L.O.L. Surprise! 3-in-1 Party Cruiser Instruction Manual

Introduction

This manual provides detailed instructions for the L.O.L. Surprise! 3-in-1 Party Cruiser. This versatile toy transforms from a car into a pool and a dance floor, offering multiple play options for L.O.L. Surprise! dolls. Please read these instructions carefully before use to ensure proper setup and operation.

What's in the Box

The L.O.L. Surprise! 3-in-1 Party Cruiser package includes the following items:

• L.O.L. Surprise 3-in-1 Party Cruiser

Note: Dolls are sold separately and are not included with the Party Cruiser unless specified on the product packaging.

Image: The L.O.L. Surprise! 3-in-1 Party Cruiser as it appears in its retail packaging.

Setup

Follow these steps to set up your L.O.L. Surprise! 3-in-1 Party Cruiser:

1. Unpack the Cruiser: Carefully remove all components from the packaging. Ensure no small parts are left behind.
2. Prepare for Car Mode: The cruiser is typically in car mode upon unpacking. Ensure the rear section is closed and secured.
3. Activate Headlights: To activate the headlights, gently push down on the front light covers. The lights will pop up. To illuminate them, press the joystick located inside the driver's seat.
4. Adjust Seats: The seats are designed to accommodate different L.O.L. Surprise! doll sizes. Pull out the seat section for smaller dolls or push it in for larger dolls.

Image: Side view of the Party Cruiser in car mode, showing a doll seated and the adjustable seat feature.

Operating Instructions

The L.O.L. Surprise! 3-in-1 Party Cruiser offers three modes of play:

1. Car Mode

• Place your L.O.L. Surprise! dolls in the driver's and passenger seats. Adjust the seats as needed for a snug fit.
• The steering wheel and side mirrors are movable for interactive play.
• Activate the pop-up headlights by pressing the front light covers and then the joystick.

Image: The Party Cruiser in car mode, ready for dolls to drive.

2. Pool Mode

To transform the car into a pool:

1. Open the rear section of the car by pulling it upwards.
2. Remove the dance floor panel from the bottom of the rear section.
3. Flip the rear section over and extend it outwards to reveal the pool area.
4. Fill the pool with a small amount of water for your dolls to enjoy.

3. Dance Floor Mode

To transform the car into a dance floor:

1. Open the rear section of the car by pulling it upwards.
2. The dance floor panel is located at the bottom of the rear section. Ensure it is flat and accessible.
3. Position your dolls on the dance floor for a party.

Image: The rear of the Party Cruiser showing the pool and dance floor configurations, with dolls interacting.

Official Product Video

Video: An official product video demonstrating the L.O.L. Surprise! 3-in-1 Party Cruiser's features, including its transformation into a car, pool, and dance floor, and the light-up headlights.

Maintenance

To ensure the longevity of your L.O.L. Surprise! 3-in-1 Party Cruiser, follow these maintenance guidelines:

• Cleaning: Wipe the cruiser with a damp cloth to remove dust and dirt. Avoid using harsh chemicals or abrasive cleaners.
• Water Play: If used as a pool, empty and dry the pool area thoroughly after each use to prevent mold or mildew.
• Storage: Store the cruiser in a cool, dry place away from direct sunlight when not in use.
• Battery Replacement: If the headlights dim or stop working, replace the batteries. Refer to the battery compartment for specific battery type and replacement instructions (typically located on the underside of the vehicle).

Troubleshooting

If you encounter any issues with your L.O.L. Surprise! 3-in-1 Party Cruiser, refer to the following common solutions:

• Headlights not lighting up: Check if the light covers are fully popped up. Ensure batteries are correctly installed and are not depleted. Replace batteries if necessary.
• Transformation difficulty: Ensure all moving parts are free from obstruction. Apply gentle, even pressure when transforming between modes. Do not force parts.
• Dolls not fitting in seats: Adjust the seat sections by pulling them out for smaller dolls or pushing them in for larger dolls.

Specifications

Key specifications for the L.O.L. Surprise! 3-in-1 Party Cruiser:

Image: Visual representation of the Party Cruiser's dimensions.

Warranty and Support

Warranty information for the L.O.L. Surprise! 3-in-1 Party Cruiser is not provided in the available product data. For specific warranty details or customer support, please refer to the product packaging or contact MGA Entertainment, the manufacturer, directly.