Haier I-Pro Series 7 HD100-A2979 Heat Pump Tumble Dryer User Manual

1. Introduction

Thank you for choosing the Haier I-Pro Series 7 HD100-A2979 Heat Pump Tumble Dryer. This appliance is designed to provide professional drying results efficiently. Please read this manual carefully before using the appliance to ensure safe and optimal operation. Keep this manual for future reference.

2. Safety Information

Important Safety Instructions:

• Read all instructions before use.
• Do not install or store this appliance where it will be exposed to the weather.
• Do not tamper with controls.
• Do not repair or replace any part of the appliance or attempt any servicing unless specifically recommended in the user-maintenance instructions or in published user-repair instructions that you understand and have the skills to carry out.
• Keep the area around the exhaust opening and adjacent surrounding areas free from the accumulation of lint, dust, and dirt.
• Do not dry articles that have been previously cleaned in, washed in, soaked in, or spotted with gasoline, dry-cleaning solvents, or other flammable or explosive substances, as they emit vapors that could ignite or explode.
• Always disconnect the appliance from the power supply before cleaning or performing any maintenance.

3. Product Overview

Familiarize yourself with the components of your Haier tumble dryer.

Figure 3.1: Front view of the Haier I-Pro Series 7 HD100-A2979 Heat Pump Tumble Dryer. Shows the main body, control panel, and large dark-tinted door.

Figure 3.2: The tumble dryer with its door open, revealing the stainless steel drum and the lint filter located at the bottom of the door opening.

Figure 3.3: Close-up view of the digital control panel, featuring a central program selection dial, an LED display, and various touch-sensitive buttons for functions like 'My Time', 'I-Refresh', and 'Anti-crease'.

Figure 3.4: Detailed view of the 3-in-1 lint filter, designed to collect lint and fibers in a single, easy-to-access location within the dryer drum opening.

4. Setup and Installation

Proper installation is crucial for the performance and longevity of your dryer.

4.1 Unpacking

• Remove all packaging materials.
• Check for any transport damage. Report any damage to your retailer immediately.

4.2 Positioning

• Place the dryer on a firm, level floor.
• Ensure adequate ventilation around the appliance. Do not block the air inlets or outlets.
• Avoid direct sunlight and heat sources.

4.3 Electrical Connection

• Connect the dryer to a grounded power outlet (240 Volts).
• Ensure the power cord is not trapped or damaged.

4.4 Drainage Connection (Optional)

The dryer collects condensed water in a tank. For continuous drainage, connect the drain hose (if supplied) to a suitable drain point according to the instructions in the full manual.

5. Operating Instructions

5.1 Before Each Use

• Check and clean the lint filter.
• Empty the water collection tank (if not using continuous drainage).
• Ensure no foreign objects are in the drum.

5.2 Loading Laundry

• Open the dryer door.
• Load laundry loosely into the drum, ensuring not to overload (maximum capacity: 10 kg).
• Close the door firmly.

5.3 Program Selection

Turn the program selection dial (refer to Figure 3.3) to choose the desired drying program. Common programs include:

• Cottons: For cotton items.
• Synthetics: For synthetic and mixed fabrics.
• Delicates: For heat-sensitive items.
• Wool: Specific program for wool items.
• I-Refresh: Uses micro-steam and warm air to remove odors, allergens, and creases without damaging clothes.
• My Time: Allows adjustment of the drying cycle duration to suit specific needs.
• Shoe Basket: Use the included shoe basket for drying shoes without tumbling.

5.4 Starting a Cycle

• After selecting the program, press the Start/Pause button to begin the cycle.
• The display will show the estimated remaining time.

5.5 End of Cycle

• The dryer will signal the end of the cycle.
• Remove laundry promptly to minimize creasing.
• Clean the lint filter and empty the water tank after each cycle.

6. Maintenance and Cleaning

Regular maintenance ensures efficient operation and extends the life of your dryer.

6.1 Cleaning the Lint Filter

• The 3-in-1 filter (Figure 3.4) should be cleaned after every cycle.
• Pull the filter upwards to remove it.
• Open the filter and remove all accumulated lint.
• Rinse the filter under running water if necessary, and ensure it is completely dry before reinserting.

6.2 Emptying the Water Tank

• The water tank is usually located at the top left of the appliance.
• Pull out the tank and empty the collected water.
• Reinsert the tank firmly.

6.3 Cleaning the Condenser

The condenser should be cleaned periodically (e.g., monthly or every 20 cycles) to maintain drying efficiency. Refer to the full instruction manual for detailed steps on accessing and cleaning the condenser unit.

6.4 Exterior Cleaning

• Wipe the exterior surfaces with a soft, damp cloth.
• Do not use abrasive cleaners or solvents.

7. Troubleshooting

Before contacting service, check the following common issues:

8. Specifications

9. Warranty and Support

Your Haier I-Pro Series 7 HD100-A2979 Heat Pump Tumble Dryer comes with a manufacturer's warranty. Please refer to the warranty card included with your purchase for specific terms and conditions. For technical support, spare parts, or service requests, please contact Haier customer service or your authorized retailer. Ensure you have your model number (HD100-A2979) and serial number ready when contacting support.