Introduction
Thank you for choosing the Design House Treviento LED 52-inch Ceiling Fan. This manual provides essential information for the safe installation, operation, and maintenance of your new ceiling fan. Please read all instructions carefully before beginning installation and retain this manual for future reference.
The Design House Treviento LED 52-inch Ceiling Fan in white, shown with its included remote control. This fan features three blades and an integrated LED light kit.
Safety Information
- Always disconnect power at the main circuit breaker before installation or servicing.
- Ensure all electrical connections comply with local codes and ordinances.
- Consult a qualified electrician if you are unfamiliar with electrical wiring.
- Mount the fan only to an outlet box marked 'Acceptable for Fan Support of 35 lbs (15.9 kg) or less'.
- Do not bend blade holders during installation or cleaning.
- Keep hands clear of rotating fan blades.
The UL Listed certification mark, indicating the product meets safety standards.
Package Contents
Verify that all components are present before beginning installation:
- Mounting Bracket
- Canopy
- Yoke Cover
- Motor
- Motor Cover
- Glass Shade
- 3 Plywood Blades
- Two LED Bulbs (E26 Medium, 9.5W, 3000K)
- Remote Control
- 6-inch Downrod
Setup and Installation
This ceiling fan is designed for self-installation. Follow these general steps. Detailed diagrams and specific wiring instructions are typically found in the full printed manual.
- Prepare for Installation: Turn off power at the circuit breaker. Ensure the mounting location is suitable for fan support.
- Install Mounting Bracket: Secure the mounting bracket to the ceiling outlet box.
- Assemble Downrod and Motor: Attach the 6-inch downrod to the fan motor assembly.
- Hang Fan Assembly: Carefully lift the fan assembly and hang it from the mounting bracket.
- Make Electrical Connections: Connect the fan's wiring to the household wiring according to local electrical codes. Ensure the remote receiver is properly installed and connected.
- Attach Canopy and Motor Cover: Secure the canopy and motor cover to conceal wiring and mounting hardware.
- Install Fan Blades: Attach the three plywood blades to the motor. Ensure all screws are tightened securely.
- Install Light Kit: Connect the LED light kit and attach the white frosted glass shade. Insert the two E26 LED bulbs.
Detailed dimensions of the 52-inch fan, including a 6-inch downrod and 12-degree blade pitch. Illustrates tri-mount options: flush, downrod, and sloped ceiling installation.
Operating Instructions
Your Treviento ceiling fan is operated using the included remote control.
Remote Control Functions:
- Fan On/Off: Press the fan button to turn the fan on or off.
- Fan Speed: Cycle through 3 speed settings (Low, Medium, High) using the speed control button.
- Light On/Off: Press the light button to turn the integrated LED light on or off.
Reverse Airflow Function (Summer/Winter Mode):
The fan features a reversible motor to optimize air circulation for different seasons. The reverse switch is typically located on the fan motor housing. Ensure the fan is off before changing the direction.
- Summer Mode (Counter-Clockwise): Blades rotate counter-clockwise, creating a downward breeze that produces a 'wind chill' effect, making the room feel cooler.
- Winter Mode (Clockwise): Blades rotate clockwise, drawing air up towards the ceiling and circulating warm air downwards, helping to save on heating costs.
This diagram explains the reversible motor function. Counter-clockwise rotation creates a 'wind chill' effect for summer cooling, while clockwise rotation disperses warm air for winter heating.
Maintenance
Regular maintenance ensures optimal performance and longevity of your ceiling fan.
- Cleaning: Periodically clean the fan blades and motor housing with a soft, damp cloth. Do not use abrasive cleaners or solvents.
- Light Bulb Replacement: The fan uses two E26 Medium base LED bulbs. To replace, ensure power is off, remove the glass shade, unscrew the old bulb, and screw in the new one. The included LED bulbs have a long lifespan of over 15,000 hours.
- Tighten Fasteners: Check all screws and fasteners annually to ensure they are secure.
Troubleshooting
If you experience issues with your ceiling fan, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Fan does not start | No power to the fan; Loose wire connections; Remote control battery low. | Check circuit breaker; Verify all wire connections are secure; Replace remote control battery. |
| Fan makes noise | Loose fan blades or mounting hardware; Motor housing screws loose. | Tighten all blade screws and mounting hardware; Ensure motor housing screws are secure. |
| Fan wobbles excessively | Loose blade screws; Unbalanced blades; Improper mounting. | Tighten all blade screws; Use a blade balancing kit (not included) if necessary; Re-check mounting bracket installation. |
| Light does not work | Loose wire connections; Faulty bulb; No power to the light kit. | Check light kit wiring; Replace bulb; Verify power supply to the light kit. |
| Remote control not working | Low battery; Remote not paired; Obstruction. | Replace remote battery; Refer to remote pairing instructions (if applicable); Ensure no obstructions between remote and receiver. |
Specifications
| Brand | Design House |
| Model Number | 156513-WHT |
| Color | White |
| Style | Treviento |
| Product Dimensions | 52"L x 52"W x 15"H |
| Material | Alloy Steel (Body), Plywood (Blades), Glass (Shade) |
| Indoor/Outdoor Usage | Indoor |
| Power Source | AC/DC |
| Light Source Type | LED |
| Light Color | White |
| Color Temperature | 3000 Kelvin |
| Brightness | 800 Lumen |
| Wattage | 9.5 watts (light) |
| Voltage | 120 Volts |
| Fan Airflow (High Speed) | 4398 cfm |
| Energy Usage (without light) | 39 watts |
| Airflow Efficiency | 85 cfm per watt |
| Item Weight | 15.35 pounds |
| UPC | 044321018474 |
Warranty
This Design House Treviento LED 52-inch Ceiling Fan is covered by a 10-year limited warranty. For specific terms and conditions, please refer to the warranty documentation included with your product or contact customer support.
Support
For further assistance, technical support, or to inquire about replacement parts, please visit the official Design House store or contact their customer service department.
Design House Official Store: Visit Design House Store on Amazon