Grizzl-E Classic Level 2 EV Charger Instruction Manual

1. Important Safety Information

Read all instructions before using this product. Failure to follow these instructions may result in electric shock, fire, or serious injury.

• Electrical Safety: This device operates on high voltage. Installation and servicing should only be performed by qualified personnel.
• Grounding: Ensure the charging station is properly grounded to reduce the risk of electric shock.
• Outdoor Use: The Grizzl-E Classic charger is designed for both indoor and outdoor use, featuring IP67 water resistance. However, avoid submerging the unit in water.
• Cable Management: Always handle the charging cable with care. Do not drive over, kink, or damage the cable. Store the cable properly when not in use.
• Emergency Stop: In case of an emergency, immediately disconnect power to the charging station at the circuit breaker.
• UL Certified: This product is UL Full Tested and Certified, ensuring compliance with safety standards.

2. Product Overview

The Grizzl-E Classic Level 2 EV Charger is a robust and reliable electric vehicle charging station designed for residential and commercial use. It provides fast charging for all EVs and PHEVs sold in North America.

Image 2.1: Grizzl-E Classic Level 2 EV Charger unit, NEMA 14-50 plug, and 24-foot charging cable.

Key Features:

• Adjustable Amperage: Supports 40A, 32A, 24A, and 16A output settings.
• NEMA 14-50 Plug: For easy connection to a compatible 240V outlet.
• 24-foot Premium Cable: Provides ample reach for charging.
• Durable Construction: NEMA-4 water and air-tight metal enclosure, suitable for all weather conditions.
• Safety Protections: Includes over current, over voltage, under voltage, missing diode, ground fault, and over temperature protections. Built-in GFCI.
• Self-Monitoring and Recovery: Features power outage recovery.

Image 2.2: Visual representation of the Grizzl-E charger's high-speed charging up to 40 Amps for indoor/outdoor use.

Image 2.3: Overview of Grizzl-E charger's safety features, certifications, and warranty.

3. Package Contents

Verify that all items are present in the package before proceeding with installation.

• Grizzl-E Classic EV Charger Unit
• Mounting Bracket + Screws
• Backplate Cradle + Screws
• Pin (for securing charger to bracket)
• Easy EV Plug (J1772 type) Holder + Screws

Image 3.1: All components included in the Grizzl-E charger package.

4. Installation

The Grizzl-E Classic charger is designed for easy installation. It requires a dedicated 240V NEMA 14-50 outlet. Consult a qualified electrician if you do not have a suitable outlet or are unsure about the electrical requirements.

Mounting Steps:

1. Attach the Backplate Cradle: Secure the Backplate Cradle to the desired wall surface using the provided screws. Ensure it is mounted on a sturdy surface capable of supporting the charger's weight.
2. Attach the Mounting Bracket to the Charger: Fasten the separate Mounting Bracket to the back of the Grizzl-E charger unit.
3. Join Plates and Secure: Slide the charger (with its attached mounting bracket) onto the wall-mounted Backplate Cradle. Secure the two plates together using the provided pin.

Image 4.1: Step-by-step guide for mounting the Grizzl-E EV charger.

Electrical Connection:

• Plug the NEMA 14-50 plug of the Grizzl-E charger into a dedicated 240V NEMA 14-50 receptacle.
• Ensure the outlet is on a circuit breaker appropriate for the desired charging amperage (e.g., 50A breaker for 40A charging, 40A breaker for 32A charging).

5. Operating Instructions

The Grizzl-E Classic charger is designed for straightforward operation.

Charging Your Vehicle:

1. Ensure the Grizzl-E charger is securely mounted and plugged into a live NEMA 14-50 outlet.
2. Open your electric vehicle's charging port.
3. Insert the J1772 charging connector firmly into your vehicle's charging port. A click indicates a secure connection.
4. The charger will initiate the charging process automatically. Monitor your vehicle's dashboard or charging indicator for status.
5. To stop charging, unlock the charging port from your vehicle (if applicable), then press the release button on the J1772 connector and pull it out.
6. Return the charging connector to its holder to protect it from elements and damage.

Image 5.1: Grizzl-E charging handle connected to an EV charging port.

Adjusting Amperage Output:

The Grizzl-E charger's maximum current output can be adjusted using internal DIP switches. This adjustment should be performed before initial use or if your electrical circuit capacity changes. Always set the amperage to 80% of your circuit breaker's rating.

• 40 Amps: For a 50A circuit breaker (provides 28-30 miles per hour charge rate).
• 32 Amps: For a 40A circuit breaker (provides 22-25 miles per hour charge rate).
• 24 Amps: For a 30A circuit breaker (provides 15-18 miles per hour charge rate).
• 16 Amps: For a 20A circuit breaker (provides 10-12 miles per hour charge rate).

Refer to the detailed instructions provided with the unit for accessing and setting the DIP switches. This procedure typically involves opening the unit's enclosure, which should only be done by a qualified individual after disconnecting power.

6. Maintenance

The Grizzl-E Classic charger requires minimal maintenance due to its durable design.

• Regular Cleaning: Periodically wipe the exterior of the charger and the charging cable with a damp cloth to remove dust and dirt. Do not use harsh chemicals or abrasive cleaners.
• Cable Inspection: Regularly inspect the charging cable and connector for any signs of wear, cuts, or damage. If damage is found, discontinue use and contact support.
• Storage: When not in use, ensure the charging cable is neatly coiled and the connector is placed in its holder to prevent damage and keep it clean.

7. Troubleshooting

If you encounter issues with your Grizzl-E Classic charger, refer to the following common troubleshooting steps:

• No Power/Indicator Lights Off:
  • Check if the NEMA 14-50 plug is fully inserted into the wall outlet.
  • Verify that the circuit breaker for the outlet is in the 'ON' position.
  • Ensure there is power to the outlet by testing with another device.
• Charging Not Initiating:
  • Ensure the J1772 connector is fully and securely inserted into the vehicle's charging port.
  • Check your vehicle's charging settings; some vehicles require specific settings to begin charging.
  • Verify that the charger's amperage setting is compatible with your vehicle and electrical circuit.
• Charging Interrupted:
  • Check for any error codes or indicator light patterns on the charger (refer to the full manual for specific codes).
  • Inspect the cable and connector for damage.
  • A power outage or fluctuation may have occurred. The unit features power outage recovery.
• Ground Fault Indication: If the GFCI trips, disconnect the charger, wait a few minutes, and try reconnecting. If the issue persists, consult a qualified electrician.

For persistent issues or advanced troubleshooting, contact Grizzl-E customer support.

8. Specifications

Image 8.1: Detailed dimensions of the Grizzl-E charger and its cables.

9. Warranty and Support

The Grizzl-E Classic Level 2 EV Charger comes with a 3-year warranty. For warranty claims, technical support, or any inquiries, please contact United Chargers Inc., the manufacturer.

Grizzl-E is a Canadian EV brand committed to providing durable, high-quality charging solutions. Their products are built to handle various weather conditions and everyday use, offering reliable performance.

For further assistance, please refer to the contact information provided with your product or visit the official Grizzl-E website.