1. Introduction
This manual provides essential instructions for the safe and effective use of your elxjar 4.8V 800mAh Ni-Cd rechargeable battery pack. This battery is designed to provide reliable backup power for compatible emergency and exit lighting systems. Please read this manual thoroughly before installation and use, and retain it for future reference.
2. Safety Information
WARNING: Improper use of batteries can result in fire, explosion, or other hazards. Always follow these safety guidelines:
- Do not disassemble, crush, puncture, or short-circuit the battery.
- Do not expose the battery to high temperatures (above 60°C / 140°F) or direct sunlight.
- Do not incinerate or dispose of the battery in fire.
- Do not immerse the battery in water or other liquids.
- Use only with a compatible 4.8V Ni-Cd or Ni-MH charging system. Using an incompatible charger may damage the battery or cause hazards.
- Keep batteries out of reach of children.
- If the battery leaks, avoid contact with skin and eyes. In case of contact, wash immediately with plenty of water and seek medical advice.
- Recycle or dispose of batteries properly according to local regulations.
Important: Upon delivery, the battery is not fully charged. Charge overnight before initial use to prevent injury or burns. Do not allow metal objects to contact or short circuit the battery terminals.
3. Product Overview
The elxjar 4.8V 800mAh Ni-Cd rechargeable battery pack is engineered for reliable performance in critical safety applications. It provides stable power for emergency and exit lighting systems.
- High-Quality Power Source: 4.8V 800mAh Ni-Cd rechargeable battery pack.
- Reliable Performance: Provides stable and consistent power output.
- Durable Construction: Built with high-quality Ni-Cd cells for extended service life.
- Energy: 3.84Wh.
- Cell Configuration: AAA cells.


4. Setup and Installation
Before installing the new battery, ensure the power to the emergency or exit lighting system is turned off and disconnected from the main power supply. Always refer to the specific instructions for your lighting fixture for proper battery replacement procedures.
- Verify Compatibility: Ensure this elxjar battery is compatible with your specific emergency or exit lighting system. Check your original battery's model, voltage, dimensions, connector type, and polarity.
- Disconnect Old Battery: Carefully disconnect the old battery from the lighting unit. Note the orientation of the connector.
- Insert New Battery: Connect the new elxjar battery to the lighting unit, ensuring the connector is properly seated and the polarity (red wire to positive, black wire to negative) matches.
- Secure Battery: Place the battery securely within the designated compartment of the lighting fixture.
- Initial Charge: After installation, connect the lighting system to its power source and allow the battery to charge overnight (typically 24 hours) before its first use. This ensures the battery reaches its full capacity.


Compatible Models: 48H465, 6CGL4, 6CGL3, Lumapro exit signs, UNITECH C14, ELSC-17923, 2472948.
5. Operating Instructions
This battery functions as a backup power source for emergency and exit lighting. Once installed and fully charged, it will automatically provide power to the lighting system during a power outage or when the main power supply is interrupted.
- The battery is designed for repeated charging and discharging cycles within a compatible charging system.
- Ensure the lighting fixture's charging circuit is operational to maintain the battery's charge.
- Regularly test your emergency lighting system as per local safety regulations to ensure the battery backup is functioning correctly.


6. Maintenance
Proper maintenance ensures the longevity and optimal performance of your battery.
- Regular Testing: Perform routine tests of your emergency lighting system as recommended by the fixture manufacturer and local safety codes. This typically involves simulating a power outage to ensure the battery provides power for the required duration.
- Cleaning: Keep the battery and its terminals clean and free from dust or corrosion. Use a dry cloth for cleaning.
- Storage: If storing the battery for an extended period, ensure it is fully charged and store it in a cool, dry place away from direct sunlight and extreme temperatures. Recharge every 3-6 months to prevent deep discharge.
- Replacement: Batteries have a finite lifespan. Replace the battery when it no longer holds a charge effectively or fails to meet the required backup duration during testing.
7. Troubleshooting
If you encounter issues with your elxjar battery, consider the following:
- Battery Not Charging:
- Ensure the battery is correctly connected to the lighting fixture.
- Verify the lighting fixture's charging circuit is operational.
- Confirm the battery is compatible with the fixture's charging system (4.8V Ni-Cd/Ni-MH).
- Allow sufficient time for initial charging (overnight).
- Short Backup Duration:
- The battery may not be fully charged. Ensure it has been charged for the recommended duration.
- The battery may be nearing the end of its lifespan and require replacement.
- Verify the battery capacity (800mAh) meets the requirements of your lighting system.
- Battery Does Not Fit:
- Double-check the dimensions of the elxjar battery against your original battery and the fixture's compartment.
- Ensure the connector type and polarity match your fixture.
- No Power Output:
- Check for loose connections or damaged wires.
- Ensure the battery is fully charged.
- The battery may be faulty or completely discharged beyond recovery.
If troubleshooting steps do not resolve the issue, please contact customer support.
8. Specifications
| Feature | Detail |
|---|---|
| Brand | elxjar |
| Model | 4.8V 800mAh Ni-Cd Battery |
| Battery Cell Composition | Ni-Cd (Nickel Cadmium) |
| Voltage | 4.8 Volts |
| Battery Capacity | 800 mAh |
| Energy | 3.84 Wh |
| Reusability | Rechargeable |
| Number of Batteries | 2 AAA batteries required (included in 2-pack) |
| Recommended Uses | Emergency & Exit Lighting Systems |
| Compatible Models | 48H465, 6CGL4, 6CGL3, Lumapro, UNITECH C14, ELSC-17923, 2472948 |
| Dimensions (approx.) | 44.8mm (1.76 in) Length, 21.9mm (0.86 in) Width/Height |
| Weight (approx.) | 52g (1.83 oz) per battery |
| UPC | 723509655273 |
9. Warranty and Support
Warranty: This product comes with a 30-day money-back guarantee and a 24-month warranty from the date of purchase. This warranty covers manufacturing defects under normal use.
Customer Support: For any questions, concerns, or warranty claims, please contact elxjar customer support through the retailer where the product was purchased. Please have your purchase details and product model information ready.