Hansshow Model 3/Model Y Kick Sensor Automatic Power Trunk User Manual

1. Product Overview

The Hansshow Kick Sensor Automatic Power Trunk system provides a convenient, hands-free method for opening and closing the trunk of your Tesla Model 3 or Model Y. This system integrates seamlessly with your vehicle's existing power trunk mechanism, allowing operation via a simple foot gesture.

Image: A man approaches a red Tesla Model Y with its trunk automatically opening, demonstrating the hands-free operation of the kick sensor system.

Key Features:

• Hands-free trunk operation via foot kick.
• Compatible with Tesla Model 3 (2017-2020) and Model Y (2020-2021).
• Durable components, including German-imported springs and high-quality aluminum alloy pillars.
• Multiple control methods: screen, trunk button, key fob, and mobile app.

Image: An illustration highlighting the high-quality German-imported springs and robust aluminum alloy pillars used in the Hansshow power trunk system, emphasizing durability and performance.

2. Package Contents

Before installation, please verify that all components are present and undamaged.

Image: A detailed view of the Hansshow kick sensor system components, including the main control box, the kick sensor module, and various wiring harnesses required for installation.

Typical Components:

• Main Control Module
• Kick Sensor Unit
• Wiring Harnesses (Power, Signal, etc.)
• Mounting Hardware

3. Setup and Installation

Installation of the Hansshow Kick Sensor Automatic Power Trunk system requires basic automotive electrical knowledge and tools. It is recommended to have the installation performed by a qualified professional if you are not comfortable with car modifications.

Installation Steps (General Guide):

1. Preparation: Ensure the vehicle is turned off and the 12V battery is disconnected to prevent electrical shorts.
2. Locate Installation Area: Identify the appropriate mounting location for the kick sensor, typically under the rear bumper or near the trunk area, ensuring it is clear of obstructions.
3. Mount Sensor: Securely mount the kick sensor unit. Ensure the sensor is oriented correctly as indicated by any 'UP' markings.


Image: The Hansshow kick sensor module, clearly labeled with "This is UP" for correct orientation, and showing the wiring instructions for Red (12V), Black (GND), White (Acc optional), and Green (Handle clasp button signal) wires.

4. Wiring Connections:
   • Connect the Red wire to a 12V power source.
   • Connect the Black wire to a Ground (GND) point.
   • The White wire is for Accessory (ACC) optional connection.
   • The Green wire is for the Handle clasp button signal wire.
   

   Image: A close-up view of the robust electrical connectors used in the Hansshow kick sensor system, designed for secure and reliable connections within the vehicle's electrical system.

5. Connect Main Control Module: Integrate the main control module with the vehicle's power trunk system and the newly installed kick sensor, following the provided wiring diagram specific to your vehicle model.
6. Test Functionality: Reconnect the 12V battery and test the system's functionality before reassembling any removed panels.
7. Secure Wiring: Ensure all wiring is neatly routed and secured to prevent damage or interference.

Note: Refer to the detailed wiring diagram provided with your specific product package for precise connection points and instructions for your Tesla Model 3 or Model Y.

4. Operating Instructions

The Hansshow Kick Sensor Automatic Power Trunk system offers multiple ways to operate your vehicle's trunk.

4.1. Kick Sensor Operation:

To open or close the trunk using the kick sensor:

1. Stand behind the vehicle, approximately 1-2 feet from the rear bumper.
2. Perform a quick, single kick motion directly under the center of the rear bumper. Do not linger your foot under the sensor.
3. The trunk will automatically open or close. Step back immediately after the kick to allow the trunk to operate freely.

Image: The rear of a Tesla Model 3, with blue arrows pointing to the area under the bumper where the kick sensor is typically installed and activated.

Image: A Tesla Model 3 trunk in the process of opening, with a blue arrow illustrating the upward motion, activated by the kick sensor.

4.2. Other Control Methods:

In addition to the kick sensor, the power trunk can still be operated using the following methods:

• Vehicle Touchscreen: Operate the trunk directly from your Tesla's central display.
• Trunk Button: Use the physical button located on the trunk lid.
• Key Fob: Utilize your Tesla key fob for remote trunk access.
• Mobile App: Control the trunk via the official Tesla mobile application.

Image: A collage showcasing the various methods to control the Tesla power trunk, including interactions with the vehicle's touchscreen, the physical trunk button, the key fob, and the mobile application.

5. Maintenance

The Hansshow Kick Sensor Automatic Power Trunk system is designed for minimal maintenance. However, following these general guidelines can help ensure its longevity and optimal performance:

• Keep Sensor Area Clean: Regularly inspect and clean the area around the kick sensor under the bumper to ensure it is free from dirt, debris, snow, or ice that could obstruct its operation.
• Check Connections: Periodically check all wiring connections to ensure they are secure and free from corrosion.
• Avoid Physical Damage: Protect the sensor and control module from physical impact or excessive moisture. The main control unit is designed to be waterproof.

Image: The Hansshow control module shown partially submerged in water, illustrating its waterproof design for enhanced durability and protection against environmental elements.

6. Troubleshooting

If you encounter issues with your Hansshow Kick Sensor Automatic Power Trunk system, consider the following troubleshooting steps:

Common Issues and Solutions:

• Trunk Not Responding to Kick:
  • Ensure the kick motion is quick and directly under the sensor area.
  • Check for any obstructions (dirt, snow, ice) on or around the sensor.
  • Verify all wiring connections are secure and properly seated.
• Trunk Opens/Closes Partially or Incorrectly:
  • Check for any physical obstructions in the trunk's path.
  • Ensure the power struts are not damaged or bent.
  • If the issue persists, a recalibration or system reset may be required (refer to specific product instructions or contact support).
• System Not Powering On:
  • Verify the 12V power connection and ground are correctly established.
  • Check for any blown fuses in the vehicle's electrical system related to the trunk or accessory power.

If these steps do not resolve the issue, please contact Hansshow customer support for further assistance.

7. Specifications

8. Warranty and Support

For specific warranty terms and conditions, please refer to the documentation included with your purchase or contact Hansshow directly. Warranty coverage typically addresses manufacturing defects.

Customer Support:

If you require technical assistance, have questions about installation, or need to report an issue, please contact Hansshow customer support through their official channels. You can often find contact information on the manufacturer's website or the product packaging.

Visit the official Hansshow store for more information: Hansshow Store on Amazon