Introduction
This manual provides comprehensive instructions for the safe and efficient operation, installation, and maintenance of your Innoflame 48-inch Flush Mount Electric Fireplace, Model RV48D80F. Please read all instructions carefully before installation and use, and retain this manual for future reference.

Image: Front view of the Innoflame 48-inch Electric Fireplace, showcasing the crystal ember bed and integrated controls.
Safety Information
- Ensure the fireplace is connected to a properly grounded outlet.
- Do not operate the fireplace with a damaged cord or plug.
- Keep combustible materials at least 3 feet (0.9 meters) away from the front of the fireplace.
- Do not block air vents.
- Unplug the fireplace before performing any maintenance or cleaning.
Setup and Installation
The Innoflame RV48D80F is designed for flush mount, built-in installation. Careful planning of the installation location and proper ventilation are essential.
Dimensions and Clearance
Refer to the diagram below for precise measurements required for installation. Ensure adequate clearance around the unit for proper air circulation and heat dissipation.

Image: Dimensional drawing of the 48-inch electric fireplace insert, indicating a width of 48 inches, a height of 17 inches, and a depth of 5 inches.
- Overall Dimensions with Glass: 48 inches (Width) x 17 inches (Height)
- Base Dimensions: 46.5 inches (Width) x 15.375 inches (Depth) x 5.375 inches (Height)
- Product Dimensions (Overall): 46.5 x 15 x 5 inches
Electrical Connection
This unit operates on a standard corded electric power source. Ensure the electrical outlet meets the fireplace's power requirements and is easily accessible after installation.

Image: Rear view of the electric fireplace, illustrating the metal casing and integrated ventilation slots necessary for proper air flow during operation.
Operating Instructions
Your Innoflame electric fireplace can be operated using the control panel on the unit or the included remote control.
Remote Control Functions
The remote control provides convenient access to all fireplace features.

Image: The remote control for the electric fireplace, featuring buttons for power, flame effects, heat settings, and a timer function. Two AAA batteries are shown next to it.
- Power Button: Turns the fireplace ON or OFF.
- Flame Button: Cycles through various multi-color LED flame and ember bed effects.
- Heat Button: Adjusts the heat output. The fireplace provides up to 50,000 BTU of heat, capable of heating up to 1800 square feet.
- Timer Button: Sets an automatic shut-off timer for convenience.
Maintenance
Regular maintenance ensures the longevity and optimal performance of your electric fireplace.
- Cleaning: Ensure the unit is unplugged and cool before cleaning. Use a soft, damp cloth to wipe down the glass and exterior surfaces. Do not use abrasive cleaners.
- Ventilation: Periodically check that the air intake and exhaust vents are clear of dust and obstructions to maintain proper airflow.
- LED Lights: The LED lights for the flame and ember bed are designed for long-term use, with an estimated lifespan of 50,000 hours. Replacement is generally not required.
Troubleshooting
If you encounter issues with your fireplace, refer to the following common problems and solutions:
- No Power:
- Check if the power cord is securely plugged into a working electrical outlet.
- Verify that the circuit breaker has not tripped.
- No Heat Output:
- Ensure the heat function is activated via the control panel or remote.
- Check for any obstructions blocking the heater's air vents.
- Flame Effect Not Working:
- Confirm the unit is powered on.
- If using the remote, check and replace batteries if necessary.
- Remote Control Not Responding:
- Replace the batteries in the remote control.
- Ensure there are no obstructions between the remote and the fireplace's sensor.
If problems persist after attempting these solutions, please contact customer support.
Specifications
| Brand | Innoflame |
| Model Name | RV48D80F |
| Item Model Number | RV48D80F-C1 |
| UPC | 755580863230 |
| Product Dimensions | 46.5 x 15 x 5 inches |
| Item Weight | 31.5 pounds |
| Power Source | Corded Electric |
| Heat Output | 50,000 British Thermal Units |
| Heating Coverage | 1800 square feet |
| Special Features | Multi-color LED Flame & Ember Bed, Timer |
| Material | Glass |
| Installation Type | Built-in, Flush Mount |
| Included Components | Remote Control |
Warranty Information
The Innoflame RV48D80F Electric Fireplace comes with a Limited Warranty. For specific details regarding warranty coverage, terms, and conditions, please refer to the warranty card included with your product or contact Innoflame customer support directly. Keep your proof of purchase for warranty claims.
Customer Support
For technical assistance, replacement parts, or any questions not covered in this manual, please contact Innoflame customer support. Have your model number (RV48D80F) and purchase information ready when contacting support.
Contact information for Innoflame can typically be found on their official website or on the product packaging.


