ACCSTORE Black Canvas Wardrobe
ACCSTORE Canvas Wardrobe Cupboard Clothes Storage Organiser
Model: Black Canvas Wardrobe
Introduction
This manual provides comprehensive instructions for the assembly, operation, and maintenance of your ACCSTORE Canvas Wardrobe. Please read this manual carefully before assembly and use to ensure proper setup and longevity of the product.
Safety Information
WARNING:
- For small parts, keep out of reach of children to prevent choking hazards.
- Please be careful during assembly and dis-assembly to avoid injury.
- Avoid sun exposure, as it may reduce the service life of the product materials.
- Ensure all poles reach the bottoms of the plastic connector holes during assembly for stability.
Always wipe the product with a dry cloth for cleaning.
Product Overview and Components
The ACCSTORE Canvas Wardrobe is designed for efficient clothes storage, featuring hanging rails and multiple shelves. It is lightweight, portable, and easy to assemble.

Figure 1: Fully assembled ACCSTORE Canvas Wardrobe, showcasing its storage capacity with clothes, boxes, and other items.
Included Components:
| Component | Quantity | Description |
|---|---|---|
| Steel pipe | 76 pcs | Structural support for the frame. |
| Clothes rail | 2 pcs | For hanging clothes. |
| Plastic connectors | 44 pcs | Connects steel pipes to form the frame. |
| Compartment cloth | 14 pcs | Forms the shelves and internal dividers. |
| Cloth cover | 1 pcs | Outer fabric cover for the wardrobe. |
| Installation instruction | 1 pcs | This manual. |
Setup and Assembly
Assembly of the ACCSTORE Canvas Wardrobe is straightforward and requires no tools. Follow these steps carefully:
- Unpack all components and verify that all parts listed in the "Included Components" section are present.
- Begin by constructing the base frame using the steel pipes and plastic connectors. Ensure each pipe is fully inserted into the connector holes until it reaches the bottom.
- Continue building the vertical and horizontal sections of the frame, following the structure shown in the diagram below. Pay attention to the placement of connectors for shelves and hanging rails.
- Once the main frame is assembled, insert the compartment cloths to form the shelves. These cloths slide over the horizontal pipes.
- Install the two clothes rails in their designated positions at the top of the hanging sections.
- Finally, drape the cloth cover over the assembled frame. Secure the cover using the zippers and Velcro fasteners. The front door can be rolled up and secured for easy access.

Figure 2: Internal frame structure of the wardrobe, showing the arrangement of steel pipes, plastic connectors, and compartment cloths before the outer cover is applied.
Note: If you have left over parts after assembly, please store them away for future use or replacement.
Operating Instructions
The ACCSTORE Canvas Wardrobe is designed for versatile storage. Here's how to maximize its utility:
- Hanging Sections: Utilize the two hanging rails for longer garments such as dresses, coats, and shirts.
- Shelving Areas: The eight stacking areas are ideal for folded clothes, accessories, books, or storage bins.
- Side Pockets: The four pockets located on the sides of the wardrobe provide convenient storage for smaller items like keys, decorations, or frequently accessed articles.
- Dust Protection: Keep the front door zipped and secured with Velcro to protect your clothes from dust and maintain a tidy appearance.

Figure 3: The wardrobe positioned in a room, demonstrating its compact footprint and how it can integrate into various living spaces while providing ample storage.
Maintenance
To ensure the longevity and appearance of your ACCSTORE Canvas Wardrobe, follow these simple maintenance guidelines:
- Cleaning: Wipe the fabric surfaces and steel pipes with a dry cloth to remove dust and dirt. Do not use harsh chemicals or abrasive cleaners.
- Sun Exposure: Avoid placing the wardrobe in direct sunlight for extended periods, as this can cause the fabric to fade or degrade over time.
- Overloading: Do not overload the shelves or hanging rails beyond their capacity. Distribute weight evenly to maintain stability and prevent damage to the frame.
- Relocation: When moving the wardrobe, empty its contents first to reduce weight and prevent stress on the frame. Lift the wardrobe rather than dragging it.
Troubleshooting
If you encounter any issues with your ACCSTORE Canvas Wardrobe, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Wardrobe feels unstable or wobbly. | Pipes not fully inserted into connectors. Uneven weight distribution. | Press firmly on all pipe connections to ensure they are fully seated. Redistribute items evenly across shelves and hanging rails. |
| Fabric cover does not fit properly. | Frame assembled incorrectly or dimensions are off. | Disassemble and re-check the frame dimensions against the assembly diagram. Ensure all pipes are of the correct length for their position. |
| Zippers are stuck or difficult to move. | Fabric caught in zipper. Zipper mechanism dry. | Gently pull fabric away from the zipper path. Apply a small amount of zipper lubricant or wax to the teeth. |
Specifications
Detailed specifications for the ACCSTORE Canvas Wardrobe:
- Material Type: Non-woven fabric, steel pipe, and PP connector
- Color: Black
- Dimensions (L x W x H): 128 x 45 x 170 cm (connectors included)
- Item Weight: 3.3 Kilograms
- Number of Shelves: 6 (plus 2 hanging rails)
- Assembly Required: Yes
- Special Feature: Foldable
- Care Instructions: Wipe with Dry Cloth

Figure 4: Dimensional diagram of the wardrobe, indicating its length (128cm), width (45cm), and height (170cm).
Related Documents - Black Canvas Wardrobe
![]() |
Yorking Fabric Canvas Wardrobe Installation Manual - Assembly Guide Comprehensive installation manual for the Yorking Fabric Canvas Wardrobe. Details all accessories and provides step-by-step assembly instructions with visual descriptions for easy setup. |
![]() |
Simply Wardrobes Free Standing Wardrobe: Installation Guide Comprehensive installation instructions for the Simply Wardrobes Free Standing Wardrobe. Learn how to assemble your wardrobe step-by-step, including fitting panels, parts, tracks, and doors. |
![]() |
Floating Shelves Instruction Manual and Warranty Information This document provides instructions for installing floating shelves and details the two-year limited warranty provided by the manufacturer. It includes a parts list, step-by-step installation guides, and important safety warnings. |
![]() |
GY-130 Fabric Wardrobe Installation Guide Comprehensive installation instructions for the GY-130 fabric wardrobe by SMILOVII, detailing parts, precautions, and step-by-step assembly. |
![]() |
RackBuddy Logan Clothes Rail Installation Guide Step-by-step instructions for installing the RackBuddy Logan custom clothes rail between two walls, covering pipe sizing, fitting attachment, and final mounting. |
![]() |
Latitude Run® Modern 3-Door Armoire Wardrobe Assembly Instructions Detailed assembly instructions for the Latitude Run® dfou2522 modern 3-door armoire wardrobe with 2 drawers, including parts list, hardware list, and step-by-step guidance. |
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.





