AVMATRIX PKC2000 Network 4D Joystick PTZ Camera Controller

1. Introduction

This manual provides detailed instructions for the setup, operation, and maintenance of the AVMATRIX PKC2000 Network 4D Joystick Controller. The PKC2000 is designed for precise control of PTZ (Pan-Tilt-Zoom) cameras over an IP network, offering intuitive joystick and keyboard functions for professional video production environments.

1.1 Package Contents

• AVMATRIX PKC2000 Controller
• Power Adapter
• Ethernet Cable
• User Manual (this document)

Note: The images provided in the product data are for a different AVMATRIX product (PVS0613U Portable 6 Channel Multi-Format Streaming Switcher) and are not relevant to the PKC2000 Network 4D Joystick Controller. Therefore, no product images are embedded in this manual.

2. Safety Information

To ensure safe operation and prolong the lifespan of your AVMATRIX PKC2000 controller, please observe the following safety precautions:

• Power Supply: Use only the provided power adapter. Ensure the power source matches the specified voltage.
• Environment: Operate the device in a dry, well-ventilated area. Avoid exposure to moisture, extreme temperatures, direct sunlight, or strong vibrations.
• Handling: Do not drop or subject the unit to severe impact. Avoid placing heavy objects on the controller.
• Cleaning: Disconnect power before cleaning. Use a soft, dry cloth. Do not use liquid or aerosol cleaners.
• Servicing: Do not attempt to open or repair the unit yourself. Refer all servicing to qualified personnel.

3. Product Features

The AVMATRIX PKC2000 Network 4D Joystick Controller offers a comprehensive set of features for efficient PTZ camera management:

• 4D Joystick Control: Provides intuitive control over Pan, Tilt, Zoom, and Focus functions.
• Network (IP) Control: Manages multiple PTZ cameras over a standard IP network.
• Multi-Protocol Support: Compatible with various control protocols, including VISCA over IP and ONVIF.
• Preset Management: Allows saving and recalling camera positions with dedicated buttons.
• Camera Selection: Quick access buttons for selecting and switching between multiple connected cameras.
• Camera Parameter Adjustment: Direct control over exposure, white balance, and other image settings.
• LCD Display: Provides real-time status information and menu navigation.
• Ergonomic Design: Comfortable layout for extended operation.

4. Panel Layout

The PKC2000 controller features a logical layout for ease of use. Key components include:

• 4D Joystick: Located on the left, for Pan, Tilt, Zoom (rotation), and Focus (twist).
• LCD Display: Central display for menu navigation and status.
• Camera Select Buttons: Labeled CAM1, CAM2, etc., for switching control between cameras.
• Numeric Keypad: For entering camera IDs, IP addresses, and preset numbers.
• Preset Buttons: For saving and recalling camera presets.
• Function Buttons: Dedicated buttons for exposure, white balance, focus mode, and other camera settings.
• Menu/Navigation Buttons: For accessing and navigating the controller's internal menu system.
• Power Switch: Typically located on the rear panel.
• LAN Port: RJ45 connector for network connection, usually on the rear panel.
• DC Power Input: For connecting the power adapter.

5. Setup

Follow these steps to set up your AVMATRIX PKC2000 controller:

1. Power Connection: Connect the provided power adapter to the DC power input port on the rear of the controller, then plug the adapter into a suitable power outlet.
2. Network Connection: Connect an Ethernet cable from the LAN port on the controller to your network switch or router. Ensure your PTZ cameras are connected to the same network.
3. Initial Power On: Flip the power switch (usually on the rear panel) to the 'ON' position. The LCD display will illuminate, indicating the controller is starting up.
4. Network Configuration:
   • Press the MENU button to access the system settings.
   • Navigate to the 'Network Settings' or 'IP Settings' section using the navigation buttons.
   • Configure the controller's IP address, subnet mask, and gateway to match your network's requirements. This can be done manually (Static IP) or automatically (DHCP, if supported by your network).
   • Save the settings and exit the menu.
5. Camera Pairing:
   • From the main menu or a dedicated 'Camera Management' section, add your PTZ cameras.
   • For each camera, enter its IP address, control protocol (e.g., VISCA over IP, ONVIF), and any necessary login credentials.
   • Assign each camera to a specific CAM button on the controller (e.g., CAM1 for Camera 1, CAM2 for Camera 2).
   • Verify connectivity by selecting a camera and attempting basic control.

6. Operating Instructions

Once set up, the PKC2000 provides intuitive control over your PTZ cameras:

6.1 Camera Selection

Press the desired CAM button (e.g., CAM1, CAM2) to select the camera you wish to control. The selected camera's ID or name will typically be displayed on the LCD.

6.2 Joystick Control

• Pan & Tilt: Move the joystick left/right to pan the camera horizontally. Move the joystick up/down to tilt the camera vertically. The speed of movement is proportional to how far the joystick is pushed.
• Zoom: Rotate the joystick clockwise to zoom in (tele) and counter-clockwise to zoom out (wide).
• Focus: Twist the joystick head (often a separate ring or knob on the joystick) to adjust the camera's focus. Ensure the camera's focus mode is set to manual if you wish to override auto-focus.

6.3 Preset Management

• Saving a Preset: Position the selected camera to the desired view using the joystick. Press the SET button, then press one of the numeric preset buttons (e.g., 1, 2, 3) to save the current position to that preset number.
• Recalling a Preset: Select the desired camera, then simply press the numeric preset button (e.g., 1) corresponding to the saved position. The camera will automatically move to that preset.

6.4 Exposure and White Balance

Use the dedicated function buttons or navigate through the menu to adjust camera parameters:

• Exposure: Adjust modes (Auto, Manual, Shutter Priority, Iris Priority), Iris, Gain, and Shutter Speed.
• White Balance: Select modes (Auto, Indoor, Outdoor, Manual) and fine-tune color temperature.

6.5 OSD Menu Control

Press the MENU button to access the selected camera's On-Screen Display (OSD) menu. Use the navigation buttons (up, down, left, right, enter) on the controller to navigate and adjust settings within the camera's OSD.

7. Maintenance

Proper maintenance ensures the longevity and reliable performance of your PKC2000 controller:

• Cleaning: Regularly wipe the surface of the controller with a soft, dry, lint-free cloth. Avoid abrasive cleaners or solvents.
• Storage: When not in use for extended periods, store the controller in a cool, dry place, away from direct sunlight and dust.
• Joystick Care: Keep the joystick mechanism free from dust and debris. Avoid applying excessive force.

8. Troubleshooting

If you encounter issues with your PKC2000 controller, refer to the following common problems and solutions:

If the problem persists after attempting these solutions, please contact AVMATRIX technical support or your authorized dealer.

9. Specifications

Please refer to the product packaging or the official AVMATRIX website for the most accurate and up-to-date specifications for the PKC2000 Network 4D Joystick Controller. General specifications typically include:

• Control Interface: 4D Joystick, Numeric Keypad, Function Buttons
• Control Protocol: VISCA over IP, ONVIF (and others as supported)
• Network Interface: 1x RJ45 Ethernet port
• Power Supply: DC 12V (via external power adapter)
• Operating Temperature: 0°C to 40°C (32°F to 104°F)
• Dimensions: (Refer to product documentation)
• Weight: (Refer to product documentation)

10. Warranty and Support

For detailed warranty information, product registration, and technical support, please visit the official AVMATRIX website or contact your authorized AVMATRIX dealer. Keep your purchase receipt as proof of purchase for warranty claims.