1. Introduction
Thank you for choosing the Yaheetech Art Craft Drafting Table with Stool. This manual provides essential information for the safe assembly, operation, and maintenance of your new drafting table. Please read these instructions carefully before use and retain them for future reference.
2. Safety Information
WARNING: Exceeding the maximum load capacity may cause damage or injury. Use caution while moving and assembling the heavy table and stool. Follow assembly instructions for a safe setup.
- Ensure all components are present and undamaged before assembly.
- Assemble the product on a soft, clean surface to prevent scratches.
- Tighten all screws and bolts securely, but do not overtighten.
- Keep small parts away from children during assembly.
- Do not stand or sit on the tabletop.
- Distribute weight evenly on the tabletop and shelves.
- Regularly check all fasteners to ensure they remain tight.
3. Product Overview
The Yaheetech Art Craft Drafting Table is designed for various creative and professional tasks, featuring adjustable height and tilt, integrated storage, and a comfortable stool.
Image 1: The Yaheetech Art Craft Drafting Table and accompanying stool, showcasing its overall design and features.
Image 2: Detailed dimensions of the drafting table and stool, including tabletop length, width, height range, and stool dimensions.
4. Setup and Assembly
Assembly of the Yaheetech Art Craft Drafting Table requires careful attention to detail. While specific step-by-step instructions are typically provided in the packaging, here are general guidelines and key components to consider:
4.1 Unpacking and Component Check
Carefully unpack all components and lay them out on a clean, soft surface. Verify that all parts listed in your product's assembly guide are present and undamaged. If any parts are missing or damaged, contact customer support immediately.
4.2 Frame Assembly
Begin by assembling the main frame of the table. This typically involves attaching the legs to the crossbars using the provided hardware. Ensure all connections are stable before proceeding.
4.3 Tabletop and Adjustment Mechanism Installation
Attach the tabletop to the frame, paying close attention to the tilt and height adjustment mechanisms. These mechanisms allow for flexible positioning of the tabletop.
Image 3: Close-up view of the tabletop's tilt adjustment mechanism, showing the notched bar for angle selection.
4.4 Storage Components and Accessories
Install the fabric drawers, retractable auxiliary surface, and integrated stationery holders. Ensure the pencil ledge is correctly attached and can be adjusted.
Image 4: Detail of the integrated pen holder, cup groove design, and the triangle buckle for adjustable lift.
Image 5: View of the retractable two-level desktop, fixed anti-skid base, and anti-scratch foot pad design.
Image 6: Instructions for lifting and retracting the adjustable pencil ledge to secure items on the tilted surface.
4.5 Stool Assembly
Assemble the stool according to its specific instructions, ensuring the legs are securely attached to the seat and the footrest ring is stable.
Image 7: Close-up of the stool's faux leather seat, highlighting its soft and comfortable padding.
4.6 Assembly Video
Video 1: An overview of the Yaheetech Drafting Table, demonstrating its features and assembly process. This video is provided by Yaheetech.
5. Operating Instructions
5.1 Adjusting Table Height
To adjust the table height, locate the adjustment knobs on the legs of the table. Loosen the knobs, carefully raise or lower the tabletop to your desired height, and then securely tighten the knobs to lock the table in place. The table height is adjustable from 69.5 cm (27.5 inches) to 92.5 cm (36.5 inches).
5.2 Adjusting Tabletop Angle
The tabletop can be tilted from 0 to 60 degrees. To adjust the angle, lift the tabletop slightly and engage the support mechanism into the desired notch. Ensure the tabletop is securely locked at the chosen angle before placing items on it.
Image 8: The tabletop shown at various tilt angles, illustrating its 0-60 degree adjustability for different tasks like writing, reading, and drawing.
5.3 Using the Retractable Auxiliary Surface
The retractable auxiliary surface can be pulled out to provide additional workspace for a laptop, reference materials, or other items. Push it back in when not needed to save space.
5.4 Utilizing Storage Options
- Drawers: Use the two nonwoven fabric drawers for storing mobile devices, small tools, or documents.
- Stationery Holders: The detachable tabletop side tray has separate slots for pens, brushes, and other small stationery items.
- Bottom Shelf: The metal shelf below the drawers is suitable for storing drawing drafts, paint cans, or other supplies.
6. Maintenance
- Cleaning: Wipe the table surfaces with a soft, damp cloth. Avoid harsh chemicals or abrasive cleaners that could damage the finish.
- Fasteners: Periodically check all screws and bolts to ensure they are tight. Re-tighten as necessary to maintain stability.
- Moving: When moving the table, lift it rather than dragging it to prevent damage to the floor or the table's anti-scratch foot pads.
- Drawers: The nonwoven fabric drawers can be spot cleaned with a mild detergent if needed.
7. Troubleshooting
7.1 Table Instability
- Issue: The table feels wobbly or unstable.
- Solution: Check all assembly screws and bolts. Ensure they are fully tightened. Verify that the table is on a flat, even surface. Adjust the anti-scratch foot pads if necessary to level the table.
7.2 Difficulty Adjusting Height or Tilt
- Issue: The tabletop height or tilt mechanism is stiff or difficult to operate.
- Solution: Ensure adjustment knobs are fully loosened before attempting to change position. Check for any obstructions in the mechanism. Apply a small amount of silicone lubricant to moving parts if stiffness persists.
7.3 Damaged or Ripped Drawers
- Issue: The fabric drawers are damaged.
- Solution: While the drawers are made of nonwoven fabric, they are designed for light storage. Avoid overloading them or storing sharp objects that could cause tears. If replacement is needed, contact Yaheetech customer support.
8. Specifications
| Feature | Detail |
|---|---|
| Brand | Yaheetech |
| Model | B08PK7N9YY |
| Overall Table Dimensions (LxWxH) | 120.5 x 60 x (69.5-92.5) cm / 47.5 x 23.6 x (27.5-36.5) inches |
| Stool Dimensions (Dia.xH) | 30 x 51 cm / 12 x 20 inches |
| Material | Iron, MDF, PVC veneer, nonwoven fabric |
| Tilting Tabletop Angle Adjustment | 0-60 degrees |
| Table Load Capacity (Max) | 100 kg / 220.5 lb |
| Color | Black |
| Number of Drawers | 2 |
| Required Assembly | Yes |
9. Warranty Information
This Yaheetech product comes with a Limited Warranty. Please refer to the warranty card included with your purchase or visit the official Yaheetech website for detailed terms and conditions regarding coverage and duration.
10. Customer Support
For any questions, concerns, or assistance with your Yaheetech Art Craft Drafting Table, please contact Yaheetech customer support. You can typically find contact information on the product packaging, the brand's official website, or through your point of purchase.
