its flexibility in positioning within the vehicle's interior.
4.3. Wiring Connections
Connect the power cable, ground wire, speaker wires, and RCA interconnects as per the wiring diagram included with your unit. Ensure all connections are secure and properly insulated. The included fuse holder should be installed on the main power line close to the battery.
- Power Cable: Connect to a constant 12V power source.
- Ground Wire: Connect to a clean, unpainted metal chassis point.
- Accessory/Ignition Wire: Connect to a switched 12V source that turns on/off with the vehicle's ignition.
- Speaker Wires: Connect to your vehicle's speakers, observing polarity.
- RCA Interconnects: For external amplifiers or audio sources.
- USB Ports: For media playback and smartphone connectivity.
- HDMI Input: For external video sources.
4.4. Navigation SD Card Insertion
Insert the SE-P14 IGO Navigation Add-on SD Card into the designated SD card slot on the unit. Ensure it is fully seated for proper navigation functionality.
5. Operating Instructions
The HEIGH10 features a responsive 10-inch touchscreen interface for intuitive control.
5.1. Basic Operation
- Power On/Off: Press and hold the power button (usually located on the front panel or a soft button on the screen).
- Volume Control: Use the physical volume knob or on-screen controls.
- Home Screen: Tap the "Home" icon to return to the main application menu.
- Settings: Access system settings via the "Settings" icon to customize audio, display, and general preferences.
Figure 4: Main menu screen of the HEIGH10 unit. This image provides a clear view of the 10-inch touchscreen displaying various application icons, including Radio, Phone, BT Music, SiriusXM, Apple CarPlay, Android Auto, USB, iPod, and Settings, along with signal strength and time indicators.
5.2. Radio Operation
Select the "Radio" icon from the home screen to access AM/FM tuning.
- Tuning: Use the on-screen arrows to manually tune or seek for stations.
- Presets: Save your favorite stations to preset buttons for quick access.
- Source Selection: Switch between AM and FM bands.
Figure 5: Radio interface of the HEIGH10 unit. This image shows the 10-inch screen displaying the FM radio interface with current frequency (99.1 MHz), station name, and multiple preset buttons for different frequencies.
5.3. Bluetooth Connectivity
Pair your smartphone via Bluetooth for hands-free calling and audio streaming.
- Pairing: Go to "Settings" > "Bluetooth" on the unit and enable Bluetooth on your phone. Select the HEIGH10 from your phone's Bluetooth device list.
- Phone Calls: Make and receive calls directly from the unit's screen.
- BT Music: Stream audio from your paired device.
5.4. USB and iPod Playback
Connect USB devices or iPods to the designated USB port for media playback.
- USB: Supports various audio and video file formats.
- iPod: Control music playback directly from the unit.
5.5. Apple CarPlay and Android Auto
Connect your compatible smartphone via USB to access Apple CarPlay or Android Auto for seamless integration of navigation, music, and communication apps.
- Apple CarPlay: For iPhone users.
- Android Auto: For Android smartphone users.
5.6. IGO Navigation
With the SE-P14 IGO Navigation Add-on SD Card inserted, select the "Navigation" icon (or similar, based on the main screen image, it's not explicitly shown but implied by the product title) to access the IGO navigation system. Follow the on-screen prompts for destination entry and route guidance.
6. Maintenance
Proper maintenance ensures the longevity and optimal performance of your HEIGH10 unit.
- Screen Cleaning: Use a soft, lint-free cloth specifically designed for electronics screens. Do not use abrasive cleaners or solvents.
- General Cleaning: Wipe the unit's exterior with a soft, damp cloth.
- Software Updates: Periodically check the STINGER website for firmware updates to ensure the best performance and compatibility.
7. Troubleshooting
If you encounter issues, refer to the following common troubleshooting steps:
| Problem | Possible Cause | Solution |
|---|---|---|
| Unit does not power on. | No power, blown fuse, incorrect wiring. | Check power connections, inspect fuse, verify wiring. |
| No sound from speakers. | Incorrect speaker wiring, volume too low, mute activated. | Check speaker connections, increase volume, deactivate mute. |
| Bluetooth connection issues. | Device not paired, Bluetooth off, interference. | Ensure Bluetooth is on for both devices, re-pair, move closer. |
| Navigation not working. | SD card not inserted correctly, corrupted data. | Re-insert SD card, ensure it's the correct card, contact support if data is corrupted. |
If the problem persists after attempting these solutions, contact STINGER customer support.
8. Specifications
Key technical specifications for the Stinger HEIGH10 UN1810 Multimedia Receiver:
- Model Name: HEIGH10 UN1810
- Screen Size: 10 Inches (26 cm visible screen diagonal)
- Display Type: Touchscreen
- Mounting Type: Single-DIN Chassis with Detachable 10-inch Panel Mount
- Connectivity Technology: Bluetooth, HDMI, RCA, USB
- Map Type (with add-on): North America (via SE-P14 IGO Navigation SD Card)
- Audio Output Mode: Speaker
- Vehicle Service Type: Car
- Item Weight: 12.5 pounds
- Package Dimensions: 17 x 14.5 x 13.38 inches
9. Warranty and Support
For warranty information and technical support, please refer to the official STINGER website or contact their customer service department. Keep your purchase receipt as proof of purchase for warranty claims.
STINGER Official Store: Visit the STINGER Store on Amazon
