1. Introduction
This manual provides detailed instructions for the safe installation, operation, and maintenance of your Hudson Valley Lighting Dunkirk 6-Light Flush Mount fixture. Please read all instructions carefully before beginning installation and retain this manual for future reference.
Image 1: The Hudson Valley Lighting Dunkirk 6-Light Flush Mount fixture, showcasing its polished nickel base and numerous radiating arms adorned with faceted K9 crystal beads, designed for ceiling installation.
2. Important Safety Information
WARNING: Risk of electric shock. Disconnect power at the fuse box or circuit breaker before installation or servicing. Consult a qualified electrician if you are unsure about the installation process.
- Ensure all electrical connections comply with local codes and ordinances, as well as the National Electric Code (NEC).
- Do not exceed the maximum wattage specified for the fixture (60 watts per bulb, E12 base).
- Handle crystal components with care to prevent breakage.
- This fixture is designed for indoor use only and is not water resistant.
- Keep flammable materials away from the light fixture.
3. Setup and Installation
Tools Required: Screwdriver, wire strippers, electrical tape, ladder, safety glasses.
- Turn Off Power: Locate the circuit breaker or fuse box and turn off the power to the junction box where the fixture will be installed. Verify power is off using a voltage tester.
- Prepare Mounting: Carefully unpack the fixture and all components. Refer to the included hardware packet for specific mounting bracket instructions. Attach the mounting bracket to the junction box using the provided screws.
- Make Electrical Connections:
- Connect the fixture's ground wire (usually bare copper or green) to the house ground wire.
- Connect the fixture's hot wire (usually black) to the house hot wire (black).
- Connect the fixture's neutral wire (usually white) to the house neutral wire (white).
- Secure all connections with wire nuts and wrap with electrical tape for added safety.
- Mount the Fixture: Carefully lift the fixture and align it with the mounting bracket. Secure the fixture to the bracket using the provided screws or nuts.
- Install Bulbs: Insert six E12 base incandescent bulbs (max 60 watts each) into the sockets. Do not overtighten.
- Attach Crystal Elements: The faceted K9 crystal elements are pre-assembled on radiating arms. Ensure they are securely attached. If any require assembly, follow the specific instructions provided in the packaging.
- Restore Power: Turn the power back on at the circuit breaker or fuse box.
4. Operating Instructions
The Hudson Valley Lighting Dunkirk fixture is operated via a standard wall switch or a compatible dimmer switch (not included). Ensure the wall switch is in the "ON" position for the fixture to receive power.
- Turning On/Off: Use the wall switch connected to the fixture to turn the lights on or off.
- Dimming (Optional): If a compatible dimmer switch is installed, adjust the dimmer to control the light intensity.
5. Maintenance
Regular maintenance will help preserve the appearance and functionality of your fixture.
- Cleaning:
- Always disconnect power before cleaning.
- Wipe the polished nickel finish with a soft, dry cloth. Do not use abrasive cleaners or polishes, as they may damage the finish.
- Gently dust the crystal elements with a soft, lint-free cloth. For deeper cleaning, a mild glass cleaner can be sparingly applied to a cloth, then wiped onto the crystals. Avoid spraying cleaner directly onto the fixture.
- Bulb Replacement:
- Ensure power is off before replacing bulbs.
- Allow bulbs to cool completely before touching.
- Unscrew the old bulb and screw in a new E12 base bulb, not exceeding 60 watts.
6. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on. |
|
|
| Lights flicker. |
|
|
If you experience issues not covered here, please contact customer support.
7. Specifications
| Model Name | Dunkirk |
| Model Number | 6028-PN |
| Brand | Hudson Valley Lighting |
| Finish | Polished Nickel |
| Shade Material | Crystal (Faceted K9) |
| Product Dimensions | 30"L x 30"W x 15.25"H |
| Number of Lights | 6 |
| Bulb Base | E12 |
| Max Wattage per Bulb | 60 Watts |
| Voltage | 120 Volts |
| Mounting Type | Flush Mount, Semi Flush Mount |
| Item Weight | 16 Pounds |
| Assembly Required | Yes |
8. Warranty Information
This Hudson Valley Lighting fixture comes with a 1-year limited manufacturer warranty. This warranty covers defects in materials and workmanship under normal use. Please retain your proof of purchase for warranty claims. For specific details regarding warranty coverage and limitations, please refer to the official Hudson Valley Lighting warranty policy or contact their customer service.
9. Customer Support
For technical assistance, missing parts, or warranty inquiries, please contact Hudson Valley Lighting customer support. Visit the official Hudson Valley Lighting website for contact information.
You can also visit the Hudson Valley Lighting Store on Amazon for more product information.
