MicroNovelty Ultra-Compact EVO Shaver User Manual

Introduction

This manual provides essential information for the safe and effective use of your MicroNovelty Ultra-Compact EVO Shaver. Please read this manual thoroughly before first use and retain it for future reference.

Image: The Ultra-Compact EVO Shaver held between two fingers, demonstrating its small, pocket-size design.

Important Safety Information

• Ensure the shaver is powered off before cleaning.
• Do not use under running water.
• To avoid skin irritation, use a clean, dry shaving surface.
• Do not charge near water or in damp conditions.
• This device contains a Lithium Polymer battery. Do not expose to extreme temperatures or direct sunlight.
• The EVO Shaver is not suitable for shaving long beards such as sideburns, nor is it intended for body hair removal.

Image: A visual guide illustrating suitable beard types (thin, short, new) and unsuitable beard types (bushy) for the EVO Shaver, emphasizing it's not for long beards or body hair.

Package Contents

Verify that all items listed below are present in your package:

• 1 x Ultra-Compact EVO Shaver
• 1 x USB-C Charging Cable
• 1 x Cleaning Brush
• 1 x Travel Pouch
• 1 x User Manual (this document)

Image: A flat lay showing the contents of the EVO Shaver package, including the shaver, charging cable, cleaning brush, and travel pouch, next to its retail box.

Product Features

• Superior Shaving System: Equipped with an ultra-thin 0.07 mm mesh and a high-speed 6000 RPM motor for a close, smooth, and safe shave.
• Mini Compact Design: Small and portable, designed for convenient travel and on-the-go use.
• Long-Lasting Battery: Provides up to 35 minutes of continuous use on a single charge, sufficient for approximately 20 shaving sessions.
• Universal Charging: Features a Type-C USB port for charging via wall charger, power bank, or laptop.
• Travel Lock Feature: Prevents accidental activation during transport.
• Easy to Clean: Removable blade mesh for rinsing under tap water or cleaning with the included brush.

Image: Close-up of the shaver's internal mechanism, highlighting the high-speed 6000 RPM motor for efficient shaving.

Image: Detailed view of the shaver's ultra-thin 0.07mm mesh, designed for a close shave.

Image: A visual comparison showing the compact size of the EVO Shaver next to a pair of wireless earbuds, indicating its lightweight and portable nature (approx. 60g).

Image: A man using the EVO Shaver to shave his neck, illustrating the device's ability to provide an ultra-close and comfortable shave.

Setup and Charging

Initial Charge

Before first use, fully charge the EVO Shaver.

1. Connect the provided USB-C charging cable to the shaver's charging port.
2. Plug the other end of the cable into a compatible USB power source (e.g., wall adapter, power bank, laptop).
3. The charging indicator light will illuminate. A full charge typically takes approximately 1.5 hours.
4. Disconnect the shaver once fully charged. Avoid overcharging to preserve battery life.

Image: The EVO Shaver connected to a USB-C charging cable, illustrating the charging process and highlighting its 35-minute continuous run time and support for over 20 shaving sessions per charge.

Operating Instructions

Power On/Off

To turn the shaver on, press the power button once. To turn it off, press the power button again.

Shaving

For optimal results, use the shaver on clean, dry skin. Gently press the shaver head against your skin and move it in small, circular motions or straight strokes against the direction of hair growth.

Image: A man using the compact EVO Shaver to shave his face, demonstrating its ease of use for a quick and clean shave.

Image: A collage showing various scenarios of using the EVO Shaver: for daily grooming, on the road, inside a car, and packed for a trip, emphasizing its versatility and portability.

Travel Lock

The travel lock feature prevents accidental activation of the shaver during transport.

• Activate Travel Lock: With the shaver off, press and hold the power button for 3 seconds until the indicator light flashes. The shaver is now locked.
• Deactivate Travel Lock: Press and hold the power button for 3 seconds again until the indicator light stops flashing. The shaver is now unlocked and ready for use.

Image: A hand demonstrating how to activate the travel lock feature on the EVO Shaver by pressing and holding the power button for 3 seconds.

Maintenance and Cleaning

Regular cleaning ensures optimal performance and hygiene.

1. Ensure the shaver is turned off and disconnected from any charging source.
2. Twist the blade mesh counter-clockwise to remove it from the shaver body.
3. Gently tap out any accumulated hair stubble.
4. Rinse the blade mesh under running tap water. Do not rinse the main body of the shaver.
5. Use the provided cleaning brush to remove any remaining stubble from the shaver's internal components and the blade.
6. Allow all parts to air dry completely before reassembling.
7. Align the blade mesh with the shaver body and twist clockwise to secure it.

Image: A split image showing the cleaning process: one side depicts rinsing the detached blade mesh under running water, and the other shows using the cleaning brush to clear stubble from the shaver's interior.

Troubleshooting

Specifications

Warranty and Support

Specific warranty details and customer support contact information are not provided within this manual. Please refer to the product packaging or the manufacturer's official website for warranty claims and support inquiries.