Introduction
Thank you for choosing the Monkey Loop Prime 03 Guitar Stand. This stand is designed to provide stable and secure support for both electric and acoustic guitars. Constructed from durable steel with protective rubber contact points, it offers a compact, foldable design for easy transport and storage. Please read this manual carefully before use to ensure proper setup and safe operation.
Safety Information
- Ensure the stand is fully unfolded and stable on a flat, level surface before placing any instrument on it.
- Do not exceed the weight capacity of the stand. It is designed for a single guitar.
- Keep the stand away from high-traffic areas to prevent accidental bumps or tip-overs.
- Regularly inspect the stand for any signs of wear or damage. Do not use if damaged.
- Keep out of reach of small children and pets.
Package Contents
Verify that all components are present in the package:
- 1 x Monkey Loop Prime 03 Guitar Stand (pre-assembled)
Note: Guitars shown in images are for illustrative purposes only and are not included.
Setup
The Monkey Loop Prime 03 Guitar Stand comes pre-assembled and requires minimal setup. Follow these steps to prepare the stand for use:
- Unfolding the Stand: Gently pull the two main support arms apart until the stand forms a stable 'A' shape. Ensure the hinge mechanism locks securely into place.
Image: The Monkey Loop Prime 03 Guitar Stand in its fully unfolded position, ready for use.
- Checking Stability: Place the stand on a flat, level surface. Gently rock the stand to confirm it is stable and does not wobble. The rubber feet on the base provide anti-slip stability.
Image: A close-up view of the stand's hinge and locking mechanism, ensuring secure setup.
Operating Instructions
Once the stand is set up, you can safely place your guitar on it:
- Placing an Electric Guitar: Carefully lower your electric guitar onto the stand, ensuring the body rests securely on the two lower padded arms. The neck should lean against the upper padded support.
Image: An electric guitar positioned correctly on the stand, demonstrating proper support.
- Placing an Acoustic Guitar: For acoustic guitars, follow the same procedure. Ensure the wider body of the acoustic guitar fits comfortably and stably on the lower padded arms.
Image: An acoustic guitar placed on the stand, illustrating its compatibility with various guitar types.
- Removing the Guitar: Lift the guitar straight up from the stand. Avoid pulling it sideways, which could cause instability.
- Folding for Storage/Transport: To fold the stand, gently push the two main support arms together until the hinge mechanism disengages and the stand collapses into a compact form.
Image: The guitar stand folded for convenient storage or transport.
Maintenance
- Cleaning: Wipe the stand with a soft, dry cloth to remove dust. For stubborn dirt, use a slightly damp cloth and then dry thoroughly. Avoid abrasive cleaners or solvents.
- Inspection: Periodically check all joints, screws, and rubber padding for wear or damage. Ensure all parts are secure.
- Storage: When not in use, fold the stand and store it in a dry place away from extreme temperatures and direct sunlight.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Stand wobbles or is unstable. | Not fully unfolded; uneven surface; damaged rubber feet. | Ensure the stand is fully locked open. Move to a flat, level surface. Inspect rubber feet for damage. |
| Guitar slips on the stand. | Padded arms are dirty or worn; guitar not placed correctly. | Clean the rubber padding. Ensure the guitar body rests fully on both lower arms and the neck leans against the upper support. |
| Stand is difficult to fold/unfold. | Hinge mechanism stiff or obstructed. | Apply a small amount of silicone lubricant to the hinge if necessary. Ensure no debris is obstructing the mechanism. |
Specifications
- Model: Prime 03
- Item Model Number: 10176052
- Material: Alloy Steel, Rubber
- Height: 44 cm (approximately 17.3 inches)
- Product Dimensions (unfolded): Approximately 13.39 x 3.15 x 18.11 inches (L x W x H)
- Item Weight: 1 kg (2.2 pounds)
- Color: Black
- Compatibility: Suitable for most electric and acoustic guitars.
Warranty and Support
For warranty information or technical support, please refer to the retailer where you purchased the Monkey Loop Prime 03 Guitar Stand or visit the official Monkey Loop website. Keep your proof of purchase for warranty claims.
Manufacturer: Monkey Loop
Date First Available: January 19, 2021